Improvements On Cam Strategies for CNC machining Guitar Bodies with Fusion360
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- I've tried to improve on cam strategies for machining guitar bodies. Now I am using different tools to get the machining time down to about 30 minutes per side, including a long shaping process.
Also I go into detail on how I setup each strategy in Fusion360 and how I exported the files to my CNC machine.
You will also see the actual machining of it on my DIY CNC machine as well as you will see the endresult.
I hope this is helpful to you!
If you have any questions or tips to improve on, I'll be glad to hear from you!
Contents:
00:00 Introduction
01:04 Tools
04:06 Clamping nut tip
05:02 Dowelholes CAM
06:26 Bottom side CAM
14:47 Topside CAM
15:51 Generating Split GCODE files
16:49 Machining the body
23:20 Sanding the body
23:41 The final result
The tools used:
ChaRLes flat end mills
www.amazon.nl/gp/product/B07H...
DingGreat Round Nose tools
www.amazon.nl/gp/product/B07Z...
And 2 standard 2 flute 6mm VHM flat end tools.
Check out my website for some more info in machining guitars: www.audiohotshot.nl
A link to my previous article about CAM:
www.audiohotshot.nl/cnc-machi...
For more info on my machine:
www.audiohotshot.nl/howto-how...
/ audiohotshotblog
/ audiohotshot - แนวปฏิบัติและการใช้ชีวิต