Eastonmade 40C FIREWOOD PROCESSOR and THE NEW 12 WAY WEDGE!!
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2024
- It is here..... the all new Eastonmade 40c Firewood processor! This is the most advanced machine for making firewood on the market and they are now ready for production!!
- แนวปฏิบัติและการใช้ชีวิต
Was great to have a visit again chris. Appreciate the support
Yup, same here!
I hope that's mine one day. Thanks guys for the informative walk-around. Andrew knows his stuff. And enjoyed meeting him at the Bunyan Show
Nice!
It is so cool how folks flock to these awesome machines at the shows when they hear them fire up! They drop whatever they are doing and beeline for the Eastonmade area!👍
There has already been alot of improvements made to this unit just since the video was made and more to come! I will keep my fingers crossed that one of the first units ends up In the Woodyard for final testing!🤞
You got that right!
Since then, the 40C has been updated with a chain infeed because of belt tracking issues. Plus a bigger 75hp engibe is planned to make it run the way Andrew wants it to run. Only a $5000 price increase with the bigger engine and other minor changes.
good to know!
This is the way the splitter needs to be explained to people like me!! Slowly learning how to wonderful these machines are!! It'll look good IN THE WOODYARD!!!!! Stay Hydrated and Have a Safe Day
Yup, nice machines!
Nice machine. That 12 way really makes a pile of quick.
yup!
Awesome vid that day Chris! Was great to see the 40c! See a few videos on Andrew’s channel as well talking about it! Really like it! 🔥💯👍. See you soon! Andrew from NB :)
Thanks!!
G’morning Chris. I’ll take 2, send them my way ! Hahahaaaa.
Most sweetest.
GoodNightIrene
Nope, you are getting 3 or none!
Thank You for sharing Andrew and Chris.
Awesome engineering marvel on both machines.
Yup, thanks for watching!
Good morning.
Hello!
Nice promotional video Chris. I have no experience with processors (and really don't want any), but that machine looks so much easier to operate than the one you're using. I like that the controls are at ground level where you have a better view and easy access to the split chamber. Electric over hydraulic vs manual hydraulic valving means lots of electrical wires for the rodents to chew on. Oh yeah, you have cats to control that problem!
Yup, cats working!
Gotta say, I’m glad to have found this channel, you’ve got yourself a subscriber
Thanks Kyle, 1200 videos and a new one on the channel every morning, you have work to do!!! Thanks!
Very nice new Eastonmade 40c like it Chris ( ty Ron )
Yup, nice!
That right there is a thing of beauty for sure!
Yup!
Awesome machine!
Yup!
Good morning all!
Good morning!
That's a beauty. Love that it's got yanmar engine, so good on fuel.
Yup!
Good morning Chris!!😀😀
The 40c is definitely a nice possessor. But I would still take the 22mb over it. The 40c dosen't have the door to dump out your cutoff and if hit a tree stand step or a gate hanger in a log. The blade will be junk and you will have to replace it. If it had replaceable teeth it wouldn't be so bad.
I saw they have already gotten rid of the rubber indeed belt. Witch I think is a good thing.
There is also a little too much electronics to deal with compared to the 22mb.
Take care my friend. 😀😀💚💚
Logger Al
yup.
That is one sweet machine Chris , one could make an enclosure if you thought you needed one. Keep on cutting
Yup, nice machine!
Goodmorning from Alabama every one.
Hello!
Nice processer
Yup!
Like these machines eastonmade got it going
yup!
Good morning
hello!
Hi Chris,Ed from Vermont
Hello Ed!
With a 12 way split you wouldn't have to do resplitting looks like the perfect size wood.
Maybe so!
They going to let you have one to show off on TH-cam?
This new machine would be nice in your wood yard.
We will see!?
WOW, cool machine, Not sure why the giant saw spooks me a bit, versus the chainsaw on your home machine, maybe I'm just used to the chainsaw. Pretty cool looking, Great that they are making machines in other sizes and price points. literally a commercial grade machine to fit any size wood yard operation.
Yup, it is a great machine!!
It was pretty cool even with the glitches.
Yup!
That is one sweet lookin, money makin, well built, value holding piece of work.... Andrews team gets better every year!!
Yup!
Nice looking machine Chris.. too bad this would fill up my small Woodyard the second it arrived..🤣👍
Yup, that could happen!
Good morning everyone
Hello!
I can see a couple of issues compared to the unit Chris already as" 1) no quick access to hold a log on the conveyer with the pickaroon when more than one log roll on the conveyer 2) may have issues with the belt not properly aligning 3) the more electronics you have the more of a probability of breakdown. On the positive side, 1) no oiling of the chain, 2) less frequent charpenning especially if you have a carbide tip saw blade
They made some changes to it since. The belt was changed out for a chain and it should be less likely to get a double on belt.
Maybe??
I wish you could get Eastonmade products in the UK.
For a price you can get anything you want, you just have to have a lot of want.
I am waiting on the CANZUK free trade agreement that the Canadians seem pretty keen on.@@InTheWoodyard
I would love to have access to that machine but I’m waiting for my rich uncle to get out of the poorhouse!!!!!
Ha! Good one!
Hi. Chris
Hello there Ralphy Baby!!!!!!
👍👍👍
Thanks!!!
Good Morning Woodhounds!!
Hello!
I wonder if Eastonmade added a mount for a patio umbrella near the control station like they have on some of their horizontal splitters. It will certainly help in the heat of the summer and the rain.
As Andrew demonstrated it also needs a drink holder.😉🤪
@@iffykidmn8170 That too. LOL
ha!
Maybe so!
16 way
yup!
🤘
Thanks!
Yeah sure a 12 way is great,
Yadda ,yadda, yadda,
But the individual ideal splits need to be smaller, not everyone wants boiler wood.
And also, it needs two saw blades , 16 inches apart ( adjustable)
Wit ha 36" throw ram.
To make two cuts simultaneously and then drop two rounds into the ram chute ..
I think Adam makes boiler wood sized wedges intentionally in hopes you will purchase an
AXIS for the resplits.
The great thing about having that would be, it would require a 16,000 lb. Truck to relocate it. 😊 I am picturing a brand new ,bright and shiny Chevy C6500 cab over with a two cord capacity dump bed and 65 gallon fuel capacity.
You are clueless and just like hearing yourself yap
okay.
Big tip don’t put coffee on controls 🧐
Yup, good tip!
That 40 C is sweet but that 60C!
both great machines!
Did you order one of those 12 way wedges. Fewer if any resplits.
No, not yet.
👍🏻👏
Thanks!
Would You Consider the New 12 Way wedge or 16 Way Wedge for your Easton Made 22MB, Or would trade in the 4 6 the old 12 way wedge for the new 12 and 16 Way Wedge, Have a Good Day Chris,
I have a 4,6,8,and 12 way now. But the new 16 would be nice.
When are you getting yours Chris?
Ha!!!
I don’t want processors to go computerized. Will break and we can’t fix it. Like trucks these days. We are going towards unfixable in so many areas unless you have the right computer and software
Maybe ???
Chris, didn't he say it was a 16 way wedge?
maybe so??
😊😊😊😊😊😊
Thanks for watching!
Sticker price logs.
yup
Hello
Hello!
I'm just here to see how long it takes someone to bitch about Chris trying to sell things 😂
lol, that damn guy!
Well, I guess in Chris's defense, there is always someone telling him what he needs to purchase 🤣🤣
I think you answered your own question.😉
Yup, some people will complain if you give them a $100 bill with a fold in it!
yup
Good morning.
Hello!