Mine ticks twice then just spins. I tried increasing the weight of the wheel but that didn't help. Might be something with the escapement, but I can't figure it out. Any ideas?
yooo bro i built this and i made the bearing insert.. i have bearings now i made some bb 3d printed ones.. my bearings and bearing piece is still left over after i finished the build.. did we not use the bearing in this model?? on the video you showed that we will need it then you set it aside and we never seen it again. Thank you a ton for helping me build this! This is my very first tourbillon build!
Hello sir I watched your video and i can say that it really cool and amazing i love this project so much and i want it too ❤but sadly i dont have the printer machine and i saw some websites on Facebook page they have the printer and they can print like this watch but they don't have a file 😢 may i have your 3D file of this watch beacuse i would like to get it so much❤🙏🙏
I believe that doing that would be by somehow adding a battered motor or making the design for the wind-up bigger/more efficient. But otherwise no because that would count as a perpetual motion. And it's almost impossible to make that with the tech we have now.
@@Nordic_Redhead Actually is impossible to create perpetual motion machine as an independent closed loop system without violating the second law of thermodynamics.
I know you made this comment 8 days ago, but if your still looking for the measurements, 2 should be 17mm and 1 should be 22mm. These sizes worked for me.
What would be really cool is if you could set it to go start and stop at exactly 1 minute intervals, that way it’s a minute timer, so it has a viable function, albeit novelty and also complicated, but let’s face it, nobody’s saying how pointless it is to make in its current state wich has no actual functionality.
i love that the pins are filament, thank you i was trying to figure out a quick and dirty replacement for metal pins everyone else wants people to buy
I love the way it sounds
The entire reason I’m printing this😅
@@benhemphill8395work ?
Mine ticks twice then just spins. I tried increasing the weight of the wheel but that didn't help. Might be something with the escapement, but I can't figure it out. Any ideas?
Any escapement mechanism that changes orientation continually, such that the balance spring Time period is more reliable
How long should the shafts/pieces of filament be?
You need:
two that are 17mm
one that is 21mm
Thank you so much for sharing us this easy method :)
yooo bro i built this and i made the bearing insert.. i have bearings now i made some bb 3d printed ones.. my bearings and bearing piece is still left over after i finished the build.. did we not use the bearing in this model?? on the video you showed that we will need it then you set it aside and we never seen it again.
Thank you a ton for helping me build this! This is my very first tourbillon build!
that is exceedingly cool
I have recently created a video on flying tourbillion with good quality, check out 😊👍
The pound stretcher movement right there...
its skipping or not starting at all how do i fix this
It doesn’t keep going?
mine is goind double the speed of yours, but why?
Hi where i cant download the plans of this for buldit tks nice work
What material did you use?
thanks for the tutorial
Glad it helped 😊
Respect for this work.
..printed with neptune 4 pro ..nothing fits..0.18 .. printed at 120 mm speed..parts fit 0
My first "real" print with my bambulab A1, took 2.5 hours. And it ticks.
I still can't really believe that 3D printing is real and this cheap.
Hello sir I watched your video and i can say that it really cool and amazing i love this project so much and i want it too ❤but sadly i dont have the printer machine and i saw some websites on Facebook page they have the printer and they can print like this watch but they don't have a file 😢 may i have your 3D file of this watch beacuse i would like to get it so much❤🙏🙏
would it be possible to change the project so that it works without ever stopping?
I believe that doing that would be by somehow adding a battered motor or making the design for the wind-up bigger/more efficient. But otherwise no because that would count as a perpetual motion. And it's almost impossible to make that with the tech we have now.
@@Nordic_Redhead thank you
@@Nordic_Redhead Actually is impossible to create perpetual motion machine as an independent closed loop system without violating the second law of thermodynamics.
How do you keep the mainspring flat when winding up?
Where to get the models of plastic pins?
The pins are 1.75mm filament
Very nice, might i suggest; getting a PEI bed?
I have PEI bed on my Mizar M and Glass bed on my Ender 3 v2. I think glass bed is good option😊👍
Wow! It works!
i got one hahaha get one it is so satisfying
The pins aren't included in the download, what size are they?
use scrap pieces of filament, straightened if possible
Printed it, it works but the rhythm is not steady and it goes only 2 min at max.
What could be the cause of the imbalanced mythic?
someone please tell me how they made the pins
😆Someone: The pins are actually 1.75mm filament
@@3DELWORLD thank you but I just cut paper clips and used them but if I make another one I’ll try that
@@Thatguyfromoverwatch That's cool
@@3DELWORLD I also had it running in the wrong direction so I fixed that and it runs nice and smooth now
@@Thatguyfromoverwatch That's cool... check out my latest video, I have created another flying tourbillion 👍
Hello. Do you use the bearing?: Hola. Usas el rodamiento?
Nope it doesn't require.
How long should the pieces of filament be?
which filament pieces ??
I know you made this comment 8 days ago, but if your still looking for the measurements, 2 should be 17mm and 1 should be 22mm. These sizes worked for me.
What would be really cool is if you could set it to go start and stop at exactly 1 minute intervals, that way it’s a minute timer, so it has a viable function, albeit novelty and also complicated, but let’s face it, nobody’s saying how pointless it is to make in its current state wich has no actual functionality.
How do i buy this?
i can't get the spring off the printer without breaking
if you have glass bed then wait until it cools down to room temperature which should ensure it loses adhesion duo to the plastic shrinking a bit
i got it off with a razor blade and paitents
welp mine def doesn't spin freely like that
🔥💕👌👍
Any hints for printing the spring, Mine's struggling to print
try with 1mm brim it worked for me
print time is not 18 hours for the cr-10 se its more like 4 hours lol
トゥールビヨンというよりカルーセル構造やないか？
It's a Turbillion.
Doesn't Work.
It does work i made mine today 😮
then it’s user error
mine will click like 4 times and then stop
How long should the filament pins be?