Building and Installing a Lift Kit for the Cincinnati Milling Machine
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2023
- The Cincinnati 2ML Horizontal Milling Machine has been a workhorse here at Topper Machine LLC, but it could be much better. A lot of the time, I chose not to use it due to its height. It's just too short for me, and is painful to run.
Hence, the lift kit idea was born. Watch as I build and install this riser base to bring this great machine up to a good working height.
Now that it is more usable, I may make a lot more videos with it.
If you are interested in trying out Anchorlube, here is a link to their amazon store.
www.amazon.com/Anchorlube-All...
Topper Machine LLC is an entirely manual machine shop located in Spooner, WI. Our videos will highlight some of our shop work.
Thank you for watching!
Please Like, Subscribe, & Share.
toppermachine.com
For Official Topper Machine LLC merchandise, check out our Teespring shop.
toppermachinellc.creator-spri...
Support our channel, Paypal donations are greatly appreciated.
www.paypal.com/donate?hosted_...
#machineshop #machinistlife #manualmachinist - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Masters Shanghai Playoffs DAY 4 // 100T vs GEN | G2 vs TH](http://i.ytimg.com/vi/UkTGSxdCUQw/mqdefault.jpg)
You need to put a ( pad ) under the leveling bolts. The vibration will eventually wear into the floor . Very nice fabrication work.
Stay tuned. Can't fit it all in one video.
I was thinking the same thing. Looks like Josh is ahead of us on this one, so we just have to wait for the next video.
@@BrucePierson yes! Yes you do!
I just had to get this part done to get the machine back to work. It has been running everyday since the lift, saving me a ton of time. Just today I made the pads and filmed that. Editing will be next. Looks like 2 weeks out for the next video due to current workload.
maybe if you didn't do it right, the first time, you wouldn't be so busy... Nudge, nudge!
@@TopperMachineLLC
The method you used to lift it was pretty ingenious. Nice job all around, Josh.
Work fascinates me. I can sit and watch other people work all day, Nice job Josh.
Lol. I don't think you're alone on that statement.
1st video for me, subscribed.
I'm 67 years of age, with the patience of a hyper 5-year old, the mind of a teenage boy, and a potty mouth of a Sailor (I was one). In fact, I was living with my family in Prescott when I joined the Navy. Took my GED up there at the University in River Falls. Dad took me to a Shakey's Pizza place over there in Hastings before going to the place in Minneapolis.
I didn't miss the fact that there were at least a couple of Johnson jokes that were hanging there like chads on an election ballot. My late wife used to love those.
No. No she didn't.
Glad you enjoyed it.
My #4 has been sitting on 6x6 wood blocks since I got it. It still works fine despite not being precision leveled.😊
I don't think I have ever seen one person lift a machine as well as that Josh, congratulations on the new working height. Regards Sarah
Thanks. I've had to get creative moving heavy things. Been doing it for most of my life. I have a good friend who does this for a living, and he just watches me in awe. Lol. I've taught him a few things.
Did you put pads under the leveling bolts? Seems like a pretty heavy point load to me.
Stay tuned. Couldn't get everything into one video.
@@TopperMachineLLC On behalf of armchair quarterbacks everywhere, I understand. Great video, as always!
The up/down trick with the knee was super neat. --Doozer
I know that was super slick.
Put a small fixed square or hexagonal bar on the top edge of the fixed jaw of your Johnson bandsaw using two screws. This will allow you to set wide plate at an angle and you will cut through in half the time. Make it a small bar, 3/16 or so, that will catch the edge of the bar stock you want to cut off, but still allow the cutting of small round rod in the traditional manner. You’ll wonder why you didn’t do it sooner.
HELLO SIR IT'S A PLEASURE TO SEE YOU THANKS FOR SHARING
Very nice, professional job. All to often, we just throw something together since it's just for our use. Not the case when someone takes pride in their work. Any work. Regards.
Something I have just added to my workshop is a small low profile magnetic rotor broach drill, drills large holes very quickly and if you take care of the bits they last for a long time as well
I have one, and don't really like it. It gets used for field work, but not in the shop.
Pretty fancy riser blocks. I am surprised that you didn't mill a couple of timbers on your sawmill to make the riser blocks. Great job.
I built it this way for a very specific purpose that will become evident in a future video.
have you tried being shorter?
😂😂😂
I don't think the wife would like that. Lol.
Those legs look great Josh, I was skeptical about the design at first but you proved me wrong. Cheers
There is method in the madness of the design. Stay tuned.
Yes Tom your comment level pads level blocks even raise the machine up a little bit.
Everything I have in my workshop is at "my height"! I added risers to benches, saws and my drill press. I designed my welding cart so i could change the settings without bending down. Really helps with my dodgy back 😃
Hello friend. Keith and my wife really enjoyed your tour and the personal time you spent. We flipped a coin, go via the Michigan route, but we also wanted to see company that has UTV vehicles. Located in the Chicago area. We logged around 1,500 miles.
Glad you enjoyed it. Was very interesting learning about your life experiences.
I have the opposite problem, I'm 5' 4" tall and my Index Mill is too tall! I have to keep a stool handy to tighten the drawbar. If I ever win the lotto I'm going to build a first class shop with my mill sunk 12" into the floor.
One of my customers has a maintenance machine shop. Their machinist is 5'2". They built a raised platform floor around the mill that can be forked away for cleaning. I thought it was ingenious. Would definitely suck for me though.
Commercial laser cutters allow to cut the machine in half and make it so much shorter
platform soles?
Love how you were able to use the machine to pick itself up. I'm 5'13" and my all manual Milrite is really too short for me. I dread the thought of lifting it by myself.
I've been moving machines a long time. I still get nervous. But slow calculated moves, step back and look at it occasionally, extra blocking. Just take your time and be careful.
You may want to have someone double check and assist with, lifting. Heavy machines can be heavy.
(And baker's inches, interesting.)
Get a cople wedges, a 60" bar and buy or make a toe jack,,, With 3 pieces of 2" pipe you can move BIG machines anywhere you want. - If you are just raising the machine get an 8' 4x4 and chop it up into 1 -Ft pieces and with the toe jack yo got it made. - The first thing ANY machine shop with industrial size machines is the 60" bar and toe jack. - You will use them the rest of your life.
Fantastic work! I'm 6'3 and I feel your pain "literally." All of my pre 1980s equipment is just so short. Of all the things I've done raising them up was the best thing I did, second was adding DROs.
Altogether an eye-opening video. So many interesting and novel approaches to solving the problems associated with this build. Thanks for another excellent and entertaining video.
Glad you enjoyed it! Thank you!
Very well designed and built, I would add a plate under the feet to prevent the threaded feet eating into the concrete.
Stay tuned. Can't fit it all in one video.
The way you were running around that machine, I could just here the Benny Hill music.
Lol.
Once again, the hardest working man in Spooner, WI strikes again !
"LIKE" button has been torqued to the manufacturer's recommended specification. "CLICK".
God forbid you should be running around with a loose "LIKE" button and winter's on the horizon
Nice work sir!
That base is beautiful.
Hell yeh quality of life improvements are always good, ive done something similar for my horizontal borer and my lathes. I am 6'5" and they really didnt design these old manuals with tall folks in mind.
I sincerely hope you’re back is feeling better. You are a must watch on my list. Thanks for your hard work.
I should have done this upgrade years ago. Since install, I've used this machine nonstop. It is so much better to run.
Excellent job, Josh. Good design. TOP.
Very cool way to lift the machine, using the knee is a great idea I never thought of. That Anchor Lube is working out a treat. Great work Josh.
So many things to like in this video - hard to pick something specific. Love the way the iron worker shears that plate like it’s not even there though. And also everything else. Saturday morning inspiration.
To the shed!
That ironworker has been a great asset. I almost didn't buy it. Sure glad I did.
a very clever and smart use of wood blocks to get the job done right first time, great vid thanks
Thanks 👍
Genius way to lift that thing up
Thanks.
I have the same machine and I'm relatively short, 5' 8" and it's still uncomfortable to run for very long, setups kill me, this will be on my to do list.
finally... somebody on youtube cleaned the mill scale...
I know, right! Yes, I could burn through it with my welder, but that still isn't correct.
Excellent...I lifted my workbench 5 inches and it made a world of difference.
Your method of lifting that machine is creative. Well done project. Thanks for another interesting video.
Thank you. I moved every machine here by myself. Some I had to get really creative.
Did a similar thing with my mill but i used hefty great timbers
Genius. Like buying a new machine. 👍
You got that right!
Well done Mr.Topper. I raised all of my machines by 125 mm (ca. 5 inches) but chose a different method. I made a separate concrete foundation, that is higher than the shop floor. As it was common here in Germany the machines are bolted to the floor which makes them much more stable. So in my case I put them on long leveling bolts, leveled them and poured the concrete underneath the machines.
Concrete would never work for me. As business shifts, I tend to rearrange the shop to accommodate workflow. Having dedicated slabs would make that impossible.
@@TopperMachineLLC For sure, in that case your method is way better. My workshop is already full, so no further re-arrangement is possible. Enough talking, let's go back making chips! Cheers Sven
I agree with a few others in comments you should put some plates under the machine between the concrete and the screws to spread out the weight hate to see the adjustment bolts dig into the concrete floor great job on the lift platform looks great thanks for sharing
Stay tuned. Can't fit everything into a video.
Nice lift kit . JM
Very nice job Josh. Topper Machine, it's what Saturdays were made for.
You got that right!
It is a joy to watch you work. I am amazed how much i learn from you i am 79 years old and i learned machinist in the US NAVY and have been at it a while. You are never too old to learn THANK YOU FOR ALL YOUR VIDEO'S I keep every one and love too watch them over every once and in awhile.
Jim Stone
I'm glad you can learn from me. I often wonder if I really know what I'm doing. Lol
Had to do the same with my WW2 era 20" lathe. Turning the carriage handwheel, I was having to stoop every turn. Put it up on 6" risers so I don't have to bend over every time!
Andrew
The world isn't designed for us tall folk.
A great project! ANY project tjhat makes a tool easier/safer/faster os a good project!!!
Beautiful tagwelds!
Nice design Josh, turned out great.
ATB......
Great video
☹️🏴🇬🇧
Great job!!!
I'm 6'4" and built risers for my Monarch 16CY. It was definitely one of my best quality of life improvements in the shop.
I built individual stilts for each of the 8 feet using heavy wall 6" pipe and 1/2" player. I thought it was skookum until I saw Josh's version of a riser 😆
Excellent job.
Good job - thanks for sharing
Nice work!!!
Nice shop nice project. Thanks
Good stuff
Great base
Wow, beautiful job!!
Thank you! 😊
That looked like a piece of genius there Josh.
Love all your videos.
Reminds me of working with my Dad.
Thanks, I'm glad you enjoy them and they bring back good memories for you.
great fab job Josh.......cheers from Florida , Paul
Many thanks!
MR TOPPLER PLEASE BE CAREFUL. I ENJOY YOUR VIDEOS AND SEEING CONTENTS LIKE THIS. REAL PEOPLE DOING REAL WORK. I JUST FEAR FOR YOUR SAFETY SOMETIMES IN CASES LIKE THIS I WILL HAVE TO PRAY TO JESUS TO KEEP YOU SAFE. KEEP UP THE GOOD WORKS GOD BLESS BORTHER.
I take more precautions than most anyone else. Having vast experience takes out a lot of the risk, approaching cautiously eliminates it.
@@TopperMachineLLC THANKS FOR DOING SO, STAY SAFE BORTHER KEEP UP THE GOOD CONTENT. AND THANK YOU FOR TAKING TIME TO REPLY TO PEOPLE. SOME OF THE TH-cam "CELEBRITIES" ARE JUST TOO COOL TO EVEN TALK TO PEOPLE ANY MORE.
Nicely done.
Thanks!
Topper Machining presents, Fun with Fulcrums!
LOL. I hope it helps someone out.
Nice work as usual
Thank you, it has helped immensely
I used to have a friend (RIP) who said "Much Gooder" :)
That is common talk in these parts.
That is a really firm foundation, have a great week end.
Josh: 16.00 onwards... Genius power raising move that I would never have thought of. I would still be on the floor, on my knees, and struggling with a crow bar!
You got to get creative sometimes when moving heavy objects.
Great project.. looks good..
Thanks 👍
Most old iron machines were designed around someone that is between 5'9" and 5'11". I'm 6'3" so I have risers made of 4" heavy wall square tube on my bridgeport and my Leblonde lathe and my back thanks me every day. I bolt the risers down and level the machine to them as I would if bolting them to the floor.
Elegant riser brackets Josh, look 👍 great. Maybe attracting some 4x4 guys, ref "Lift Kit" 😂.
Nicely done on machine lifting, good to see some using their brain.
Thanks for sharing, and goodbye back pain.
You have an awesome work ethic. And a very well equipped shop. Just found your channel and subscribed. Thank you.
Thank you, and welcome to the channel.
That’s a nice job.
Thank you.
Kool nice job Enjoy
Excellent fabrication design. Using the powered knee and wooden blocks, great idea. I've just lowered my mill using wooden blocks in a similar way. Enjoyed watching your process.......Tony
I'm glad that worked out for you. Thanks for showing us how you did it.
I should have done this years ago.
Great idea raising the machine. Realty liked what you made to set it on, don’t think the machine is going any place. You did a very nice job of editing. First time seeing a sheer like what you uses to cut the gussets, that’s a powerful little devel. Thanks for taking the time to show us how you did it. From the “show. Me state” Missouri.
Absolutely beautiful base. Better than factory! And your genius method for lifting the mill off the ground! Man I was waiting for a crane to show up. I would never have thought of using the powered knee as a huge upside down bottle jack to do all the heavy lifting. AMAZING! Thanks so much for sharing all your "how to" with us!
I enjoyed your innovative elevation method, all in all, a job well done. 👍
Thanks, it worked out great.
Josh that’s a robust riser!
Thanks. I like overkill. And it serves another purpose.
Love the use of blocks and levers; as a farmer, I really appreciate moving things that are far too heavy by myself 😂
Josh you are slick especially how you raised the machine nicely done
Thanks. I moved every one of these machines by myself. I had to get creative on some of them.
Real nice quality of life upgrade for you and I for one appreciate the paint.
Thanks 👍
Nice work on the lift kit. It turned out great and it will make the machine a lot easier to use. Very clever using the machine to lift itself.
Thanks 👍
Necessity may be the Mother of Invention, -- But JOSH is Definitely the DADDY !! LOL
Thanks! Just doing what I need to keep making chips.
Great jop!!!
Those leveling bolts should be sitting on a steel pads, not directly on the concrete.
Stay tuned. Can't fit everything into a video.
Nice solution to your height problem. Thanks to your idea I may build a new riser for my 15" x 40" lathe. I installed it on 1.5" tall blocks but could double that and still be comfortable.
Well color me awed. Raising that machine up was quite impressive. Project came out beautiful.
Glad you liked it!
I have a Van Norman No2 medium similar size but not as short as that. When I got it 30 years ago I went to a saw mill and had them cut me 10x10" oak blocks, enough to go all under the machine base, probably 7 blocks total. Much nicer at the taller height.
Top job there Topper sorry had to love the feet you made way over engendered as you say but some times one has to use what one has laying around this has given me inspiration to do some thing to lift my mill up some Cheers
I didn't use what was laying around. I ordered this steel in, just for this project.
This was fantastic to follow and the lift brackets turned out great. You have got us thinking about the height of our machines
They are all too short. Even my biggest machines could use some height.
Great video Josh, my Sebastián lathe needs the same treatment, I'm 6'3" needs around 4"lift, your mill is good and solid, excellent job.
hello josh it's is randy and i like yours video is cool thanks josh friends randy and i am enjoy yours video is super thanks josh friends randy
Great job, why don’t you drop ship machine products you know are good. Anchor Lube for example. U don’t need stock the wholesaler will despatch and deliver.
Nice work. I dont have nice big machines like you have, mine are all bench mount - so all my benches are different heights to suit the operation of the machine, it makes a big difference when you are standing there for hours!
Josh, that was awesome. What a perfect machining job. The extensions look great and very functional. I was concerned about the adjustable feet not having a flat piece of steal under them, but it worked out great. Excellent video as usual. Thanks. Ken
Feet are coming! Stay Tuned!
Good morning!!! You are always interesting to watch. The lift kit turned out great. Not only is the machine higher but now the base has a little bigger foot print. I can not believe you were able to shear steel that thick. I guess I do know the strength of your machines. When you spend so much time in your shop it sure helps to have your machines at a good working height. I am glad that I was able to meet you. I sure wish that I had your skills. It was great to meet Rocky.
Thanks Alan. It was nice meeting you as well. Even though briefly.
@@TopperMachineLLC I did make it up to Superior a few days later. Once more thing off my bucket list.
Agreed on the welding prep work. But try 10% skill level in TIG welding........
Oh I know. I used to TIG a lot, but got out of it for about 10 years. I bought the Primeweld machine to do a project because it was cheaper to buy the welder than have it done. After about a year of practice, I am finally approaching half the level of quality I used to have.
Anchorlube approves.
Very enjoyable video, my new favorite channel and I watch all the usual suspects from Mr Pete to Abom, keith Rucker, Keith Fenner, etc
Thank you for sharing your knowledge and experience
Thanks for your support.