The trailing truck of the loco is hung up and not touching the track. The axle is not rotating. Now, just to show my age, the protective bracing is shoved under the 'smoke box'. The boiler in over the fire box. I do enjoy your reviews none the less, I was just born during the age of steam.
Just an FYI if you press F9 on your controller it initiates the startup sequence for all BLI engines. When running if you press F9 again it initiates a shutdown sequence. Other than that it was an awesome review. I know BLI has some PRR Lite Mikes so I am now going to go get one for my roster. Thank you for another excellent review sir. :)
I've been out of buying model trains for some time, but for when I do get back into buying new models, I'm going to go for a CNR version of this locomotive. Great review by the way.
I had to go back downstairs to check. I couldn't tell from my height and distance from the loco. The trucks just needed to be tugged on a little and now make contact with the rails. Thanks for the catch.
Great review James! BLI does have some good stuff. On the unboxing, I like them but the fast forward does save some time for stuff to be explained. Also, send me your address and I will send you a pointer that you might find harder to lose. LOL. Really, I will. Cheers, Dan
Nice review just got the PRR version. I noticed the whistle volume is pretty low even on mine and even after adjusting it is still to low compared to both the bell and chuff if I try to keep the volumes in line with other locos on my layout. Dont know why but cant get a decent volume out of the whistle.
I hope the re release of 4501 in Paragon 3 has the whistle this engine blows. And the same bell. Yea what a bummer they could fit the smoke in the Paragon 3 engines. There's no smoke on Paragon 3 2-8-2 Mikados and 4-6-2 Pacific.
The Traction / Pulling Power of this loco, like most BLi locos is artificially high, due to it's traction tyre. So you can never have prototypical running; i.e. wheel slip. Shame I'm not into model trucks with their big rubber tyres. ;)
I don't understand how BLI can fit a smoke unit in a Consolidation but not a Mikado. Sorry, I'm not buying it. Nice model otherwise. BLI needs to upgrade their sounds. They have fallen behind. I would put MTH, ESU, TCS, and SoundTraxx all ahead of BLI in the sound department. I wish BLI would just partner with one of the leaders so we could get the best sound and smoke in the same model.
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
I enjoy these reviews, but the only thing I would like to see that's not already shown is a demonstration of pulling with a short consist.
The trailing truck of the loco is hung up and not touching the track. The axle is not rotating. Now, just to show my age, the protective bracing is shoved under the 'smoke box'. The boiler in over the fire box. I do enjoy your reviews none the less, I was just born during the age of steam.
I like the unboxing - keeps the manufacturers honest on packing, parts, instructs, quality control, etc.
Just an FYI if you press F9 on your controller it initiates the startup sequence for all BLI engines. When running if you press F9 again it initiates a shutdown sequence. Other than that it was an awesome review. I know BLI has some PRR Lite Mikes so I am now going to go get one for my roster. Thank you for another excellent review sir. :)
I've been out of buying model trains for some time, but for when I do get back into buying new models, I'm going to go for a CNR version of this locomotive. Great review by the way.
Why was the rear truck not resting on the rails?
I had to go back downstairs to check. I couldn't tell from my height and distance from the loco. The trucks just needed to be tugged on a little and now make contact with the rails. Thanks for the catch.
I wanted to see it pull it's share of rolling stock.
Great review James! BLI does have some good stuff. On the unboxing, I like them but the fast forward does save some time for stuff to be explained. Also, send me your address and I will send you a pointer that you might find harder to lose. LOL. Really, I will. Cheers, Dan
Keep the unboxing James. Love the details you put into the reviews.
Nice review just got the PRR version. I noticed the whistle volume is pretty low even on mine and even after adjusting it is still to low compared to both the bell and chuff if I try to keep the volumes in line with other locos on my layout. Dont know why but cant get a decent volume out of the whistle.
vey nice engine
Great review James! Thanks for all you do!
I got a Athearn 2-8-2 HO Scale for $150 DCC ready in Minneapolis MN..... How much do these go for on average?
I hope the re release of 4501 in Paragon 3 has the whistle this engine blows. And the same bell. Yea what a bummer they could fit the smoke in the Paragon 3 engines. There's no smoke on Paragon 3 2-8-2 Mikados and 4-6-2 Pacific.
What is the minimum turn radius and how picky is she on turnouts? I have a mikado from MTH and it's very finicky
Why aren't the rear trucks touching the tracks
Could you possibly review the athearn genesis sd 70 standard cab ns
Have u checked out the BLI Paragon 3 PRR J1?
Nice review
The Traction / Pulling Power of this loco, like most BLi locos is artificially high, due to it's traction tyre. So you can never have prototypical running; i.e. wheel slip. Shame I'm not into model trucks with their big rubber tyres. ;)
Good looking locomotive. Too bad it's not available without the noisemaker.
pdbnc brah just press f8
I don't understand how BLI can fit a smoke unit in a Consolidation but not a Mikado. Sorry, I'm not buying it. Nice model otherwise. BLI needs to upgrade their sounds. They have fallen behind. I would put MTH, ESU, TCS, and SoundTraxx all ahead of BLI in the sound department. I wish BLI would just partner with one of the leaders so we could get the best sound and smoke in the same model.
I have one of these but it’s a great northern version. Anyone know how old it is? I found it at a train show for $160. Runs great