Intex pool filter pump fix!!

Pump not working? Not spinning? Not spitting any water out? Humming..? Tried changing the filter..? Tried cleaning and drying everything..? Try this before searching/buying a new pump. Very easy fix.. tape only required!! Hope this helps someone!! And please let me know if it does!! Thanks guys! 😊

[@meanderingmyrrkat8798]

The part you cleaned and taped is called a magnetic impeller...these pumps are built same principle as aquarium pumps ie a bio-wheel system...Intex has no info on this but you will find it on aquarium pages...thank for your video, you were spot on 👍👍👍

[@madison2311_]

Mine was the shaft or ceramic pin it broke. I got a metal shower curtain hook and bent it straight and cut to size .works great

[@deborahhuff4197]

I will definitely try this today. Hoping I can get this pump working.. Thank you for this video..

[@bartart5147]

thanks! this helps a lot. but in my case, it was not the impeller. instead, it was the middle shaft that was broke. it was made of plastic. I would just order a replacement made with steel. but it would take too much time. so I just cut a plastic rod with a same size to a same length and replaced it. now it works well. untill it breaks again. I might as well order the steel rod in the mean time.

[@matthewdaniel15]

You rock! I tried everything too and this got it working again. Thank you!

[@shadwell749]

I like women like you.You may not know what the parts are but you sure get things done.

[@leetotty7703]

The problem with these cheap pumps, is the impellers center shaft is plastic, and breaks. I put a steel shaft in mine and have not had any more issues. If the shaft breaks, the magnetic center gets lodged, and will not spin.

[@eddiemx]

Gracias desde México, I must say you saved me, Thanks! its working again

[@allcommrs]

From Brazil. Perfect 👍

[@gentederadio1411]

La parte que parece desgastada no lo esta. Es asi de fabrica. Puede ser que tu bomba se quedo trabada con algun desgaste que no era necesariamente esa parte que rellenaste con teflon y tape

[@tadessemamo6018]

It’s helpful, mine work too.

[@sporktek]

Heat shrink tubing might work better than electrical tape at the end, it won't unwrap if the edge gets caught.

[@memyselfandi3242]

Especially if it is wrapped against the spin direction!

[@joelojeda3370]

Thanks great ❤

[@happyglock3426]

You rock

[@gotyesomeonyouusetoknow]

Thanks

[@claudineiaaparecidadegodoi5223]

Oi tem como ser em português
O meu filtro só está com barulhinho e jogou só um pouquinho e já parou

[@luismacarandan5545]

Is it 530 gal/hr?

[@alikanpayares2145]

Trata de hacer el audio en español para los latinos por favor