Kickback Isolated Risers

The Kickback moves the bars 1.5" towards the rider. Our Kickback Isolated Riser utilizes the exact same technology as our Isolated Riser, the only difference is that the Kickback offers a one-piece kickback center section that pulls the handlebar back 1.5" toward the rider. Like the Isolated Riser, the legs are solid-mounted to the top triple tree with our supplied billet bushings and the rubber isolators have been relocated inside our billet midsection just below the bar clamp. The result is increased rider comfort and superior performance due to the more rigid, responsive setup. The proprietary use of these rubber isolators also reduces handlebar vibration and play due to less leverage being placed on the bushings.
For more information visit: www.krausmotor...

[@bradleyrayfield2951]

May pick some of these up, nerve problems have my hands asleep after 5 minutes

[@balidwipasuperredarwana7166]

Can it install for m8 fatbob?

[@badhonky6473]

Made in usa?

[@cjsmith]

Yes 😎⚡️🤙

[@gregbabcock9396]

Do these risers work with the top clamp digital speedo on the 2019 street bob?

[@UmmBruuh88]

no but they make a mount for it.

[@just_ride940]

can i still use my forks lock?

[@porkburrito]

Yes

[@skipper1206]

NOT EASY TO SWAP!!! Once they are mounted you can’t get them off!!!!
No way to hold the riser while turning the bolt under triple tree, even tried a rubber strap wrench and that didn’t work. Mechanic here and these are a pain in the ass, can’t get em off the bike.
And if there is a trick to it, Krause ain’t telling us because there is no instructions with the parts, online or videos.
If they put a small square area (like on shocks) at the bottom of the risers you could remove them, but nope, they might as well be welded on

[@michaelenglish7213]

Any Luck? Just ordered taller ones and have been looking for videos on how to swap them out.