Oh my gosh this was my exact problem... after trying to fix it for over an hour. AGHHH something the solution is so simple we forgot to check everything. Thank you so much! I had no idea brushless motors stuttered when only two leads had connection. Thank you so much!
Thank you. I'm a beginner and could not get people to even understand what my problem was and I happened on your video and you solve it in 2 minutes. Thanks again.
Thank you I've been trying to diagnose my crawler that uses a drone motor. Everyone so far has said my motor is fried. This video proves that it's a connection issue. Thank you sir
This is so simple and effective - I worked out very easily which of my motor wires is actually faulty. You saved me from scrapping a good EDF unit. Excellent
What an absolute great share,, been stumped with this issue on my Traxxas X-Max,, wow,, I’ve exhausted and even doubted my 20+ years loving RC’s,, bad connection, loose solder joint on my Bullet Connection,,, thank you good Sir,,😎✌️
Thanks a million pal! Story of my life any problems l have ever had with RC stuff and the electrics in my car have always been down to a “bad connection “ . Should always check this first , my old esc is now sorted thanks to you l was just going to start messing with the timing !!! Thanks a million.👍
Cheers pal. This is probably the only thing left I haven't tried lol when it takes off I have issues breaking also. I wonder if this is why. Well maybe , hopefully.. cos everything on my new build is new. Brand new. Hobbywing esc and the full monty. So I'm gonna take a look inside the heat shrink..
great video glad I saw it , cause have same problem with my violamart hub, (ebike motor hub not rc )..I assume that maybe it was my controller when I solder the shunt to give it more power, but hope that will be the problem , in the future I will upgrade for a better controller
hmmm I have what looks like this problem but checking continuity from the wires from the motor to the esc connection point seems to be all clear for all three wires, can it still be this issue and I am using the multimeter wrong?
Any fix mine launches full throttle then slows down and then stops. Befote it slows down it sounds like a glass filiing wxcept in motor noise like u know when u speed up, that sound come and my motor dies
Please help me my brushless goolrc motor is beeping and won’t move I went in a small water puddle does the beeping mean the I have to have a program card because I have a program card comeing in the mail soon and my motor shaft is twitching when I move it
Did you find the problem? I have the exact same problem when I hold my rc car it spins no problem but soon as I put it down on the floor it's stutters and I can solve the issue. Thank you in advance
@@preeshenmoonsamy9017 I took mine to an rc shop and they said its either motor or esc but its cheaper to change both together so that's the route I took tbh hope that helps
Oh my gosh this was my exact problem... after trying to fix it for over an hour. AGHHH something the solution is so simple we forgot to check everything. Thank you so much! I had no idea brushless motors stuttered when only two leads had connection. Thank you so much!
Mine launches full throttle then slowly goes slow and then stops
Thank you. I'm a beginner and could not get people to even understand what my problem was and I happened on your video and you solve it in 2 minutes. Thanks again.
Thank you
I've been trying to diagnose my crawler that uses a drone motor. Everyone so far has said my motor is fried. This video proves that it's a connection issue. Thank you sir
This is so simple and effective - I worked out very easily which of my motor wires is actually faulty. You saved me from scrapping a good EDF unit. Excellent
What an absolute great share,, been stumped with this issue on my Traxxas X-Max,, wow,, I’ve exhausted and even doubted my 20+ years loving RC’s,, bad connection, loose solder joint on my Bullet Connection,,, thank you good Sir,,😎✌️
Just what I needed! Thanks! Thought I had to buy a new motor, you saved me.
Excellent video - straight to the point - thank u.
Thanks. Checking into it a bit more tonight 🤙🏻
This is the exact thing that’s happening to my rc car THANK YOU SO MUCH 😊
Thanks a million pal! Story of my life any problems l have ever had with RC stuff and the electrics in my car have always been down to a “bad connection “ . Should always check this first , my old esc is now sorted thanks to you l was just going to start messing with the timing !!!
Thanks a million.👍
Cheers pal. This is probably the only thing left I haven't tried lol when it takes off I have issues breaking also. I wonder if this is why. Well maybe , hopefully.. cos everything on my new build is new. Brand new. Hobbywing esc and the full monty. So I'm gonna take a look inside the heat shrink..
great video glad I saw it , cause have same problem with my violamart hub, (ebike motor hub not rc )..I assume that maybe it was my controller when I solder the shunt to give it more power, but hope that will be the problem , in the future I will upgrade for a better controller
Your awesome thank you
Thanxs for the idea. Fixed my problem
Nice pf👌
It's not nice it's the same one he has 😐😒
@@engineeringaspirantunoffic2856 realy? Haven't seen that yet 🤦🙃
Thanks for the info fixed my issue!!
I have similar issue but motor works ok from off to middle throttle. But when reaching middle throttle and up it starts doing the stutter. Any ideas?
Possible the esc has failed
@@vipertech9108 thank you!
Thanks this video help to solve my problem
thanks, it worked
hmmm I have what looks like this problem but checking continuity from the wires from the motor to the esc connection point seems to be all clear for all three wires, can it still be this issue and I am using the multimeter wrong?
My motor, a micro 0802 stutters and heats up instantly. Any idea what this could be?
i have the same problem, a very new ESC and its just stuttering. I dont know what to do, should i buy a whole new ESC?
Thanks you
Any fix mine launches full throttle then slows down and then stops. Befote it slows down it sounds like a glass filiing wxcept in motor noise like u know when u speed up, that sound come and my motor dies
The problem with mine is that it’s stiff even if I don’t connect to ESC ITS STILL STIFF
Please help me my brushless goolrc motor is beeping and won’t move I went in a small water puddle does the beeping mean the I have to have a program card because I have a program card comeing in the mail soon and my motor shaft is twitching when I move it
Check for broken wire if no broken wires sounds like may need programed or the esc is burnt out.
I have the same problem
My gool escort motor combo stutters when I put redcat volcano on the ground but if I hold it an squeeze the throttle it excelerates right away
Sorry I meant my gool esc
Nice
Ok but what is the fix to this problem 🤣
As I said in the video the problem is a broken connection in one of the wires. The fix is to find the connection issue and repair
Thanks for that i had a broken wire and soldered it straight to the esc was going to buy yet another motor and esc !!
I have a1/6 herbie and it stutters when it drives under its load because I lift it and it turns fast no problems smh idk what’s wrong with it
Did you find the problem? I have the exact same problem when I hold my rc car it spins no problem but soon as I put it down on the floor it's stutters and I can solve the issue. Thank you in advance
Dis url find the problem mine too does the same
@@preeshenmoonsamy9017 I took mine to an rc shop and they said its either motor or esc but its cheaper to change both together so that's the route I took tbh hope that helps
@@preeshenmoonsamy9017 get a new battery the green lithium ones and if u get the 12v battery it runs faster