Hi man please help me in. This matter when i give more throttle my motor stop's what does it mean i have 120A of eater cooler esc and motor with it so what happen is when i give more throttle. Motor stops may be due to the weight of my boat? I made hull myself please tell me how to solve this matter i have 5000mah 6cell lipo with it. But still it stops how can i solve this matter.
My slash vxl 2wd brushless is doing this even tested it with the remote and it accelerates on it's own and when applying throttle I get the stuttering when driving on road and offroad. And I bought a new battery for nothing to test in cause was my Amazon batteries but its not. I'm thinking it's the esc or the wires to the motor being frayed exposed wires on the connectors. But I ended up wrapping the wires with electrical tape.
Sometimes when they saurter the wires to the esc they don’t always get a good connection most of the time they will depending on brand but if you think that’s the problem I would redo them. Take them out and resaurter if don’t fix the problem then yes it’s the esc as far as the motor having exposed wires that will not cause the problem your having.
@@steveandries I noticed when I steered the wheels the rear wheels stutter forward and times I drove my slash around it sounds like it's shifting gears when I accelerate it.
@@gamercat7004 that sounds more like the motor is bad and as far as the rear wheels moving forward when you turn left or right you probably need to readjust your settings
@@steveandries yea I did the endpoint factory reset on it and tested it out and drove it on the street it's not doing it no more. But I still need more testing and I did open up the motor and cleaned it up and checked the magnet inside. It still good no cracks on it. If the problem still exists I would go with traxxas support.
Hi man I have a quicrun 120A esc ive been told it may be on Lipo mode hence the cutting out ( A proffesional solderer soldered the wires on) If not can the sensor wire be the issue? Ive tried it without the sensor wire and it does the same thing...
It could be on Lopo mode but if not then it could be one of two things 1 resolder the wires just because he was a pro doesn’t mean it’s getting good connection I would have it resoldered if it still does it it’s a good chance it could be the esc
@@steveandries I have Lipo coming so if they work then yes it will be lipo. I do realise but my uncle soldered it and he mulitimetered it so it is getting connection.
I have an rc car it has 2 speeds normal and slow. On normal, it doesn’t go as fast as it should On slow, when you make it drive, it stops about 5 seconds later until I pull the trigger again. I was wondering if you would have an idea of whats wrong. I also noticed that the blue light on my esc flashes when the car stops on slow mode. But I don’t know if its the esc because it looks fine. (It hasn’t always been like this)
Hi thanks for asking if the esc is a traxxas valerian than it most likely is the esc they were made cheaply and have problems in my experience if you have another one laying around try it if no problems then you will know
@@steveandries My rc car is not an expensive rc car, its the haiboxing hailstorm. I don’t know much about rc cars, it’s my first fast rc car and I am currently charging my battery but when I used it earlier today, it was not staying one speed when I held down the trigger. It was kinda like pulsing. Like something was uneven but the wheels looked fine.
Hey Mr Steve I'm having a hard time with a touring car 10th ....and esc is a 80a s-brushless .all connections are good motor is a 3650 3800kv (550size). And when I hold her in the air all powered up and free she goes crawl.slow.fast.stop.rev.....but when I put the wheels to the floor....😒 A hole different story....😩😕help asap if ur still online
@@benw3830 thanks really...I've eventually got her right thanks...ran very very well ...I got too happy and blasted her 😓now she's gone "OB4 INTERNATIONAL ELECTRIC"....😥 TOTAL CARNEAG
Thank you! I just built my rc touring car and I had the same problem. Best organized video on youtube!
Exactly what mine is doing. This is the best video on TH-cam. Thanks man
One of the best info post on you tube .. keep it up Kansas City is watching
Thanks Steve
Hi man please help me in. This matter when i give more throttle my motor stop's what does it mean i have 120A of eater cooler esc and motor with it so what happen is when i give more throttle.
Motor stops may be due to the weight of my boat? I made hull myself please tell me how to solve this matter i have 5000mah 6cell lipo with it. But still it stops how can i solve this matter.
Hey Mr Steve I have a problem with a. Sandy land 1/18 380 motor keeps happening can you show me or tell me how it’s able to fix?
Tell what’s happening and send a short video and I can help
Ok nice i will try this too. My savage flux does this and its frustrating me to no end
My slash vxl 2wd brushless is doing this even tested it with the remote and it accelerates on it's own and when applying throttle I get the stuttering when driving on road and offroad. And I bought a new battery for nothing to test in cause was my Amazon batteries but its not. I'm thinking it's the esc or the wires to the motor being frayed exposed wires on the connectors. But I ended up wrapping the wires with electrical tape.
Sometimes when they saurter the wires to the esc they don’t always get a good connection most of the time they will depending on brand but if you think that’s the problem I would redo them. Take them out and resaurter if don’t fix the problem then yes it’s the esc as far as the motor having exposed wires that will not cause the problem your having.
@@steveandries I noticed when I steered the wheels the rear wheels stutter forward and times I drove my slash around it sounds like it's shifting gears when I accelerate it.
@@gamercat7004 that sounds more like the motor is bad and as far as the rear wheels moving forward when you turn left or right you probably need to readjust your settings
@@steveandries yea I did the endpoint factory reset on it and tested it out and drove it on the street it's not doing it no more. But I still need more testing and I did open up the motor and cleaned it up and checked the magnet inside. It still good no cracks on it. If the problem still exists I would go with traxxas support.
Hi man I have a quicrun 120A esc ive been told it may be on Lipo mode hence the cutting out ( A proffesional solderer soldered the wires on) If not can the sensor wire be the issue? Ive tried it without the sensor wire and it does the same thing...
It could be on Lopo mode but if not then it could be one of two things 1 resolder the wires just because he was a pro doesn’t mean it’s getting good connection I would have it resoldered if it still does it it’s a good chance it could be the esc
@@steveandries I have Lipo coming so if they work then yes it will be lipo. I do realise but my uncle soldered it and he mulitimetered it so it is getting connection.
I have an rc car it has 2 speeds normal and slow.
On normal, it doesn’t go as fast as it should
On slow, when you make it drive, it stops about 5 seconds later until I pull the trigger again.
I was wondering if you would have an idea of whats wrong.
I also noticed that the blue light on my esc flashes when the car stops on slow mode.
But I don’t know if its the esc because it looks fine.
(It hasn’t always been like this)
Hi thanks for asking if the esc is a traxxas valerian than it most likely is the esc they were made cheaply and have problems in my experience if you have another one laying around try it if no problems then you will know
Is a vlc esc if so it’s the esc
@@steveandries thx for letting me know!
@@steveandries My rc car is not an expensive rc car, its the haiboxing hailstorm. I don’t know much about rc cars, it’s my first fast rc car and I am currently charging my battery but when I used it earlier today, it was not staying one speed when I held down the trigger.
It was kinda like pulsing. Like something was uneven but the wheels looked fine.
Hey Mr Steve I'm having a hard time with a touring car 10th ....and esc is a 80a s-brushless .all connections are good motor is a 3650 3800kv (550size). And when I hold her in the air all powered up and free she goes crawl.slow.fast.stop.rev.....but when I put the wheels to the floor....😒 A hole different story....😩😕help asap if ur still online
Shawn you may need to titan the slipper clutch a little at a time like a half a turn
@@benw3830 thanks really...I've eventually got her right thanks...ran very very well ...I got too happy and blasted her 😓now she's gone "OB4 INTERNATIONAL ELECTRIC"....😥 TOTAL CARNEAG
I have this issue. Works in the air but stutters on ground. What was your fix?
Shawn Thompson sorry I have any clue sounds like it mite have something to do with the receiver though
Emjay did you figure this out? Having this problem currently. I’m assuming it’s a broken brushless motor
Or soon to be broken, going out
T