My buddy did something similar, pulled his door panels off and took his old Hot Rod and Car Craft magazine covers and covered over them. Lots of cool graphics and bright colors on the magazine covers... It looked fantastic!
Hey Tony! Man, that is a great idea! Never seen this done before on a Hot Rod. I think it would look great in Old Crow, just not overdone. Mayne on the door panels, inside of the roof too. Definately be one of a kind for sure! Love the door handle idea. Use whatcha' got, not jus buyin' somethin' new.10 seconds aftet you uploaded. I see Hardcore Fab drop, everything get sidelined!
Hey, Nice idea for the inside of the car. But I saw a guy do the same thing, except it was to the outside of his car. It's been awhile since I seen it, but I think he lived up in Milwaukee, WI, I think. He used some kind of clear, where it sealed collage against rain. But no car washes for him, but when it did get dusty or dirty he would take a hose, disk soap, and cloths to wet it down and lightly hand wash it. One comment about your door panels: What happens when you need to fix the door hardware? I think you should have attached the panels so that they could be removed. Good video with some really good ideas. Keep up the good work. Bart
Great question! The door panels have about 5 tack welds on each side so with the death wheel it can be off in a couple of minutes. There is only a latch in there no lock or window regulator to have to service so not likely to be back in there any time soon.
I seen a Carson top done like that but on the inside of the roof he used hot rod magazine's to cover the inside of the top it was cool, it had me looking at the inside for a while looking....
Way back in the day. My dad would take a picture out of a magazine. Put 6 coats of candy apple clear lacquer. On pic leave dry. Put in warm ivory dish water. Slide pictures right of the page.
Wanted to do the inside of a camper like this. Young kids do there wheels this way. Can buy it on Ebay. But looks good in your girls car. Not old crow. Might as well paint the interior pink. Simples good. It's a rat rod. Now hand painted stickers would be good. Air brush even better. But no decoupage . Have you thought of Dazzle camo painted interior.
I was at a flea market and there was some old door nobs I picked one up and someone else picked the other door nobs up, he wasn't setting it back down and I wasn't setting mine back down. I paid for it I ended up making it into a suicide nob for a steering wheel.
All in all, not bad! I've had to touch up the Mod Podge in a couple of places I didn't get in on thick enough. I think it could use a good clear coat to seal it all on more permanently....one of these days.....
They sell that clear spray on plastic coating now that it can get wet and nothing will happen. I don't know how it will hold up to heat and sun light over the year's?
I have a huge piece of card board I glued all kinds of different car's truck's out of old Hot Rod magazine's I have and on the other side older picture's of woman so I can hang it on both side turn it over to change side's when I get tired of looking at one side.
thanks to your wife's brilliant idea and your epic fabrication skills, one of the coolest looking door panels on the planet. you guys are awesome. love the channel! ps: please toss that hideous air cleaner. k, thanks :)
Very Creative ,nice job with the Bead Roller . Thanks for posting it !
Like the bead rolled panels. That's s good way of displaying old car advertising, everyone gets to see them!
That's a great idea! I've seen similar to it under hoods. Memorabilia. I like it
Glad you like it!
Very unique idea! Lookin great!!!
That’s cool. Props to the wife.
Now that's different and looks cool y'all keep up the good work and stay safe stay healthy stay busy
Thanks!
Such a creative duo
THAT IS COOL IDEA, those ads 🤣,GREAT JOB On the door panels 👍🏻
Yea its pretty crazy seeing how things were advertised years and years ago. Also pretty crazy how much things have changed since those times as well.
That is so cool great idea
My buddy did something similar, pulled his door panels off and took his old Hot Rod and Car Craft magazine covers and covered over them. Lots of cool graphics and bright colors on the magazine covers... It looked fantastic!
That's a great idea!
That's an awesome idea. Looks cool
That is a very sweet idea , I love the work you put into them clippings. 🔥💯💪🏼👍👍🙏🙏
Her car, she gets to do what she wants.
Very cool 😎 love the quilting patina 👍
Very cool !!!!!!!!!! 👍👍👍👍👍
That’s awesome, there is a local rat rod here that used old auto show and drag race fliers similar to that but not as cool as the ads.
Cheap, quick and creative
Hey Tony! Man, that is a great idea! Never seen this done before on a Hot Rod. I think it would look great in Old Crow, just not overdone. Mayne on the door panels, inside of the roof too. Definately be one of a kind for sure! Love the door handle idea. Use whatcha' got, not jus buyin' somethin' new.10 seconds aftet you uploaded. I see Hardcore Fab drop, everything get sidelined!
I know you do. I can't say thank you enough!
Hey !
Way Cool Original idea !
That is a good lookin roadster !
Be Safe and Well
Put some rocks in ya pockets to stay in place in todays wind !
BOY!!!
Hey,
Nice idea for the inside of the car. But I saw a guy do the same thing, except it was to the outside of his car. It's been awhile since I seen it, but I think he lived up in Milwaukee, WI, I think. He used some kind of clear, where it sealed collage against rain. But no car washes for him, but when it did get dusty or dirty he would take a hose, disk soap, and cloths to wet it down and lightly hand wash it. One comment about your door panels: What happens when you need to fix the door hardware? I think you should have attached the panels so that they could be removed. Good video with some really good ideas. Keep up the good work.
Bart
Great question! The door panels have about 5 tack welds on each side so with the death wheel it can be off in a couple of minutes. There is only a latch in there no lock or window regulator to have to service so not likely to be back in there any time soon.
I seen a Carson top done like that but on the inside of the roof he used hot rod magazine's to cover the inside of the top it was cool, it had me looking at the inside for a while looking....
Looks pretty cool❗👍
You could cover it in a clear epoxy to protect it too. But that’s pretty badass!
Love this stuff man keep it coming
She did a great job on that for sure
A Totally Awesome idea
Glad you like it!
Nice job cool stuff looking good
Awesome vid man good to see ur chanel growing 👌
Thanks I appreciate it
Awesome 👍
Way back in the day. My dad would take a picture out of a magazine. Put 6 coats of candy apple clear lacquer. On pic leave dry. Put in warm ivory dish water. Slide pictures right of the page.
The first hydro dipping👍👍👍
Wanted to do the inside of a camper like this. Young kids do there wheels this way. Can buy it on Ebay. But looks good in your girls car. Not old crow. Might as well paint the interior pink. Simples good. It's a rat rod. Now hand painted stickers would be good. Air brush even better. But no decoupage . Have you thought of Dazzle camo painted interior.
That would make me sick. LOL
I was at a flea market and there was some old door nobs I picked one up and someone else picked the other door nobs up, he wasn't setting it back down and I wasn't setting mine back down. I paid for it I ended up making it into a suicide nob for a steering wheel.
LOL
That's awesome
I love it
LOVE IT !!! @ ... .. . LOOKS GR88T !!! ... .. . HAD A SHOW MOTORCYCLE WITH A WIFE ON IT !!! @ ... .. . KEEP IT UP !!! ... .. .GR88T STUFF
That's a good idea. Never thought of doing something like that. You could make a rap like that.
Could totally do a rap like that but this adds some texture that I dig!
I do wood carving I bet that would look really cool if I done that in wood and made it look like leather like that
That could be really cool! I would love to see it if you decide to do it!
Jake of Pete and Jake fame did a tourer in the 80's with a similar effect and I thought it looked pretty cool
How is it holding up?
All in all, not bad! I've had to touch up the Mod Podge in a couple of places I didn't get in on thick enough. I think it could use a good clear coat to seal it all on more permanently....one of these days.....
@@ThatRustLife thanks for the videos
Use vintage auto stickers and decals
awesome
You cand do what shes doing in the car out side just clear coat coat it after its all put on
decoupaging the hump sounds like something I saw in another video on the internet.............
I started to say something in the video but I was good!
Clever
go to your local hardware store and get some polyurethane to put over the floor that.ll make it durable
They sell that clear spray on plastic coating now that it can get wet and nothing will happen. I don't know how it will hold up to heat and sun light over the year's?
I have a huge piece of card board I glued all kinds of different car's truck's out of old Hot Rod magazine's I have and on the other side older picture's of woman so I can hang it on both side turn it over to change side's when I get tired of looking at one side.
I Did my rat rod with old newspaper a long time ago. Sorry haha
Well you should have put it on TH-cam LOL
It would work if you clear coat it
Put clear coat over it
I did
thanks to your wife's brilliant idea and your epic fabrication skills, one of the coolest looking door panels on the planet. you guys are awesome. love the channel!
ps: please toss that hideous air cleaner. k, thanks :)
clear corht vill do the job a last longer
Clear coat it