Jose just sold his Spoon front bumper with the new kit they are running, I was hoping you picked it up! Best of luck at COTA, Dut. The build has come together so beautifully.
Love what you do Dustin. But hammering out the wheel studs with a hammer can really hurt your wheel bearings. They are made out of hardend steel that easily chips.
Good to see that the FK8 build is looking great! Been following you since your black FK8, that's why I had mine in black too, I was sad when you let that one go, but your FK8 comeback is beyond expectations man, solid build!
Are you practicing with a similulator at COTA? Braking is one of the biggest aspects when running a car at COTA. Brake fade is a serious thing at COTA. I dont reccomend regular pads tbh. Idk the brand pad you're using. Just fyi I usually use EBC Yellow Track Pads and even other HPDE Drivers tell me im not braking hard enough if i still half over half the pads left. If i attend the event hopefully ill get to meet you. Ive been on track at COTA quite a bit and am a solo driver. However ive been building the car for competition. I cant wait to be able to compete once my car is ready.
have you thought about doing a matt hood? it will dramatically reduce glare when your on the track. its not something you notice untill you try it. look at any top dog race teams they mostly have matt hoods for this reason this is also why flocking dashes is a thing.
Your CTR is almost exactly how I want my CTR to be. I love the track focus and aesthetic. I hope you kill it at COTA I’ll be watching it live on their website. Can’t wait to see the rest of the videos this week. Keep killing it Dut!!
When you gonna get some license plate frames in the merch store? Was gonna grab one but didn't see them. Waiting for that 280 video to see it finally drive.
Hey Dustin! question...... Specially on the FK8. When it comes to changing coolant. Does it needs to be burped? meaning bleeding air off the hoses? if so how can I do that since we only have a coolant reservoir? thank you!
Dustin great video here man. The tire setup would be alot safer for you not running spacers. Currently you are running a 18x10.7wide wheel with -50offset and a 15mm spacer. By running a 18x10.7 wide and -35 offset you can get rid of the spacer and accomplish the same thing. better safety as there's one less thing to fail, and lighter. Alot Lighter.
i think s2000 is a great car to learn on if you're looking to get serious and want to take your time. it will teach so much car control and help you overcome fear. FK8 is great if you want to just hop in and go .
Are your rotors installed backwards? From the video, it looks like The passenger and driver side rotors need to be swapped. Perhaps I’m wrong, but wanted to bring it up just in case…
Just saw the part of your video of what was left of your pads. I can tell you right now you probably had one session at COTA... if that.. lol just saying.
I'm going to GTA to hopefully meet you and have you sign a shirt I bought from you. Will you be racing Saturday and how can my family and I get to meet you?
I remember getting pulled over and ticketed in El Cajon for having yellow fog lights on my Type R. It was just a yellow film over it but didn’t know police actually care about that
It's so awesome to see how far the CTR has come. To me, it's great to see the class that you are racing the Type R in and how so much of it still remains similar to factory. I know that you've done a ton of mods on it, but it's still relatable. Keep up the awesome work. Can't wait to see all that's to come as you grow in Time Attack!
Using the wheel spacers on the front of the car can you change the geometry of the suspension you need to buy the proper wheels to fit the car spacers are not good on front wheel drive cars especially for racing
The CTR is almost done, so sick. Imagine a full body legends media wrap for the next race season.
coming soon!!
I'd put some mesh or something in place of the fender liners to protect engine bay n still have air flow
19:02 not me thinking Tim is helping film a reel with an iPad LOL
the type-R is coming together perfectly and she looks dope.... i love it 🔥
Jose just sold his Spoon front bumper with the new kit they are running, I was hoping you picked it up! Best of luck at COTA, Dut. The build has come together so beautifully.
Dut put some mesh where u took the finder liner out. That gonna throw rocks up and Jack the underside of ur hood and it’s gonna sound crazy
Awesome video as always Dustin. The Type R is so sick and awesome.
Damn those lights look sick!
Wicked! Hyped for CTR!
Just an idea to share, maybe a mesh grill up in the fenders so no debris fly into engine bay hey hey. 😁😁😁
Dustin his Honda Civic type R looks so good put yellow headlights already
🙌🏾 all this work will pay off! Can’t wait for the next video
Dustin how about a "cleaning the garage" video? Must be hard to find stuff in your workspace. Love how the type R is turning out btw!
Love it. Non hub centric spacers got me a lil nervous… but loving the car n vids!!!
Love what you do Dustin. But hammering out the wheel studs with a hammer can really hurt your wheel bearings. They are made out of hardend steel that easily chips.
Good to see that the FK8 build is looking great! Been following you since your black FK8, that's why I had mine in black too, I was sad when you let that one go, but your FK8 comeback is beyond expectations man, solid build!
Please put the hood mesh on the varis hood because it doesn't hinder air flow it just prevents leaves from being on the engine
The type r looks freaking cleeeeeean with the new hood! Sheeeesh!
Highly recommended paragon big brakes, if you are going to upgrade your brenbos. Paragon makes a killer set!
Cutting the fenderliner just created turbulent air by the tires. The fender liner redirects the air through the side vents which is more efficient
cant wait for this weekend! hoping to see the CTR in person
The yellow lights really add to the aggressive track look
I personally really don’t like them
Amazing stuff Dustin 🔥🔥🔥
hub centric spacers are needed to avoid high speed wheel vibration😮
Almost 750k 🎉
Car looks great to man, looking forward to some time attack.
thanks dude!
take a shot every time dustin says juicy, spicey, or beefy.
👏 Type R looks amazing!
Lookin so sick dude. Love this car!
why don't you custom the right off-set disc bell?
What do you guys think on the 2018-19 Honda civic SI thinking about getting one debating on sedan or hatch
Love the Type R series!!! Can't wait to see it rip on COTA!
Now without the fender liner, there’s gonna be a lot of rocks on the engine bay damaging and bending parts
Ohhh i also have 6 piston Calipers. I noticed yours calipers were tiny. But damn. 6 pistons will change your entire braking experience on track.
I have to run on last year's tires and make them last. Supercar 3's in 255 have been on back order and I can't get a eta from anyone on availability
congratl. i´m glad that you like it 👍
The type R is sick legends is ready for time attack
Are you practicing with a similulator at COTA? Braking is one of the biggest aspects when running a car at COTA. Brake fade is a serious thing at COTA. I dont reccomend regular pads tbh. Idk the brand pad you're using. Just fyi I usually use EBC Yellow Track Pads and even other HPDE Drivers tell me im not braking hard enough if i still half over half the pads left. If i attend the event hopefully ill get to meet you. Ive been on track at COTA quite a bit and am a solo driver. However ive been building the car for competition. I cant wait to be able to compete once my car is ready.
have you thought about doing a matt hood? it will dramatically reduce glare when your on the track. its not something you notice untill you try it. look at any top dog race teams they mostly have matt hoods for this reason this is also why flocking dashes is a thing.
Wouldn't cutting the fender liner allow water to enter the engine if you are doing a wet track day?
You will have problem with steering wheel shaking on track. With spacer without center ring you will not available put wheel in center of hub.
It does look amazing, honesty the headlights might be my favourite part haha
When pouring oil flip the container the other way and it will pour much smoother
Your CTR is almost exactly how I want my CTR to be. I love the track focus and aesthetic. I hope you kill it at COTA I’ll be watching it live on their website. Can’t wait to see the rest of the videos this week. Keep killing it Dut!!
thanks man!!
When you gonna get some license plate frames in the merch store? Was gonna grab one but didn't see them. Waiting for that 280 video to see it finally drive.
Hey Dustin! question...... Specially on the FK8. When it comes to changing coolant. Does it needs to be burped? meaning bleeding air off the hoses? if so how can I do that since we only have a coolant reservoir? thank you!
its been awhile i watched your video. what happened to the s2000..
Cool bro🔥👍💪🤝💯 l have eg6 turbo swap h2ba7
Damn, CTR is looking sick!
Maybe get some hood struts so you don't have to use the prop.
still missing the engine mounts and the whiteline antilift kit
Is the yellow headlight covers a PPF?
Looks so good!
Are you ever going to share where you are actually finishing in the classes you compete in?
Those lights looks mint, hyped for the track content and to see you rip it!! 🔥✌️
Great way to have lunch watch your youtube
Dustin great video here man. The tire setup would be alot safer for you not running spacers. Currently you are running a 18x10.7wide wheel with -50offset and a 15mm spacer. By running a 18x10.7 wide and -35 offset you can get rid of the spacer and accomplish the same thing. better safety as there's one less thing to fail, and lighter. Alot Lighter.
Cutting the liner will give more flow, but your engine bay will get dirty af from your tires slinging dirt, gravel, etc up into it.
Maybe I missed it, but, hopefully you have stainless brake lines and a high temp brake fluid?
Are going to change out rear bumper to let more air out?
eventually yes!
The CTR build is sick, but I don’t like the thing that has in the middle of the doors
Cusco clutch type diff soon dut
What’s up with the 32 wasn’t that supposed to be the race car
Can’t wait to see the the fk8 on real action grat job Dustin
You buying that grey Porsche at the end?!?! Lolol
should probably use a rubber mallet to hit those studs.
How many race cars are you gonna build
people just watch but dont like the video , like the videos guys dustin is putting so much works in the video💯❤
What’s better on track, FK8 or S2000 in your opinion having driven both with all things considered
i think s2000 is a great car to learn on if you're looking to get serious and want to take your time. it will teach so much car control and help you overcome fear. FK8 is great if you want to just hop in and go .
@@dustiinw thinking about going with the FK8 because of the power difference. Thanks!!!
CTR looks good. See you in the next one. Peace out.
Are your rotors installed backwards? From the video, it looks like The passenger and driver side rotors need to be swapped. Perhaps I’m wrong, but wanted to bring it up just in case…
Let’s go!!!
Another day another banger👌😁
Would like to see the 6 piston caliper. Been wanting to do mine but not sure about the look and fit
Awesome Content ever
LEGENDS GANNNNNNG
Banging on the wheel hub is going to mess up your bearings
All it needs is a Voltex Wing.
It looks awesome
Just saw the part of your video of what was left of your pads. I can tell you right now you probably had one session at COTA... if that.. lol just saying.
yo dustin is justin can you do a is300 street jdm build ? it would be a good give away car
I'm going to GTA to hopefully meet you and have you sign a shirt I bought from you. Will you be racing Saturday and how can my family and I get to meet you?
I remember getting pulled over and ticketed in El Cajon for having yellow fog lights on my Type R. It was just a yellow film over it but didn’t know police actually care about that
It's so awesome to see how far the CTR has come. To me, it's great to see the class that you are racing the Type R in and how so much of it still remains similar to factory. I know that you've done a ton of mods on it, but it's still relatable. Keep up the awesome work. Can't wait to see all that's to come as you grow in Time Attack!
🔥
The poor eg sitting in the back
lets go early gang
👍🔥❤️
first for once! car looks insane
You should of left the middle of the hood exposed carbon it wouldn’t sick
Every good TH-cam channel turning into a travel channel or a drift channel so stoked for having time attack content ❤
Hello
So ur telling me all of ur meat is pushed in not out on this civic NICE
🙏🏼😇🩶✨
Yellow headlights gotta go🤢
🇵🇷🇵🇷🇵🇷
Why you video always talking the same thing 😂 make you video feel boring to watch
Using the wheel spacers on the front of the car can you change the geometry of the suspension you need to buy the proper wheels to fit the car spacers are not good on front wheel drive cars especially for racing
Remember boys meat pushed in is better than meat pushed out 😂