I’m running a preamp house into your cab box. Question: Am I right to assume you just go from output on the preamp house to input on the cab box, and shut off cab simulation on the preamp house and shut off preamp on the preamp house? Or do I use send/return?
In the editor, when in the cab section of each preset, there will be a drop down menu showing all of the cabs and at the bottom blank slots for IR loading. Go to a blank slot and press the + to add an IR from your PC or Mac
I’ve been having issues with the Cab Box clipping. I’m going straight from pedalboard into the cab box. I’ve been only using the headphone jack so far so maybe that’s it. Is there any way I can fix this?
Hello! I need help! I want to connect the Cab Box to my Boss Katana amp. I’m also using a pedal board. What is the proper connection? I’m sorry, but I didn’t understand the instructions in this video. Can you please give me step-by-step instructions to properly connect it to my amp? Thanks!
Hi friend, my english is not good. Can i connect this Joyo in the output of my Zoom G5 multi effeccts? I will disable only the cabinet simulator of Zoom G5, to use power amp and cabinet simulator of Joyo. Or the correct is i disable amps and cabs in G5? And use only pedals simulator.
Can you run the direct out of the cab box into front end of a tube amp. My signal chain now is guitar into noise gate Into distortion pedal into cab box then out of cab box into a power amp mixer.thanks for any help from anybody
If I can't use this pedal with my guitar without buying another pedal (preamp), why should I buy it?! Preamp for a guitar... Preamp for bass... It's embarrassing :(
I’m running a preamp house into your cab box. Question: Am I right to assume you just go from output on the preamp house to input on the cab box, and shut off cab simulation on the preamp house and shut off preamp on the preamp house? Or do I use send/return?
How does one update the firmware on this equipment? That would be a useful video too.
Hi there @ joyo... I can't load third party ir's and the manual isn't much help. is there a tutorial video on how to load third party ir's?
In the editor, when in the cab section of each preset, there will be a drop down menu showing all of the cabs and at the bottom blank slots for IR loading. Go to a blank slot and press the + to add an IR from your PC or Mac
@@ThePilate30 thanks!
¿El CAB BOX se puede usar para bajo eléctrico?
Hola, podría usar el pxl live y usar los efectos al mismo tiempo al conectar el MIDI al cab box?
I’ve been having issues with the Cab Box clipping. I’m going straight from pedalboard into the cab box. I’ve been only using the headphone jack so far so maybe that’s it. Is there any way I can fix this?
Headphone output is far too hot. Use the right cable.
Hello! I need help! I want to connect the Cab Box to my Boss Katana amp. I’m also using a pedal board. What is the proper connection? I’m sorry, but I didn’t understand the instructions in this video. Can you please give me step-by-step instructions to properly connect it to my amp? Thanks!
Hello, could I connect the pxl live to the MIDI of the cab box and use my effects pedals at the same time?
Yes i believe thats the purpose
is there a factory reset? buying used and want to clear it out
if you use the cab box app you can factory reset it
can not connect with mac high sierra software and cab box do not comunicate , please advice .....
Does not respond to program change commands from Nektar Pacer midi controller.
Did you ever figure this out?
Hi friend, my english is not good.
Can i connect this Joyo in the output of my Zoom G5 multi effeccts?
I will disable only the cabinet simulator of Zoom G5, to use power amp and cabinet simulator of Joyo.
Or the correct is i disable amps and cabs in G5? And use only pedals simulator.
You need to be sure will there be power amp in G5, and could it be disabled.
Can you run the direct out of the cab box into front end of a tube amp. My signal chain now is guitar into noise gate Into distortion pedal into cab box then out of cab box into a power amp mixer.thanks for any help from anybody
@@michaelbullington1053 id imagine ud always want to run the cab box at the end of the signal chain. Did u get it figured out?
Yes. Turn off amp on G5 and use Cab Box as cab simulator
Connect != Collect
COLLECT
Doesn’t work with current Mac OS.
me to for windows
LA TIPA ES UNA CHINA QUE HABLA BIEN EL INGLES
If I can't use this pedal with my guitar without buying another pedal (preamp), why should I buy it?! Preamp for a guitar... Preamp for bass... It's embarrassing :(
This is a cab sim pedal and that is all it needs to be.