Really first class explanation of the detailed workings of a torque wrench, super good video and instantly worth a subscription, thanks for sharing 👍😃 from Ireland
Certified or uncertified makes no difference. You either know how to do what you are doing or you don’t! A certificate does not prove or disprove someone’s ability.
Thanks for the detailed instruction, will have to do this to my too, the handle is a bit stuck and won't turn either way, hopefully after cleaning it will work again.
Hi, the Calibration unit you have is awesome, those guys in Taiwan and China should learn from you and calibrate their products properly, cause 3 to 4 of their brand new products are missing calibration😂. However what I say is valid for few years ago and these days seems to be better quality control on theirs products. You are a cleaver man👍
Very interessting video! I paid attention to everything you did, the way you mount the tool, but mine doesn't "click" anymore, even at low torque. What else could be the reason? You may have an idee to fix it. Thanks in advance.
excellent, but the torque wrench didn't have any washers which you separately added, so how was it locking perfectly before. seems the root cause of the problem is different, any thoughts??
Question about clicking mechanism. After reassembly my wrench does "click" but it does not return to "un-click" position. So after initial "click", when I release pressure and reapply it I cannot get second click. I have already made sure I have reassembled it same as you with all parts orientated like in video. Any advice? Anything to do with that small screw by the clicking mechanism? I have removed that screw for cleaning - I believe I have inserted it exactly same as it was before. Maybe needs small adjustment?
I have problem with USAG Dynamic 130 Torque wrench. When i put it on any value, he don't click, acting like regular ratchet. Anyway it's in case ( basically new ) i inherited from my Grandpa. I dismantle it and all parts are inside, only what is missing is one thiny locker pin ( on your is two pins mine have 2 holes but one pin second is missing )
I believe the pins that your pertaining to are the ones responsible for the handle to hold in place. You can easily fabricate it. But with or without it the torque wrench should still click. Only reason i can think of why its not clicking is either the roller assembly or wrench head is assemble the wrong way or has been over adjsuted.
@@MrDIYer well thx for reply i will try to dismantle it and cleaned completely and will see again. Screw for adjusting calibration is same way insert like yours.
After watching a bunch of clicker style torque wrench disassembly video, I still don't understand why people say not to loosen bolts with clicker torque wrench. Doesn't look like anything is going to break or go out of calibration, the rocking piece is just pinning against the other side of the barrel, it doesn't involve the spring, the tension the spring is at, or the clicker mechanism at all. Seems like all the people who vouch against loosening with torque wrench is just blindly following the crowd and haven't actually dig deep and think about the reasoning. I assume the reason why manufacturers warn against doing it is to make sure users won't apply insane amount of torque that damages the pin that the rocker piece pivots on, Seems like that is the weakest part and probably first to fail if loads of torque is applied in a being used as a breaker bar situation(user blindly torqueing without any indication of currently applied torque, unlike in the tightening direction it lets you know torque is enough with a click). As long as the loosening torque isn't too big that breaks the pivot pin, the wrench should be all fine n dandy, and considering that pin won't break under the maximum rated tightening torque, the same amount of torque applied in loosening direction shouldn't hurt it.
Sir pa advise po sakali bibili ako Torque wrench alin Ang mas advantage; 1. Manual wrench + digital adaptor torque wrench. 2. Digital Torque wrench. 3. Manual torque wrench 🙏🙏🙏
Many years of use of the torque wrench,today I learned the inner workings of this instrument...thank you for sharing.excellent video.👍
Thank you
That's a pretty sweet calibration set up
Well done; this is very good content. You're an asset to the digital neighborhood. Head of the class, I say!
Really first class explanation of the detailed workings of a torque wrench, super good video and instantly worth a subscription, thanks for sharing 👍😃 from Ireland
Certified or uncertified makes no difference. You either know how to do what you are doing or you don’t! A certificate does not prove or disprove someone’s ability.
Thanks for the detailed instruction, will have to do this to my too, the handle is a bit stuck and won't turn either way, hopefully after cleaning it will work again.
Heres a link toy homemade water cooled air compressor th-cam.com/video/tNmAcYsSxIw/w-d-xo.html
Brilliant video. Love your 'calibration bench'.
Thank you
Awesome content, congrats from Brazil!
Thank you for the detailed approach. A real help to me.
You are a wonderful person 💕
Hi, the Calibration unit you have is awesome, those guys in Taiwan and China should learn from you and calibrate their products properly, cause 3 to 4 of their brand new products are missing calibration😂. However what I say is valid for few years ago and these days seems to be better quality control on theirs products. You are a cleaver man👍
Great video
Thank you very much, perfect!
Present ulit Sir 🙋
I like your car ramps!
There pretty cool
Thank you. Made from a discarded draignage canal grill. Lol
It would be nice to see what the the calibrate screw actually adjusts (the side-on pin?) on the end of the internal bar. Good video.
Good job.
Very interessting video! I paid attention to everything you did, the way you mount the tool, but mine doesn't "click" anymore, even at low torque. What else could be the reason? You may have an idee to fix it. Thanks in advance.
that diy torque calibration tool is crazy bro 😂. nice job ❤
Thank you 😅
Is this what I’ll do if my torque wrench is hard to adjust? When I twist it I feel resistance.
excellent, but the torque wrench didn't have any washers which you separately added, so how was it locking perfectly before. seems the root cause of the problem is different, any thoughts??
Great!
What grease are you using?
Super
1:10&1:35sec. Ads completed keep watching and support from Al Khafji Saudi Arabia 👍
Question about clicking mechanism.
After reassembly my wrench does "click" but it does not return to "un-click" position. So after initial "click", when I release pressure and reapply it I cannot get second click.
I have already made sure I have reassembled it same as you with all parts orientated like in video.
Any advice?
Anything to do with that small screw by the clicking mechanism? I have removed that screw for cleaning - I believe I have inserted it exactly same as it was before. Maybe needs small adjustment?
Either the screw was over adjusted or the roller assembly or head wrench itself was assembled incorrectly.
@@MrDIYer Correct! The head was messed up. Managed to fix it after lengthy try and error ;) Thanks!
hi po, how do you fix if the locking mechanism is stuck to being locked and can't be turned/twist for unlocking?
I have problem with USAG Dynamic 130 Torque wrench.
When i put it on any value, he don't click, acting like regular ratchet.
Anyway it's in case ( basically new ) i inherited from my Grandpa.
I dismantle it and all parts are inside, only what is missing is one thiny locker pin ( on your is two pins mine have 2 holes but one pin second is missing )
I believe the pins that your pertaining to are the ones responsible for the handle to hold in place. You can easily fabricate it. But with or without it the torque wrench should still click. Only reason i can think of why its not clicking is either the roller assembly or wrench head is assemble the wrong way or has been over adjsuted.
@@MrDIYer well thx for reply i will try to dismantle it and cleaned completely and will see again.
Screw for adjusting calibration is same way insert like yours.
Voy ha comentar cuando el video lo traduzcan al español
pinas ka sir? kaya mo gumawa
After watching a bunch of clicker style torque wrench disassembly video, I still don't understand why people say not to loosen bolts with clicker torque wrench. Doesn't look like anything is going to break or go out of calibration, the rocking piece is just pinning against the other side of the barrel, it doesn't involve the spring, the tension the spring is at, or the clicker mechanism at all. Seems like all the people who vouch against loosening with torque wrench is just blindly following the crowd and haven't actually dig deep and think about the reasoning. I assume the reason why manufacturers warn against doing it is to make sure users won't apply insane amount of torque that damages the pin that the rocker piece pivots on, Seems like that is the weakest part and probably first to fail if loads of torque is applied in a being used as a breaker bar situation(user blindly torqueing without any indication of currently applied torque, unlike in the tightening direction it lets you know torque is enough with a click). As long as the loosening torque isn't too big that breaks the pivot pin, the wrench should be all fine n dandy, and considering that pin won't break under the maximum rated tightening torque, the same amount of torque applied in loosening direction shouldn't hurt it.
+5:23sec. Ads completed keep watching and support Filipino Vlogger 🙏👍😘
Sir pa advise po sakali bibili ako Torque wrench alin Ang mas advantage;
1. Manual wrench + digital adaptor torque wrench.
2. Digital Torque wrench.
3. Manual torque wrench 🙏🙏🙏
Kung kaya mo naman bilhin both mas ok. At least magamit mo yung digital para ma check calibration ng manual
@@MrDIYer 🤣Salamat po sa advise. pang Yeyemenin na advise yun Sir ah 🤣🤣🤣
Oops tried to press thumbs up and missed did it again but think I may have hit downvote. Great video thanks