Yamaha FZR 1000 Exup Full engine restoration Part 4
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- In this part of the series I'm removing the valves off the cylinder head, but before I do that, I'm checking if the valves seal properly to provide adequate compression to the combustion chamber.
Then I clean the cylinder head and valves, to see what's the damage under all the carbon that was building up for the last 25+ years!
Watch the previous video here:
• Yamaha FZR 1000 Exup F...
Watch the next video here:
• Yamaha FZR 1000 Exup F...
Follow me on Instagram:
@chris_sofotasios_
Other videos:
Yamaha FZR1000 Exup engine restoration:
• FZR 1000 Exup Full eng...
Yamaha FZR1000 Exup restoration:
• FZR 1000 Exup '95 rest...
Yamaha YZF750R:
• Yamaha YZF 750R '95
Chevrolet Camaro 3rd Generation:
• Chevrolet Camaro IROC-...
MG Midget MkIII:
• MG Midget 1967 MkIII
Technical videos:
• Technical videos
Great explanation of how to proceed with the engine repair. Thank you. 👍👍
Thank you! I appreciate your comment
Awesome work, following in your footsteps for my 88 Fzr1
Thanks for your comment! I love the older FZRs!!! Just keep in mind that many things are different from my model. If you need any help with measurements or anything else, let me know. Good luck with yours!!!
Wow 5 valves per cylinder!
So if you had a set of ABUSO stainless steel black nitride coat valves in your fzr that whole sanding of the valve would not be good for that black nitride coating on the valves
You are absolutely right. Not a good idea. Even though I've done the same thing in my FZR 400 valves and it still runs without a single problem to this day.
However, on my next project I'll use glass bead blasting to clean the valves. This won't affect any coating.
Cool!
καλη υπομονη Λακη !!!!
Ευχαριστώ ρε! Θα μου χρειαστεί 😂
Γεια σου ρε ΜΑΓΚΑ απο την Κυανη !!!!
Γεια σου ρε Σαλονικιε!!!!
Bit worried about what i'll find in my 87s cases, its still running strong and doesn't jump out of any gears, but it does have that worn engine smell when you start it and whines a bit on over run at low revs. As soon as the 86 1100 GSX-R is 100% finished I'm stripping the FZR down.
Your FZR seems to be in good condition! Of course, you can't tell for sure until the engine is apart. Make a video when you do the job!
Great help to those with this engine. Do you know if the valves are the same as other engines. Maybe a Yamaha 250 single? Thanks
Thanks for your comment. I'm not really sure, but I don't think so. You can always go to megazip.com and find the valves of the models you want and compare them.
Amigo tenho duas fzr 1000 ano 93 me ajuda por favor ???
What exactly is the problem with your FZRs? How can I help you?
Combien les Réglage soupape d'échappement et admission constructible de base
You mean how much does it cost?
Wow, what's the tank size on your Ultrasonic Cleaner? My 3L one is wanting for more room!
Hi Tom. Mine is a 30L and I happen to find it in a great price. However I need to buy a 3L one for small parts so I won't have to wait the big size tank to heat up before every job
URGENT. I need hi rise handle bars for 87 fzr 1000.Any sources?
I never had to do a research for that, but the only thing I found was this. It's for the later models though. You can always ask them if they do for your '87. Quite expensive!!!
www.nicecycle.com/ConvertiBARS-Handlebar-Riser-System-p/convertibars143.htm
@@ChrisSofos Thank you.I will
The problem you are going to have is with the fairing and clearance, the bars mount below the top clamp on this model, whatever you do, DONT cut away the fairing, as these are rarer than unobtainium (i know, ive been searching for a 87/88 headlight fairing for 2 years 😣)
@@uhtred7860 You can have mine in exchange for the hi rise handlebars.
@@zafar78600 Serious? Because I would be into that👍 what country do you live in? Just wondering about postage.
HI Chris, have you seen this guys channel? th-cam.com/video/LePA5mIYIdk/w-d-xo.html
Its a young guy working on an old 86 GPz 1000RX, its rough....real rough, but its interesting to watch him work on one of Kawasakis forgotten superbikes.
Yep. Saw that 😊