Axial SCX24 Mod19 Microshark Build!
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- I build a custom Axial SCX24 using Mod19's Microshark conversion kit. This is a fun and rewarding upgrade to the very cool SCX24 platform. Printed at Shapeways, this tube chassis buggy makes the SCX24 not only look better, but much more performance oriented!
Check out the complete step by step build on the forum here: scalebuildersg...
Buy all the Mod19 Microshark printed parts required here: www.shapeways....
Parts list:
1) Complete SCX24 (duh!) **Deadbolt version only until I can confirm more about the new JL Wrangler**
2) Mod19RC Shapeways Parts
- Micro Shark Frame for SCX24
- Chassis Parts for Microshark Conversion (not optional!)
- Hood and Grille for Micro Shark (Type S or Type T)
- Roof + Rear Panel for Micro Shark
- Left Body Panel (Type S or Type T)
- Right Body Panel (Type S or Type T)
- Fuel Cell + Cooler Rear Cover for Micro Shark(optional)
- Seats for Micro Shark(optional)
- Dash for Micro Shark(optional)
- EMax ES08MAii Servo Mount for Micro Shark
- SCX24 Improved Steering Links (recommended)
3) M1.2x3 Flat Head Screws. Here is the best source that I have found.www.metricscre... head shape and diameter are important, as that is what things were designed to. These require a 00 Phillips screwdriver to install. You need (32) of them, but order extra...they are small and elusive.
4) Servo www.amainhobbi... The mount and chassis are designed to fit this servo.
5) Connectors/Leads to make battery wire extension.www.amazon.com...
6) 1mm Diameter Drill Bit. for cleaning out holes of 3D printed parts.
7) You may want to consider a set of Mil Stone Wideners if you plan on using the stock wheels and tires. They can be found on ebay and there is a set specific to the SCX24. www.ebay.com/i...
Our merch is super cool: teespring.com/...
#axialscx24
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Fall 2019 Stickers are sold (already) out but we're still offering patches! Check them out here: scalebuildersg...
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuilde...
► Merch available here:
teespring.com/...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
Great video of the assembly, Matt. It helps to visualize the assembly steps so much better!
Freaking sick digging that detail you put into the interior and all in all good looking Rock buggy
Thanks!
I gotta say I enjoy watching everyone of your videos, no matter how small they are. Great work!
Running video is a must !
Definitely!
And that’s why this is THE Scale Builder’s Guild! Thank you, awesome video.
As of 122019, it's about $146.50 for the printed parts, $9 servo, $30 wheel spacers and $110 for a 1/24 Deadbolt. Plus, shipping charges and ancillary items like screws, wiring, paint, etc. $300+ for a completed rig.
Looks great! Super cool set up! Props to the designer!
Wow I didn’t even realize this was you, you always do great work it’s just anytime I watch your videos you always have a good energy and this was just quiet still very entertaining I watched the whole thing and went to the comments and seen you pinned someone’s comment and then I was like whatttt this is his video lol
That is a really cool build video, I had no idea you could go that far with an SCX24. This mod kit for it makes it super cool, and it is pretty cool seeing some of your techniques, thank you for sharing, great video. 👍👍👍👍👍
You are quite an artist my friend...love this build. Thank you Matt.
this thing is soo freaking rad!!! love the detail and the body panel screws!!! nice paint job for the interior, very relax video, thank you!
Wow! That came out looking cool! Looks like a miniature axial wraith!👌😎👍
What a fantastic project. The painting details are awesome. You are a creative scale builder, my friend!
Dude, it’s like you read my mind! Or my posts asking you to hit this little rig up! You da man!! Thanks SBG!!
cool, got that scx24 wraith option now that i commented about in your first video when it came out. nice video, i might have to actually look into it if my ither ideas dont pan out.
I feel super spoiled, it seems your putting out videos way more often and I gotta say I appreciate it!
Great build.Makes me want to get my wraith off the shelf and get it back together with all the SSD parts stocked up on to to make a nicer performance rig.Thanks for sparking my interest again.
Beautiful, expensive but beautiful.
I am SO gonna do this, this looks freaking awesome!
Go for it!
@@scalebuildersguild Did the injora buggy instead since it still looks super awesome but it's 1/5 the price!!
I never cared to have an SCX24 until now. So sick!
Matt, this is one of the most incredible Micros I've ever seen!! 👍👍😎
I wish I could get a SCX24. This is the sort of thing I'd love to do to it.
Carmine ✈🚂🚙
Good god I knew they were small but seeing your hands working!! Looks great sir!
As soon as I got my SCX24 I wanted it to look like that. But sadly my skills weren't up to the task. Nice to see somebody with the skills had the same idea.
Just got one ordered for my birthday.
Happy Belated Birthday! Thanks for watching!
@@scalebuildersguild no thank you. I just got it in today! Definitely gonna be watching this video when I’m putting it together!
Great video shows great skill on something so small. The chilly bin made me stop for a second though that’s a new term for me.
It’s all the rage in New Zealand!
That looks amazing. Well done, much better than the original.
I want to get a couple of these for the backyard. Find a couple cool model bodies and do a bit of customizing.
Pretty wicked. You basically just built a 1/24 Wraith! Let's see a run vid and compare to stock. -"Angry" Dave
Hello from southeast alaska. This is a cool build
Your so lucky dude I’ve wished for something like that since I’ve been in the hobby. Looks so cool tho
well shoot now I have to add an scx24 to my micro collection! this would make a great micro u4 truck! sold me!
Super nice!
That is so cool. Great work on the build
Axial wraith 1/24 keep up the good work man
Awesome little build, lego blockCrawler!
Wow, what an informative video. Your work is highly impressive. Well done. Finished product came out fantastic.
I'd also love to see a running video, if you get a chance. 👍✌️
Woww! !! ...troppo bello questo modello !!!...bravo bel lavoro !!!..complimenti! !!
That’s too cool!!!! Great work from New Zealand
Dude.
This is awesome.
⭐⭐⭐⭐⭐😎👍👍
This is pretty cool. I’m gonna do this to mine when the time comes. I have a shelf with 3 or 4 crawlers I’m gonna overhaul and make different. But I want a bigger motor for the scx24 I’m tired of these ones that burn out every 10 or 20 hours of run time
Waaa very good Job !! 👌🏻👍🏻🍻
I have to say I love the vide I have learned so much for you videos
Great kit, looks awesome! The only problem I have with it is that the kit is nearly twice the cost of the base truck. Unless Shapeways comes down from their prices, I don't see a lot of these being sold, unless someone just has money to burn.
You might be surprised at how many have been sold.
Wow it looks awesome. Thanks for the vid really enjoyed it.
OMG its epic! SO much better than stock, although I love that hardbody! You so need a DooRok from Tiny4x in your collection thou! 1/36th complete epicness!
I Love it! Congratz 4 the build ! ❤🚗💨
All I saw were #manhands - great video! I know how much work goes into that type of video.
In case you're wondering, it's $185.11 for the 3D printed parts, $18.88 for the screws, $8.99 for the servo, and $32.99 for the mil stone wideners. I couldn't find the exact JST extension kit, but it's probably inexpensive. So, a total of about $245 for the mods, not including tax and shipping. Total vehicle cost would be about $355. I love the results, but think of what you can buy for $350.
Wow!! What a transformation!! Great work man.. Still wondering if I like the look of the cage without the panels?? Thanks for sharing
Making me want a scx24
Man that so cool Matt. Love it.
I want one like this, looks fun.
Nice job Matt, not my thing but that is what makes this hobby great. I think that cage and interior would look. Great in a Jeepspeed CJ. Only question is where is your driver so you can get some running videos. What was the pickup body from?
Tacoma was an AMT model kit! Driver will be in there eventually!
Does look so much bigger as 1/24 👏🤙
that really is great Matt!
Well this was relaxing and then I got spooped at the outro
Awesome little rig cheers
Great build my friend! 👍🍻
So cool what a difference...
Do you think they will make a chassis like this for the FMS FXc24? I would like to make a real cage for these 1/24 trucks, i think that would be hilariously awesome. I think this would scratch that itch for now, such a cool build.
Ive watched this vid probably 5 times. Good vid! I just ordered my micro shark parts and cant wait to build it. This vid is good but missing your usual amusing commentary!
I really really really want this form factor SCX24. Now you've made it hard for me to justify not doing it! Need to find out where I can get it printed here in AUS
Good luck! I wish I knew some AUS resources to help you out!
@@scalebuildersguild Ordered from Shapeways and it turned up all fine. I have gone to the 9's upgrading it - Injora high clearance links, Komodo micro brushless and the matching micro ESC, metal shocks etc etc. It's a little beast and pretty much unstoppable :) Thanks for the inspiration, and especially guidance with this vdeo - it really helped me a lot with the build
Cool video
Thks for sharing bro
Dam! The smallest bad ass I've seen. You should call it Badger!!
Right on!!
Amazing! I love it.
Nicely done.
I know its an older video now. Just doing a little ripper chasis after watching this what colour is the body it says ts5 but there isn't one . Was it discontinued maybe. What would be a very close colour to this pls 🙏 great job 👏
Such a cool build but whats with it not being offered as a build kit in raw for like LGRP? Thats a let down in a sense. Still considering which kit to go with....
Those were the smallest zipties you could find? I like it! Makes me want to get one where as before i could take them or leave them.
Found it 😎
Mesmerizing
awesome build, how much did you spend on all the shapeways stuff?
Around about $160.
these do look really sick but the pricing is absolutely absurd in my opinion. great video though, looks super helpful
especially considering it includes no hardware whatsoever.
Not everything is cheap, but the results speak for themselves.
Citadel paint is great if you water them down a bit u get no brush marks either🖒
Works great without watering down too!
Soooo sick
Very cool build. What would you say the cost is for complete build?
That looks so good but i don’t wanna spend that much on a body 😅
A little late for this build, hard to find the difference between the type T and type S? What did you build, looks good. They ,Shapeways, has a chassis kit for the C10 to use on the micro shark.
Thanks for any feedback.
The 3D printed nylon will hold up better to dirt if you clear coat it first :) The nylon tends to absorb dirt and crap very easily and it’ll never get clean again after....
I'm not too worried, it'll see the majority of it's life right side up! Ha!
Also dirt builds character ;p
i want to build one so bad
could you also use the stock servo !??
You could, but the clearance is a little tighter, and this new one will last longer.
Wicked .. looking sweet!!!! NC❤ MOUNTAINS Backyard RC and MORE 🏞🖒💯👌
I miss your face, your voice..... How am I going to sleep tonight? All I have is this dope ass beat. Nice build BTW.
Many Lolz
That is sweet.
Just wondering because I want to build one of these and allready have a deadbolt and some new parts for it and would like to cut cost where I can.
1. I have an emax servo already and an aluminum servo mount for it, would any emax servo mount work?
2. I have carbon fiber chassis rails, I’m gonna guess those won’t work with this kit?
where did the Toyota body come from matt. I would rather have a yota body on it
This does have a FJ hood and front clip, but that Taco was an AMT model kit.
Where i can buy this hardbody?!?
@@christophergagnon2799 It's a Tacoma model kit from AMT. So anywhere they sell static models?
Just a quick question, where did you get the extended front top 3 link?
I am wanting to extend my c10 and only need the extended triple link
Beautiful but it looks like it will make maintenance a pain in the ass
😍😍😍 I love it 😍😍😍
Hey bud I haven’t seen a video from you in awhile is everything ok with you
Is it a kit and can I buy it ? Look great and you need to talk.
All the links are in the description!
That was fun;)
Sometimes it's better to use blue painters tape rather then blonde tape. Just fyi.
I like the Tamiya tape for quick, non-tack applications like this.
Besides the side panel screws (I ordered them already), are the existing screws all that’s needed to complete the build? Epic build btw. You fueled my desire to build one. Thanks!
There are enough screws in the stock SCX24 to do the build.
RexRacer19 Appreciate the feedback!
The link you put for the hardware doesn't work. Would you have another one? Can't find hardware here in Quebec so far.
Click through to the first link to the forum, all the links work from there.
what body was the truck one in the beginning of the video?
Can you answer a unrelated question for a newb please? I want to buy and run a "yeti Style" model for fun speed use rather than crawling or trail. The Yeti is discontinued in the UK at least. Could you recommend a Yeti/wraith model style I can bug a fast BL setup in? thanks
Bomber would be a decent choice. Set up properly, it can be just as fast. You lose IFS, so if you’re desperate for that, pickings are slim. Perhaps a Traxxas UDR without the body?
awesome build. what was the hard body you started with?
AMT 24th scale static model!
Would you recommend this conversion for a beginner? Ps great video
Good question! It's not too difficult to assemble, so take your time and have the right tools!
Scale Builder's Guild thanks man
I've ordered shapeways Suzuki Samurai /proline sumo parts and spent over $200 on them. I imagine this one cost about the same?
I believe total cost from Shapeways is $158