GodSpeed Camber Plates Install | BMW E46
ฝัง
- เผยแพร่เมื่อ 25 เม.ย. 2018
- If you guys enjoyed this video and like the cool cars we’re building make sure to give this video a thumbs up and subscribe to stay up to date! Thanks guys!
► Parts Used In This Video
bit.ly/GSCamberPlates
bit.ly/ECSTuningCoilovers
► Buy Our Merch!
www.staticworks.co
►Social Media
/ staticdanny
/ staticmartin
/ staticworks.co
►Send Us Stuff Here!
P.O. BOX 4600
Ventura, CA 93007
►Music (No Copyright Intended)
#staticgarage #bmw #e46 - ยานยนต์และพาหนะ
![[TH] 2024 PMWC x EWC Main Tournament Day 1 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/f5Coja1zCzo/mqdefault.jpg)
Hello, yes, it is I. I've subscribed because small car channels are always where it's at 100% content and not clickbait
Cowboys! Vice grips on the damper shaft! Stock E46s already have too much camber and wear out the inside of tyres. Putting more camber on for track use is understandable but increasing camber just so you can put spacers on is just bad news.
Bad form man- vice grips on shaft is bad. You need a front wheel alignment after fitting, that’s why your hitting ‘ya caster is out’
Notification gang🔌🔥keep up the great work‼️👌🏽
The camber plate quality looks great. There was a time years ago when only one or two companies made these and we had no choice but to pay 2X or 3X the cost for most modifications.
You are killing it!
Thanks man!
like it bro, keep up the good content
Something bout your e46 looks so dam clean never seen one like it keep up the work bro 👌🏼
Thanks dude! ✌️
i just binged watched all of your e46 video you’ve just become my favorite youtube AND i want to get a g35 so good on you m8
Thank you I appreciate it!! More e46 shenanigans soon! ;)
CAMBER GANG
Thanks for the install video. I’m trying these on my e92 tomorrow. Will update this comment after i slap them on and get aligned. Hoping that the bolts tighten well and that there’s no extra spring bind introduced
Hope it works well for you sir
Awesome! I'm thinking of doing this to my car as well, I've got an MK1 Mazda Speed 3 tho.
Yeah dude see what options they have!
I watched your carbon air intake video and was wondering what you did to your exhaust to make it sound so good 😍. I’ve got a 325i
Sick man hope you can adjust it to the point you want!!,👍👍
Thanks!
do you feel a difference between ecs coils and tein coils, if so which do you like better
Pre load left the chat 😂😂😂
Did this all work out for you ?? I think I need new cambers myself or need to adjust them
Mounts look good, but looks like you ruined you shock shaft with those vice grips. The hex fitting on the top of the shaft is so you can hold it while you loosen, or use air impact.
Lol butchers using those vice grips, I stopped watching after that 😂
do they fit on maxspeeding ?
You grabbed the shock piston with a vice grip...
WARNING these plates are installed wrong! they need to be rotated 90 degrees. You are using the caster adjustment for camber and vis versa.
90 degrees which way
Will these camber plates fit with a regular strut? I don’t have coils I’m running springs.. nice vid!
I'm not sure. Contact GodSpeed on Instagram or by email! Thanks for watching!
Static Works just hit them up on insta thanks bro
Nope/ Will not work. See here.
www.redline360.com/godspeed-front-camber-plates-e46-m3-MSS-THE02
Hey guys. Curious but did you use any of the adapters that come with the camber plates. Thanks.
I did not
Well you forgot the torrington bearing. It's super important so the coil doesn't bind. Notice how the old mount spins? The new one also need to spin.
Forgot to link the grill, but as always love the videos!
I believe the company I got it from sold out!
Use the jack that came with the car it's the best OEM jack I have ever used!
What size are your rims and tire specs?
18x8.5+30 squared
Tires are 225/40/18
3:51 deez nuts
How are the plates holding up after a few years?
Held up when I owned the car I’m not sure about now!
There's always the bmw douchebag that has to complain and say you have to buy the stupidly over priced parts to do something the right way.
How are those ECS coilovers holding up so far?
Amazing. Have no complaints thus far. Even with the coilovers being completely maxed out on the rear and the front have little adjustment left, it still rides great.
Did you guys get an alignment after to see that your numbers look like after the install?
I'm running -6 camber all around
daaaaaaaamn!
Ouch shock shafts
What headlights are these?
Some cheap aftermarket don’t recommend haha
how do the ECS coils ride compared to stock?
Honestly they ride amazing. That's also a con because they're not the stiffest springs and don't have dampening. Since I'm practically maxed out on the coils it hits on bumps since the springs aren't stiff enough. Other than that I have literally no complaints! I live the low life and accept the struggles haha! Best bang for your buck.
Why didnt you put 19 ..10j on it with a 30 tire..fits a lot better and you dont need the camber plates. Like youre videos bro keep up the good sh#t greets from the netherlands.
Any knocking sound when turning?
They're used to be. I took it all apart and greased up the metal parts where the Camber Plates connect to and it was gone. Now I'm not sure whether it's the grease or re assembling it that stopped the noise haha
So I greased all the parts and I placed a washer in between the camber plate and the top of the coilover. That fixed the knocking sound. Thanks again for uploading your videos and helping us all on our DIY projects.
coilovers raceland?
Bruno Fialho yes they’re Raceland! I just bought some for my 330i for around $460
Feel like you forgot all about the g man 😪
I sold it
Great video guys! Just subbed, you should check out the video I uploaded yesterday about the carbon fiber trunk lid I put on my e46 m3!
90% of bolts on an e46 are 13mm lol
Camber is out OR in angle.
CASTER is forward or back. Two separate adjustments. Looks like you have to pre set the caster (full forward is usually good for street). I cant see that you have access to the caster bolts once everything is installed.
I think I will PASS on these cheap as plates since they have a spherical bearing up top. NO NEED for that in a street car. Too harsh.
The ride quality has surprisingly been really nice even with all the suspension upgrades including a strut bar. Or maybe I'm just used to it haha!
There is a reason that most of these plates are expensive
"Turner E46 M3 Street Camber Plates - General Information Race camber plates (with solid spherical bearings) are great for the track, but what if you want to drive your car on the street too? That’s what the TMS E46M3 street style caster/camber plates are: A plate you can use on the street, still have the available adjustment of a race camber plate, and not have to put up with a harsh ride or
replace the bearings every season."
Especially the last part.
www.gmpperformance.com/detail?pid=248674
Good information man! I'll eventually upgrade to Turner's. Thank you!
Really need that urethane bushing up top. Ask around. Spherical bearings do NOT belong in the street. They can cause failures of adjacent components.
Ground Control and Vorschlag (and others) are just as good. Buy what you can find a deal on.
Do you have ANY idea where your CASTER is set? Not even mentioned. This is a critical value for stability. I run my M3 FULL caster on the street. Zero toe in the rear and just a tad toe-in in the front. -1.5 camber in the street.
Your drop should NEVER be cosmetic. Proper drop on an E46 will have more tire show up front than in the rear.
Measure from center of wheel to fender lip.... for an M3 is 13 inches rear and 13.5 inches front. This keeps the weight bias as close to 50/50 as possible. Dropping the front so it LOOKS the same as the rear will have very negative results compared to the proper way.
I have owned my M3 since 2008 and have $35K in mods. Mods that work perfectly!
Great ON or off the track!
th-cam.com/video/z8_HuYoVE-0/w-d-xo.html
Not me. But is shows you how to set your springs by hitting speed bumps while adjusting. Realize you may need to re -adjust in a month or tow due to sag.