WD-40 isnt really bad to use, but in this case with a delicate circuit board inside like the sensor shown i would use contact cleaner. Good enough to clean and keep the safe from getting damaged in any way
One of the video I see detail testing will you answer - Input and output flow is same of diffrent ? Can you tell Also all purge valves working like this?
I get error "canister purge solenoid valve circuit" open circuit in my Renault Twingo 1995 with an Delco Remy 199 solenoid. I checked continuity to the ecu and resistance of solenoid and check it with a vaccum pump but still error keep coming back, what could be the issue?
hello is there a way to unlock the valve,when it remain opened even it s connected to the battery?os it possible to open on the back ro clean?thanks to share your exeperiences
Yeah it could, anything in the EGR system like this valve or clogged canister could cause erratic bad gas mileage. Also check your vaccuum tubes for cracks or wear, also check or replace the PCV valve which is cheap. Really dirty intake sensors could too.
Yeah the video did use WD-40 which I would honestly recommend against. I would first CLEAN it with a big dose of carb / throttle body / sensor cleaner because it's an actual cleaner and dries fast, then when good and dry, hit it with a small shot of white lithium spray lube .
It’s only 83 seconds long 😂 Come on guy? There are videos that are 40 minutes and more but I would still be afraid that you don’t have the tools they are using or the understanding of what to do. Yeah, take your car back to the dealership, they only will charge you anywhere from $120 to $150 for a diagnosis. Take care guy!
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
Tnx a lot. You save my day!
Thanks a lot, it is very helpful indeed.
It takes 10 minutes of the engine running before it opens. So test it with a warm engine.
WD-40 isnt really bad to use, but in this case with a delicate circuit board inside like the sensor shown i would use contact cleaner. Good enough to clean and keep the safe from getting damaged in any way
Thanks for posting this video.
Informative!!!thank you
Thanks😊👍👍👍👍👍👍👍
One of the video I see detail testing will you answer -
Input and output flow is same of diffrent ?
Can you tell Also all purge valves working like this?
Thanks alot
I get error "canister purge solenoid valve circuit" open circuit in my Renault Twingo 1995 with an Delco Remy 199 solenoid. I checked continuity to the ecu and resistance of solenoid and check it with a vaccum pump but still error keep coming back, what could be the issue?
You put air through what mouth or compressor
Hi buddy:)
Just unplug it. Does it have vacuum? Its bad.
hello is there a way to unlock the valve,when it remain opened even it s connected to the battery?os it possible to open on the back ro clean?thanks to share your exeperiences
the logical unit controls when should valve opens and closes!
@@OliverTube do you think it is possible open the black back tube to extract the piston to clean it?thank for the answear
@@OliverTube do you think it is possible open the black back tube to extract the piston to clean it?thank for the answear
Crazy thing is I just bought a new one from Amazon and its already stuck open. Unbelievable.
will this cause bad gas mileage cause my car chugs gas at random times not always
Daaaaa!!
@@OliverTube whats daaaa is it duh like yes? thanks
@@justinc9911 Communist version is like this!
Yeah it could, anything in the EGR system like this valve or clogged canister could cause erratic bad gas mileage. Also check your vaccuum tubes for cracks or wear, also check or replace the PCV valve which is cheap. Really dirty intake sensors could too.
Speak Softly and carry a big purge...
Thanks for these video is a little to fast I CAN NOT READ BOTH SE MANNY TIMES
did you clean it with WD-40 or carburetor cleaner or?
It says WD-40 on the screen when he's spraying it into the straw. I would think carb cleaner would work just as well, though
Yeah the video did use WD-40 which I would honestly recommend against. I would first CLEAN it with a big dose of carb / throttle body / sensor cleaner because it's an actual cleaner and dries fast, then when good and dry, hit it with a small shot of white lithium spray lube .
i wanna bypass mine
Non speaking video 👎👎
You can turn on the subs on!
Oh yes I got one of those gadgets in my pocket let me get it out real quick😶😣 I can't stand when videos have wasted my time
A multimeter and some straws?
Take it to the dealer then ya genius...
Thanks for posting how to clean the purge valve my husband looked all day but could only find how to find them . Your video was very helpful
Yea, this kind of response isn't needed. If you don't have the tools, you might not want to be working on it then.
It’s only 83 seconds long 😂 Come on guy? There are videos that are 40 minutes and more but I would still be afraid that you don’t have the tools they are using or the understanding of what to do. Yeah, take your car back to the dealership, they only will charge you anywhere from $120 to $150 for a diagnosis. Take care guy!