I have the same cover for my 2022 Frontier that I got from Amazon. I would recommend putting a wing nut on the front clamps so that the screw on clamps doesn’t loosen up.
Thanks for the video. Just installed this on my 2022 Tacoma SR5. Took a bit of eyeing to make sure it was in the proper position on the bed, but the installation was a breeze. Reviews on Amazon seem to be hit or miss on wether or not the mounting hardware is included or not, but mine had everything that was needed.
Good information about the forward bulk head rain gasket. That one was a pain for me to get it to lay down. It was like wack a mole. Get part of it down and flat and just about finished and part of it folded back. Drove me bananas 🍌
I got my cover and it fit perfectly fine except for the end piece, I have no where to Latch it too. I notice you have the extension piece. Where were you able to find those or what is it called
Why did you switch to the thicker rough country cover? 1. Was the flush mount not sealing well? 2. Did the flush mount pop lose? 3. Was the flush mount too weak?
I've been looking at this one since it leaves the rails open ... mostly. Seems like most all tonneaus cover them up. And it's definitely the right price. Your video helped me see it has 6 attachment points. Some of the other clones, Tyger, Extang, TonnoPro, Lund, etc, only have the front and rear points. Might make it a little more secure. But you mentioned an update to come I don't see. Maybe it's mixed in somewhere. How's the DNA tonneau working out?
Appreciate the videos. I’m trying to decide between the two. Which do you feel is higher quality, better made and fits best? This one is cheaper but do you feel the Rough Country is better despite the price?
Nice video and I appreciate you pointing out early on that it's "Made in China". I choose not to support China as must as possible so this option is out for me.
Tacoma 5ft Bed DNA Motoring Tonneau Cover ► amzn.to/3CjAvzM
DNA Motoring Covers for Other Vehicles ► amzn.to/30lWokX
I have the same cover for my 2022 Frontier that I got from Amazon. I would recommend putting a wing nut on the front clamps so that the screw on clamps doesn’t loosen up.
They started adding these with the kit. Just bought one.
Thanks for the video. Just installed this on my 2022 Tacoma SR5. Took a bit of eyeing to make sure it was in the proper position on the bed, but the installation was a breeze. Reviews on Amazon seem to be hit or miss on wether or not the mounting hardware is included or not, but mine had everything that was needed.
That you can stand on it is what sells it. That is something I want. Also, easy total removal for hauling horse manure.
I recently bought the same bed cover for my 2022 Nissan Frontier!! It’s all the same, attachments. Works for for Tacoma and Frontier with 5 foot bed.
Just ordered mine! thank you for the wonderful video! Cheers!
Great video. Thank you for saying female part.
Thanks very helpful
Good information about the forward bulk head rain gasket. That one was a pain for me to get it to lay down. It was like wack a mole. Get part of it down and flat and just about finished and part of it folded back. Drove me bananas 🍌
Just got mine without the mounting hardware for the bed rail on my 2021 Tacoma.
Now what? I'm about ready to order one. Did you notify anyone? Now I'm about worried about ordering it.
So according to you, this will fit my 2021 Tacoma short bed?
Correct
@@GearKnowHow thanks
What is it?
I got my cover and it fit perfectly fine except for the end piece, I have no where to Latch it too. I notice you have the extension piece. Where were you able to find those or what is it called
Did you ever find where to find the extension piece?
Why did you switch to the thicker rough country cover?
1. Was the flush mount not sealing well?
2. Did the flush mount pop lose?
3. Was the flush mount too weak?
No issues with the RC Low Profile so far, but I needed a thicker one for a Roof Top Tent set-up I'm working on. Video on the set-up is in the works.
Ok.... thank you
@@GearKnowHowthat’s a good idea… I need a tent set up for track days. Thanks!
thank you very much 😀
So that tonneau is not lockable to secure the cargo inside from being stolen?
It latches closed from underneath and then you can lock the tailgate and be relatively secure.
I've been looking at this one since it leaves the rails open ... mostly. Seems like most all tonneaus cover them up. And it's definitely the right price.
Your video helped me see it has 6 attachment points. Some of the other clones, Tyger, Extang, TonnoPro, Lund, etc, only have the front and rear points. Might make it a little more secure.
But you mentioned an update to come I don't see. Maybe it's mixed in somewhere.
How's the DNA tonneau working out?
It's been great! Just switched to Diamond Back Covers, but the DNA was holding up good.
Any idea on whether or not these would work on the 2022 Tacoma Off-Road Dual Cab w/ Short Bed?
I have the same question work on 2022?
Appreciate the videos. I’m trying to decide between the two. Which do you feel is higher quality, better made and fits best? This one is cheaper but do you feel the Rough Country is better despite the price?
If you aren’t doing a rooftop tent then I prefer the Rough Country. Easier to open and close.
Has anybody installed this cover on a 2021 Tacoma short bed?
Any issues with water getting in?
Alittle around the foam parts on the hinges, but not enough to be concerned with.
Did you not like the rough country one?
Love the Rough Country, still have it, just needed something sturdier to run a rooftop tent on.
@@GearKnowHow Ok, which one did you go with for that? I’m actually thinking the same thing.
@@stevenpassow If you do RTT then you have to go with the DNA Motoring
Did it come with the bed rail bracket?
No
Mine didn’t come with aluminum plate, t nuts, or bolts. Can’t get it mounted to my Tacoma.
Mine just got here without the hardware too. What did you end up doing?
How has it held up?
It’s been great! Just switched it out for a DiamondBack SE though as an upgrade.
Nice video and I appreciate you pointing out early on that it's "Made in China". I choose not to support China as must as possible so this option is out for me.
Rough country low profile tonneau cover or a diamondback SE are awesome choices then for made in the USA.
@@GearKnowHow I appreciate the recommendations. I'm kind of leaning toward the Bakflip MX4 or Fibermax.
Good luck. I try to avoid Chinese items. But it’s hard to do.