I didn’t realize preformed back powder charges are available for pistols! I grew up with measured powder charges, which was a mess to deal with. This is opening new purchasing options. 😉
I agree. Minimal experience with black powder. My dad loved the stuff. Could hit targets readily to one hundred yards. This would be nice to keep as a backup defense weapon as no laws prohibit ANYONE from owning them unlike other firearms.
The cows expressions at the end 😂 seem to be asking: "So whatcha doin' there, human? What's all that ruckus 🤨" Really interesting (but slow) reloading process 👍
Balles en 454 + bourre + Poudre noire en poudre et un peu de graisse pour éviter les départs imprévus dans une chambre du barillet. Voilà ce que j'utilise dans mes remington 1858 et colt 1862 et 1851. Jai le même que celui-ci et j'utilise ce que je viens de dire. Dans la vidéo le balles ont l'air trop petites.
Pyrodex does not chain fire, and the balls were crimped in. Caps are sure lock. Modern powder gun guys. Pay attention. Your life mite need to depend on it
Pyrodex does chainfire when balls don't seal correctly. If a primer can ignite pyrodex so will hot flames and gasses from another cylinder. Your life may depend on it
@@Jesuslovesyou929 Pyrodex does chain fire, don't say stuff online when you don't know what the hell you're talking about. It's less likely to than real gunpowder, but it does happen. And those balls were not crimped in. The chamber is the same diameter all the way through. That lead just plopped in there with room to spare dude.
Even with a good seat of the ball I had mine chain fire, was using Pyrodex as well. I take bore butter and run over the end cylinder to stop that, I watched something one time they explained why we have to use a bore butter or similar substance for chain firing and the diameter of the ball used now days is smaller than the original ball sizes used when these pistols were in service.
Actually on these piettas, the engraving was done by laser engraving I beleive. They are not hand engraved as in the engravings you can see the etch marks. I have the same identical revolver.
Сильно проваливаешь пистолет вниз при нажатии на спуск. По причине боязни и ожидания выстрела и его отдачи. Отлично выдно на последнем, 6 выстреле. Есть над чем поработать. Респект. 😊
in what real life situation would you need more than one or two revolvers anyway? in practice instead of carrying multiple revolvers you just bring multiple people with you.
@@dolsopolartraveling in that time was pretty dangerous actually. You could have been attacked by outlaws on the way. Bringing a few more men with you is much more expensive than carrying extra one or two revolvers. This is why dual wielding revolvers were a thing in the past because revolvers took a lot of time reload they carried two or three for that reason
I've been familiarizing myself with all kinds of firearms for the past 16 years, including black powder ones; yet this is legit the first time I see a molded, cylindrical black powder pellet 😲 Since when has that been a thing??
That is some really clean engraving on the gun. And today I learned that pre-formed black powder charges are a thing. Sadly, it doesn't seem to make the reloading go much faster...
Get rid of those pellets, and use loose powder. A near chamber full, maybe 1/8" -1/4" below the top of the cylinder, of Pyrodex RS or P works great in revolvers. Real black is also an option, but that is not as easily attainable for a lot of folks. Some shooters swear by Hodgdon 777, and it is fine also in revolvers. Not so great in side locks, as it does not ignite as easily. Then get a .454 or .457 round ball, those undersized balls falling into the chamber was scary, and they are in no way engaging the rifling. I smear lube, shortening mixed with beeswax, over the ball. Some prefer over powder wads, but I get the best results by using the method described. A full load or pyrodex will give you 850 fps if compressed tightly at loading. That is a real world result over the chrono using that shortened barrel and a proper sized round ball.
Love the cows in the end of the clips also that ol gun criminals can own at home n used in self defense stand your ground law because it's considered antique
Three things I notice wrong here, one being the pistol is to Shiney to fire on a sunny day. Second is the balls are too loose for the cylinder, they should shave a ring . Third is no lube over the ball. The balls need lube so the barrel gets lubricated and doesn't leave lead fouling in the rifling...
Love the old cap and ball revolvers , bought an old colt .36 cal after Nam at a gun show in Ft Worth and it was extremely accurate. I really like this Marshall revolver and it's a beautiful gun but, like many the engraving is unnecessary... Love your video
A Very Cool Gun To Display (Probably Limited Edition) Still People Probably Won't Buy This To Use In A Fight But Maybe Collection Or A One Time Shooting/Standoff Would Be Used
Very nice pistol. You might consider slightly larger round balls. Ideally they should shave a lead ring off when rammed in the cylinder to get optimal performance.
That ball doesn't seem to have the tightest fit in the world Yes you ain't gunna chainfire with that typa propellant. But you obviously still want that shit niiice and tight
Tus manos delatan querés muy nervioso y cuidado con los nervios ,son fuerte en tu vida 2024 , están buenas tus armas pero no debes matar a nadie saludos desde ,chile octubre 😮
A beautiful weapon...just a simple question: Can the cylinder be replaced with a cartridge cylinder? If so, the cartridge that can be used is a black powder cartridge, or can white powder ammunition be used?
Револьвер выглядит очень недорого, хром и золото выглядят неказисто на нем, равно как и надписи современным шрифтом. По поводу зарядки тоже есть момент, где пыжи и свиной жир? Я понимаю, что возможно этот Порох выгорает полностью и оставляет крайне мало нагара (хотя с pyrodex другая история, там он все же есть), но пыжи для обтюрации пули не помешали) Автор представил лайфхак самой быстрой и незапарной зарядки, поэтому будет думать в этом направлении)
Colonel: soldier war is over what's your status
Soldier: reloading sir!!!
It's a cap and ball black powder single action revolver. Tactical was never a option.
I’m not a black powder guy, so I found this vid fascinating. I never knew there was such a thing as preformed black powder cylinders.
I didn’t realize preformed back powder charges are available for pistols! I grew up with measured powder charges, which was a mess to deal with. This is opening new purchasing options. 😉
I didn’t know about it either, but that’s certainly more convenient than loose powder.
I agree. Minimal experience with black powder. My dad loved the stuff. Could hit targets readily to one hundred yards. This would be nice to keep as a backup defense weapon as no laws prohibit ANYONE from owning them unlike other firearms.
@@Raftjumper07I absolutely agree
It's a modern thing. It did not exist in period
The cows expressions at the end 😂 seem to be asking: "So whatcha doin' there, human? What's all that ruckus 🤨" Really interesting (but slow) reloading process 👍
It's a nice gun, I'll give you that. But the engraving gives you no tactical advantage whatsoever.
Wow man that metal gear reference makes me happy
Do you think that’s why they did it? 🥸
...it makes the gun look purdy, though, Arthur.😅
It gives you street cred
DAMMIT HE BEAT ME TOO IT
You need a bigger Dia ball.. should have a lead ring after pushing ball into cylinder.. im thinking. .454
I was thinking the same thing
Yup, his 44 balls are one size down from what a Pietta actually likes to take.
Other than that great gun.
MOO!
Balles en 454 + bourre + Poudre noire en poudre et un peu de graisse pour éviter les départs imprévus dans une chambre du barillet.
Yep
Came to say this, loose balls give me the heebeejeebees...
Balles en 454 + bourre + Poudre noire en poudre et un peu de graisse pour éviter les départs imprévus dans une chambre du barillet. Voilà ce que j'utilise dans mes remington 1858 et colt 1862 et 1851. Jai le même que celui-ci et j'utilise ce que je viens de dire. Dans la vidéo le balles ont l'air trop petites.
1865: "We will win this war, just you wait. I just need to reload!"
2024: "I'm done reloading! Wait, where am I? Who am I?"
🤦🏻♂️
Dumbest comment ive seen today...if you know what your doin,,it doesn't take that long ya dipstick
Black powder guns are great.
If the balls are just falling into the cylinder they are WAY too small. Those do not look like .454 round balls.
Pyrodex falling in...the balls had to be crimped in
Your life may depend on it.
Undersized balls will allow chainfire and wont seal against the rifling causing loss in velocity and accuracy. Your life might depend on it
@@Jesuslovesyou929At least two of the balls just FELL in.
@@Jesuslovesyou929Stop telling this lie Pyrodex will indeed chain fire, what you're preaching could get somebody hurt that doesn't know any better.
You're getting zero resistance and no lead ring when seating each ball. You will get a chain fire and damage the gun
Pyrodex does not chain fire, and the balls were crimped in. Caps are sure lock. Modern powder gun guys. Pay attention. Your life mite need to depend on it
Pyrodex does chainfire when balls don't seal correctly. If a primer can ignite pyrodex so will hot flames and gasses from another cylinder. Your life may depend on it
@@Jesuslovesyou929 Pyrodex does chain fire, don't say stuff online when you don't know what the hell you're talking about. It's less likely to than real gunpowder, but it does happen. And those balls were not crimped in. The chamber is the same diameter all the way through. That lead just plopped in there with room to spare dude.
Even with a good seat of the ball I had mine chain fire, was using Pyrodex as well. I take bore butter and run over the end cylinder to stop that, I watched something one time they explained why we have to use a bore butter or similar substance for chain firing and the diameter of the ball used now days is smaller than the original ball sizes used when these pistols were in service.
Ни одна корова не пострадала!)
This will be my everyday carry
Undersized ball. Novice there
That gun is a piece of art. A lot of work went into the engravings. Nice.
Actually on these piettas, the engraving was done by laser engraving I beleive. They are not hand engraved as in the engravings you can see the etch marks. I have the same identical revolver.
That cow's got better eyelashes than most women😅
Tem msm kkkkkkk
Сильно проваливаешь пистолет вниз при нажатии на спуск. По причине боязни и ожидания выстрела и его отдачи. Отлично выдно на последнем, 6 выстреле. Есть над чем поработать. Респект. 😊
Great video but bigger balls next time to small can cause sparks to fly into the cylinder causing multiple rounds to go off same time
That is a thing of pure beauty
That thing's a work of art
In practice, instead if reloading in fight, you'd take multiple loaded revolvers with you and switch between them as needed.
in what real life situation would you need more than one or two revolvers anyway? in practice instead of carrying multiple revolvers you just bring multiple people with you.
Потом договариваетесь с противником на счёт "Перерыва на кофе и перезарядку"...ну положим с 13.00 до 15.00 😂
@@dolsopolartraveling in that time was pretty dangerous actually. You could have been attacked by outlaws on the way. Bringing a few more men with you is much more expensive than carrying extra one or two revolvers. This is why dual wielding revolvers were a thing in the past because revolvers took a lot of time reload they carried two or three for that reason
Now that is a beautiful weapon.
I've been familiarizing myself with all kinds of firearms for the past 16 years, including black powder ones; yet this is legit the first time I see a molded, cylindrical black powder pellet 😲 Since when has that been a thing??
The glint from the gun will scare them off 😂 but really it's a beautiful piece man.
Moo. 🔥👍🏻🔥 Update: Pietta’s quality remains unmatched.
good old wild west guns, hell yeah
...EXCEPT that "The Wild West" was defined, largely, by cartridge weapons, not the "cap-and-ball" remnants of The Civil War era...
@@ahashdahnagila6884oh I didnt know.. thanks man for explaining!
this is before old west
Эстетическое удовольствие получил, спасибо мужик❤
Very cool! Love the finish and engraving.
That is an absolutely gorgeous revolver. 😍
Beautiful finish on that gun
Engraving looks beautiful
The second I saw the thumbnail I thought of the m1851 wolfsbane from resident evil village.
Nossa. Meu Deus eu nunca vi uma arma tão bonita quanto essa é uma relíquia...parabéns ao dono dela.
Onde que isso é relíquia? Se trata de uma réplica de fabricação moderna.
That is some really clean engraving on the gun.
And today I learned that pre-formed black powder charges are a thing.
Sadly, it doesn't seem to make the reloading go much faster...
Just a masterpiece
Oh, that's a beauty
Remember, charging with your saber is faster than reloading.
Beautiful revolver, the click when you turn the cylinder sounds like music! Too bad, these BP pellets ruin it for me...
Thats a beautiful '51
Desde Bogotá -colombia que arma tan preciosa lo mejor que he visto gracias
This reminds me something that I forget💀💀
he forgor 💀
Get rid of those pellets, and use loose powder. A near chamber full, maybe 1/8" -1/4" below the top of the cylinder, of Pyrodex RS or P works great in revolvers. Real black is also an option, but that is not as easily attainable for a lot of folks. Some shooters swear by Hodgdon 777, and it is fine also in revolvers. Not so great in side locks, as it does not ignite as easily. Then get a .454 or .457 round ball, those undersized balls falling into the chamber was scary, and they are in no way engaging the rifling. I smear lube, shortening mixed with beeswax, over the ball. Some prefer over powder wads, but I get the best results by using the method described. A full load or pyrodex will give you 850 fps if compressed tightly at loading. That is a real world result over the chrono using that shortened barrel and a proper sized round ball.
Beautiful!
What a pretty revolver!😍😍
Love the cows in the end of the clips also that ol gun criminals can own at home n used in self defense stand your ground law because it's considered antique
Absolute beauty.
Очень интересный экземпляр!
Undersized ball and dry cylinders, oh boy ☠️
You lose 10 points for using pyrodex, and additional 5 for using pellets.
And 50 points for undersized balls.
어떻게 옛날 사람들은 저렇게 장전하기 힘든 총으로 전쟁을 했을까... 대단하다
That's why ancient people would have a second gun or a sword in the other hand.
Remember in its time it was the best rechnology available.
Todos usavam o mesmo tipo de arma na época, por isso ninguém ficava em desvantagem.
Beautiful.
"Sir the war ended 6 years ago"
Simply beaty🫰🏻
Classy cap and ball.
*_! WOW.. Beautiful Gun..!_* 🎖️🎩
20's wants her gun back
Three things I notice wrong here, one being the pistol is to Shiney to fire on a sunny day. Second is the balls are too loose for the cylinder, they should shave a ring . Third is no lube over the ball. The balls need lube so the barrel gets lubricated and doesn't leave lead fouling in the rifling...
This must have been hell to do in the heat of battle
It is always faster to switch to your saber than reloading.
Sweet. But how does a 44 caliber bullet get that easy into the hole of the cylinder?
Yup, he is using a 44 balls that are one size down from what a Pietta actually likes to take.
Other than that great gun.
MOO!
Finger off the trigger before firing. Load primers away pointing in a safe direction.
Never seen BP pellets before, nice.
Battle will over while reloding.
Bella come il sole ❤❤❤❤❤❤❤😊😊
"Using a knife is faster than reloading"
Loading....
To make a revolver, put the barrel back on the pepperbox pistol.
"Who wants to shoot this revolver?"
*Raising hands*
"Who wants to reload it?"
*Hands down*
Heaven forbid if you're in a gun fight and need reloading 😂
Love the old cap and ball revolvers , bought an old colt .36 cal after Nam at a gun show in Ft Worth and it was extremely accurate.
I really like this Marshall revolver and it's a beautiful gun but, like many the engraving is unnecessary...
Love your video
Hermoso revolver!!!!!
パーカッションタイプのリボルバーを再現したモデル。弾も発射薬も個別にリローダーで押し込む必要があるという玄人向けなんてあるんですね（流石に火薬はペレット状にしてあるようですが）
Nice gun. I was curious to see if any round balls moved forward in the cylinder under recoil.
That thing is fucken beautiful
He probably shot it once and was like “this takes wayyyy to long to shoot” lol 😂
A Very Cool Gun To Display (Probably Limited Edition) Still People Probably Won't Buy This To Use In A Fight But Maybe Collection Or A One Time Shooting/Standoff Would Be Used
Very nice pistol. You might consider slightly larger round balls. Ideally they should shave a lead ring off when rammed in the cylinder to get optimal performance.
So this is that case less ammunition everybody is talking about.
That ball doesn't seem to have the tightest fit in the world
Yes you ain't gunna chainfire with that typa propellant. But you obviously still want that shit niiice and tight
Yup, he is using a 44 ball that is one size down from what a Pietta actually likes to take.
Other than that great gun.
MOO!
As dope as this is god bless shell casings
Tus manos delatan querés muy nervioso y cuidado con los nervios ,son fuerte en tu vida 2024 , están buenas tus armas pero no debes matar a nadie saludos desde ,chile octubre 😮
Hermosa arma!!😊❤
❤ que belleza!
now, wouldnt you be able to get a modern cartridge conversion cylinder for this one?
Beautiful gun but I don't think the cow was impressed 😁😎🐝
Esa pistola 🔫 para un honorable duelo a muerte
A beautiful weapon...just a simple question: Can the cylinder be replaced with a cartridge cylinder? If so, the cartridge that can be used is a black powder cartridge, or can white powder ammunition be used?
Que hermosura, lastima q aqui en el tercer mundo no vendan estas maravillas
There must be competition of who can reload it fastest.
That's one beautiful revolver how much was that
By the time you reload, the party would be long over 🥴😔
Carregamento bastante perigoso.
Револьвер выглядит очень недорого, хром и золото выглядят неказисто на нем, равно как и надписи современным шрифтом. По поводу зарядки тоже есть момент, где пыжи и свиной жир? Я понимаю, что возможно этот Порох выгорает полностью и оставляет крайне мало нагара (хотя с pyrodex другая история, там он все же есть), но пыжи для обтюрации пули не помешали)
Автор представил лайфхак самой быстрой и незапарной зарядки, поэтому будет думать в этом направлении)
Need to use larger round balls.
Should be a ring of lead and a good seal. Otherwise you risk chain fire.
Ого, вот это отдача!
Dude that shit takes longer to reload than a Wheelock musket
loading 6 individual rounds take longer than loading a single round?? who would have thought!
We've all heard of "fire for effect..." This video is load for effect!
@@dolsopolar its fucking sarcasm pea size brain
Sublime
Nota fan of this brand. Uberti quality is much better
I'm glad I don't need a gun anymore..
*_Sweet._*
Nice gun. But the ball goes in too easy without a ring. That should take a 451. If you don't get a ring, perhaps move up to a 454.
Hermosa arma .una de mis favoritas. .hace muchos años tenía una sin funcionar .la estaba por reparar y me la robaron 😢
Video cuts off before we can hear the reaction. "Mooo bruh mooo"