How do y’all edit y’all’s high strength shaft to fit over the motor input gear without the cartridge so the high strength shaft doesn’t loose grasp of the gear to spin at 3600 rpm?
I wanted to formally ask 4082B if I could use their party popper endgame idea, but could not find any other way to contact the team. Is it okay for me to use it?
hi, our team had a question, after the initial pick up from the cut flex wheels how do you get the discs from those wheels to your hopper I guess you could call it
There is no cartridge, the axle is mounted straight to the motors gear output. The motor runs at 3600 rpm, with the blue cartridge, it divides that by six to get 600 rpm. They simply did not put a cartridge in it, so that is why the fly wheel spins at the speed it does. They essentially just got rid of a lot of complexity with gearing and stuff and just mounted the fly wheel straight to the motor. A good idea I must say. If it’s legal, I’ll hafta use it
Is the string you used allowed for in game use? The team I belong to found a way to launch stuff without pneumatics, but just could find and long string on the vex parts page.
where do you get the thin metal 24t gears? I saw something similar on 210Y's robot reveal for tipping point. Didn't know if you bought them or machined them.
Will u guys have possession problems, it seems that u used reversed intake as an indexer, but won’t it shoot the discs out while u have 4 discs inside and u have to reverse the intake?
Any reason yall do not have tracking wheels, do you plan to redesign and add them? How are you still able to have a very accurate auton, I thought tracking wheels were essential.
I remember Semicolon had a field in the lake back in Change Up. The secret to being elite is practicing in wild locations
This is by far the most midwestern reveal of all time.
Sorry for you guys not being able to go to Moa. Hope to see you at MSU
Secret to their success, practice in a corn field
Please refrain from giving out classified info.
sick drone footage and setting. 10/10 reveal
Thanks! 🌽
4082B back at it again with another cracked bot! Simply too goated
This is every Midwest vex teams dream field
Yessir 🌽 🌽
Cornfield signature when??
OMG I LOVE YPUR VID EAPECIALLY THE CORN IT LOOKS SO GOOD. WHAT IS THE CAD PLS SEND.
yes pls
yes plz
no cad
Goated endgame mech too
Is there a reason you guys opted to build a liner shooter as opposed to a planetary/orbital like the phrogs?
Planetary = fat
@@ericwolf8769 based
@@ericwolf8769 can second this
Ace wants the step by step instructions for this robot
Lego set will be available in summer of 2023 🌽
@@BRobotics-nj6id how much I might have to cop
does your endgame use pistons to launch the nuts or do you just use the tension from the rubber bands and a piston release?
The pistons are for our parking brake
@@BRobotics-nj6id tipping point moment
This robot boutta destroy everyone 😈. If possible, could you please explain why you chose to use cut flex wheels for the floating intake?
Good grip and flex
we do not miss😈
bloopers
Ballin at no cost
How do y’all edit y’all’s high strength shaft to fit over the motor input gear without the cartridge so the high strength shaft doesn’t loose grasp of the gear to spin at 3600 rpm?
Secret 🤫 🤐 🌽
Having reveals in remote locations da move
Indeed! Practicing in remote locations is always necessary🌽🌽🌽
where are your tanks? what psi is the parking brake?
Our tanks are invisible and the parking brake uses 15 psi 🌽
@@BRobotics-nj6id thanks papa nolan 🌽😍🌍
What plastic is on the intake? Is that polycarb? How do you bend it to be precise consistently?
Bend press
It's just frosted polycarbonate. I use a small torch to heat and bend it.
@@ericwolf8769 thanks Eric!
I wanted to formally ask 4082B if I could use their party popper endgame idea, but could not find any other way to contact the team. Is it okay for me to use it?
Go for it friend 🫡🌽🫡
Yo can we get the CAD pls
P.S we love the corn field :)
yes pls
Please
yes please
Here’s a link to a video which breaks down the subsystems of the robot: th-cam.com/video/dQw4w9WgXcQ/w-d-xo.html
Is there a reason for the second smaller wheel behind the flywheel?
hi, our team had a question, after the initial pick up from the cut flex wheels how do you get the discs from those wheels to your hopper I guess you could call it
Refer to 0:50
How do the disks go from the intake, and then get proper up into the flywheel, and is there a piston that shoots it into the flywheel
No pneumatics. Good building
Precision and physics 🌽
just bought a cornfield. cleared the field for the first time.
🌽 🌽 🌽 🤖 🌽 🌽 🌽
can i ask why u guys used stacked flexwheels for the flywheel instead of use 1 wheel and a weight?
what i'm wonder right now is, how tf did they get that field in the middle of a corn field???
Here is a step by step guide: 1. Build field in the middle of an empty field 2. Plant corn 🌽 3. Wait
i really like the string that the robot shot! I didn't know you were allowed to do that :)
Are all those 4" wheels?
Nah
@@ericwolf8769 how do flex wheel be not too big or small
Earth! 🌍
Nope 3.25 omni 🌽
nice bucket hat joey
Thanks 🌽
nice magazine
How do you have the flywheel as 3600 RPM when its direct?
Magic
@@BRobotics-nj6id 🤭🤭🤭
Aint no way they don’t have a motor cartridge
Vex has 72 tooth gears
72:12=6x600 rpm motor
3600 rpm
There is no cartridge, the axle is mounted straight to the motors gear output. The motor runs at 3600 rpm, with the blue cartridge, it divides that by six to get 600 rpm. They simply did not put a cartridge in it, so that is why the fly wheel spins at the speed it does. They essentially just got rid of a lot of complexity with gearing and stuff and just mounted the fly wheel straight to the motor. A good idea I must say. If it’s legal, I’ll hafta use it
cracked
Do you know what the middle wheel of your drivetrain is? We have been looking everywhere on Vex’s website but can’t find it.
Custom built 🌽
swaggiest team alive
😎
You know it 🌽🌽🌽
First!
Accurate
Do you use pneumatics for the strings at the end? if not, how do they work?
Pneumatics is used for the endgame mechanism 🌽
tutorial when
yes
is the indexer just ratcheted to the intakes?
Not ratchet. It is part of the intakes
@@ericwolf8769 wait what how
I am also curious because it works so well
They feed into the bottom of the stack and roll out the shooter with the same rollers
what are the pneumatics in the very back for?
Parking brake
What kind of rubber bands do yall use?
Is the string you used allowed for in game use? The team I belong to found a way to launch stuff without pneumatics, but just could find and long string on the vex parts page.
The string used in this video was changed due to a rule change 🌽 however for the early season this thickness of string was allowed
How do y’all get y’all’s fly wheel to 3600 in such a compact way?
Nevermind. They don’t use a cartridge
Magic 🌽
Great reveal! Keep it up! :)
Who wrote this comment? Not me!
Which one of you pranksters took my account? 🤔
Thanks 🌽
Cad please?
No cad
The Lego set releases in the summer of 2023 🌽
where do you get the thin metal 24t gears? I saw something similar on 210Y's robot reveal for tipping point. Didn't know if you bought them or machined them.
We created the custom low weight 24t gears you cannot buy them this way. 🌽
@@BRobotics-nj6id Ok, Thanks!
filmora?
Yes 👍
Will u guys have possession problems, it seems that u used reversed intake as an indexer, but won’t it shoot the discs out while u have 4 discs inside and u have to reverse the intake?
Just avoid picking up four disks. Haven’t had this issue.
please don’t kill us at mall :(
please don’t kill us at mall :)
how do you get the flywheel to shoot the half court shot with just 1 motor
no cartrige and very low friction
Why do you have a smaller wheel behind the flywheel?
Secret 🤫 🤐 🌽
Bruh how did u connect the flywheel shaft to the motor gear I must know
Magic 🌽
Any reason yall do not have tracking wheels, do you plan to redesign and add them? How are you still able to have a very accurate auton, I thought tracking wheels were essential.
Internal Motor Sensors OP 🌽
How did you build your frisbee grabber
Very carefully. There isn’t a simple answer to this question.
WINNING MALL
This aged poorly 😭
Nice video, thanks :)
Thank you! Check out our new reveal if you haven’t yet!
This makes me want to cry
🥲
Me too 😭
FREEDOM GLADIATORS
EDDY
So epic
omg yall are touching grass
omg we did touch grass for sure
dirt
@@sarakrejcie7450 Sara OP!!!
what is the kind of wheel that between two universal wheel?
The wheel between the omnis is a custom traction wheel.
the fact that u actually put the game field in the middle of a corn land makes me wonder
Anything is possible 🌽
what kind of intake wheels are those???
Flex wheels
Hi! Are you have the 3D model of your robot
We do not have public cad for our robot
DAQUAN APPROVES
thought we were gonna have to scrap the bot. now we dont since daquan approves
The design is very human
Thank you! 🌽
Very easy to use
Indeed! Great build quality translates into a highly functional robot 🌽🤖🌽
what size rope do you use
Thick rope 🌽
why 6m?
6m 🌽
you made my worlds robot ! omg !
noah klein !
Do you have a CAD, just wondering because we are trying to build a similar flywheel (with limited success).
~ 78116A (England)
Currently, we do not have any public CAD of this robot.
🥔
corn
corn
corn
corn
Corn
corn
Sick bot 🔥🔥
🤒 🌽
Cornfield
🌽 🌽 🌽
🔥🔥🔥🔥🔥
Corn weeee
🐠
🌽
0:26 bro I’m bottom right an npc
Ssshhhhhh only corn 🌽
what's wifi? Just an urban legend I suppose. around here it's just robots & corn.
No internet necessary, only corn and robots 🤖 🌽
Corn 🌽
Corn 🌽
Corn 🌽
cORN
Corn 🌽
wanna show some CAD? plsssss
Here’s a link to our video showing the breakdown of the robots subsystems: th-cam.com/video/dQw4w9WgXcQ/w-d-xo.html
Goated
Always 🌽
515R is full of no-lifes
Ya snooze ya loose -515R
furst
Nice bot
Thanks 🌽
🌽
CORN
Corn 🌽
Mid 🗿
🗿🗿🗿
hey! I really want to ask a few questions about your robot, do you have somewhere i can message you in private?
Feel free to hit us up on Instagram!
what pneumatics gun do u use
Are you referring to what we use to fill our pneu tanks?