You think it's possible that this can be the culprit for my steering knuckles rubbing off on the lower control arms when making full turns either side.
Putting a ball joint like that on a vertical load is such a dumb design. These trucks chew through these like candy. MOOG's isn't any good either. The old through-bolt design was simple and just worked. Just get economy brand, lube the threads and plan to replace them regularly.
Ive replaced these 3x is the last 2 months. Finna just run with no front sway bar
It’s been done you’ll just have more body roll
You think it's possible that this can be the culprit for my steering knuckles rubbing off on the lower control arms when making full turns either side.
Is the truck leveled?
@@TruckLifeProductions truck is stock height
@@mopardude707 gotcha and it might be, I know my spindles was rubbing on my lower control arms both sides but my truck is leveled.
@@TruckLifeProductions thanks for replying I'll try that and see 👍
replaced these on my 4runner few months ago
It definitely makes a difference 👍🏻
😍😍😍😍😍😍
Putting a ball joint like that on a vertical load is such a dumb design. These trucks chew through these like candy. MOOG's isn't any good either. The old through-bolt design was simple and just worked. Just get economy brand, lube the threads and plan to replace them regularly.
never fixed mine on my lowered 3rd gen ram 4 door you’ll regret not doing this from experience 😂
Absolutely and it doesn’t take very long to do it either.
You talked 15 min for a 2 min fix. Redneck