My BRAND NEW S&M BMX Bike - IN DEPTH BMX BUILD
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- The wait is FINALLY over and this bike is INCREDIBLE!!
Building my brand new S&M BTM bike with Alienation, Fit, Nowear, and RNC parts!
Save 10% on Fit and S&M while helping me too with the code "BRANT"
Fit Bike Co - fitbikeco.com/?ref=brant
S&M Bikes - www.sandmbikes.com/?ref=brant
I have to give a massive thank you and shout out to @sandmbikes @FitbikecoVideos @parktool @AlienationBMX @KarlHinkley, RNC BMX, Brimstone Bicycles for making this bike possible. It blows my mind that this is even possible and I still feel like I'm dreaming when I think about riding for S&M / Fit. Life is crazy and I appreciate every single one of you watching for helping make it possible just by being here!
Stay tuned because the first ride is coming very very soon!!
00:00 - Sick finished bike montage
01:25 - Seatpost & Seat
02:26 - Fit Headset & S&M Pitchfork
03:58 - Headset Spacing
05:23 - Alienation Vault Stem
07:07 - Stem Prep For Bars
08:28 - BMX ASMR
09:18 - Nowear BMX Bars
13:02 - Bottom Bracket
16:51 - RNC Solid Titanium Cranks
19:12 - Alienation Starship Sprocket
21:28 - Shout Out To Park Tool
23:01 - Brake Cable Guide & Gyro Tabs
25:05 - Alienation Vise Grip Brakes!!!
28:07 - Prepping For Brake Cables
29:54 - Brake Cable Housing
32:44 - Rear Wheel Prep
33:04 - Alienation Rim Strips
34:00 - Alienation Dissent Peg
34:19 - Alienation Prowler Lite Tire
34:44 - Odyssey Key Chain
35:58 - Adjusting Chain Length
40:23 - Installing The Chain
40:51 - Wheel Alignment
41:57 - Brake Spring Tension & Brake Pads
44:09 - Finishing The Brake Cables
47:22 - Odyssey GTX-R Steel Gyro
47:56 - Cutting The Bars
49:06 - S&M Clint Reynolds Grips
49:57 - Sentimental Bar Ends
50:52 - Odyssey Monolever Medium
51:48 - Making Upper Cables & Installing
58:46 - Front Wheel Setup & Installation
59:47 - Fit FAF Front Tire
1:00:03 - Alienation Dissent Peg
1:00:52 - Alienation Foothold Pedals
Thank you for choosing to spend your time watching one of my videos!
If you enjoyed it, let me know in the comments below and if you’re new, please consider subscribing! - bit.ly/Brant_Moore
Join the public Discord - / discord
Just being here is support enough for me, but if you'd like to support the channel directly there are a few ways you can below.
Channel Storefront - moorebmx.myshopify.com/
Become a Member - / @brant_moore
Patreon - / brantmoore
Save 10% on Fit and S&M with the code "BRANT" and make sure to use these links!
Fit Bike Co - fitbikeco.com/?ref=brant
S&M Bikes - www.sandmbikes.com/?ref=brant
Save 15% on the amazing J Walkers Pants and help the channel with the code "BMX" at www.jwalkersapparel.com/?rfsn...
Save 10% on Shadow Riding Gear / Anything from Sparky's with the code "BRANT" at www.sparkysbrands.com/?ref=4o...
Save 25% on CBD products and help the channel by using code "BMX" at www.sagestreettrading.com/ace...
Sponsors - Park Tool, Alienation BMX, S&M Bikes, Fit Bike Co, Brimstone Bicycles, Ride Concepts, Nowear BMX, JWalkers Apparel, Shadow Riding Gear
Audio Only Podcasts/BMX News - anchor.fm/brant-moore
BMX News - bit.ly/bmx-news
BMX For Beginners - bit.ly/bmx-for-beginners
BMX Geometry Basics - bit.ly/bmxgeometrybasics
BMX Tips & Tricks - bit.ly/bmxtips
BMX Brake Guide - bit.ly/bmx-brake-guide
BMX Geometry Explained - bit.ly/bmxgeometry
Talking BMX - bit.ly/talkingbmx
BMX Jams & Events - bit.ly/bmxevents
BMX Games - bit.ly/bmxgames
Rider Spotlight - bit.ly/bmx-spotlight
Lip Lords - bit.ly/liplordsplaylist
Podcast Episodes - bit.ly/bmxpodcast
Trails Series - bit.ly/bmxtrails
New Skatepark Series - bit.ly/spohnranch
If you're local and need bike parts, shop at Brimstone Bicycles in Canal Fulton Ohio!
My Equipment - www.amazon.com/shop/brant_moore
Instagram - / brant_moore
#bmx #bikes - บันเทิง
we're in for a treat! a one hour vid!
With time stamps!!!
@@Brant_Moore yeah with time stamp!
here is my time stamp: @31:50 , you mentioned the cable housing having a "kink" which reminded me, the kink brakes has been "desist"ed.
also, why not oil the cable housing as well? if reducing friction is the name of the game, a little oil would help. i forgot which company makes cable housing that has teflon (or something) coating on the inside of their cable housing.
and this video is by far, of all the "bike build/bike check" ive seen, the the longest and most detailed i've ever watched.
and lucky you on those key chains!!!
In my opinion you are a perfect F-it for S&M because you do you no matter what and that's what S&M bmx is about, staying true to yourself and having fun period. Just my opinion
I really appreciate that man because that's exactly what I do and it feels pretty amazing to think that they wanted to work with me because of that!
@@Brant_Moore It's well deserved bossman
@@Brant_Moore bingo
I keep waiting to see a front brake, we will bring you over to the dark side one day.
Sick bike!!! Congrats on the new ride!
I have a whole front brake bike but I just never seem motivated to ride it for some reason
Bike is a beast! Wish you had the teal handlebars on it. Look freakin sweet if so. But that's me. 🤘🏽😁
So we actually saw when Karl was out here the it was a good thing we didn't try to go with the teal bars. They're two different colors of teal
Hey Brant, how are you diggin your new bikes and being a part of the S&M/F-IT Family??
Hope everything's been going great, man! Super stoked for you! 🤙😝🤙
53:29 you need some park tool up-1,2,3 Utility Pick Set to open the ends of the break housing 👍🚲💨
You're the second person to say that so I think you're right!
Great vid. Sorry I didn’t explain the brake mount design better. But it’s definitely to me an extra bit of detail that shows the quality of the s&m frames I really appreciate! I friggin love my btm.
To be fair its a hard thing to describe in words..haha
Sooooo clean.
Sweet brant
You should try Carbon Grip Paste instead of sanding the stem, it works really well for me!
hell nah
@@Cheesicle_ Grip paste is used all the time on other types of bikes for this exact purpose, BMX is no different.
My next frame or something close from S & M, dope video man. Love the build.
Hell yea, thank you!! If you buy directly from S&M, make sure you use my code to save yourself some money when you buy it!
Dude, that looks fantastic!
Thank you!! I'm so stoked!
Brant, I use a mechanics pick to "ream" out the cable liner before running the cable through. Much better than using an allen key. I use the little orange set from Harbor Freight. It's like $1-2.
Yea but that just makes sense! hahaha That's such a good idea and Park Tool does make a set
Awesome couldn't wait to see this video beautiful bike man congrats again on your new journey with s&m
Thank you!! It's been incredible so far!
Now that is one Rad Rig !
Love all the detail!
What a beautiful build!
I’m in love with this bike you built!!
hoooooooooot ! ❤🔥❤🔥❤🔥
I agree!!!!
Hell yeah! I have an older BTM and absolutely love it
its disgusting... disgustingly beautiful... great build.
Haha thank you!!!
Angled brake mounts are genius
Agreed!!!
Looks awesome ❤
Thank you!!!
Looking sweet brant love the colour sick as hell man 🤟
Damn nice bike Brant, but why are you still struggling to put grips on with a compressor? Just pop them onto the end of the bar and gently pat them on with your palm, usually go in 3 taps or so depending on the rigidity of the grip.
I have never had grips go on easily like that
was waiting on this very smart bike dude a keeper
No doubt about it!!!
I have waited long enough finally
The wait is OVER!!
That's a sweet rig
How do you like the Venus hub vs a BSD revolution? I liked my revolution until it decided not to freecoast every once in awhile. I've had it apart 5000 times. I've tried every trick out there to stop the issues, but I just don't trust it anymore. I've flipped back 3 times now from the hub staying engaged.
it's a beauty man.
Thanks dude!! See ya saturday, unless this is a different Thomas Miller. hahaha
@@Brant_Moore nah, unless you are planning to go to germany ;)
Haha different Thomas Miller!!
I would like to visit one day though
I love the design of your tukubars!
nowear-extreme-rider-apparel.square.site/?ref=brant
If you wanna get some try this link!
@@Brant_Moore, is link down? Wanted to get see how much them bars run but the link was busted.
It appears so but you can go to NowearBMX.com and then go to the shop. And if you decide to buy some you can use the code “BRANT” to save -0%
10%
I dig it, looking good brother. Now I would say use a dab of blue locktite on the gyro tab bolts and have someone tac weld those brake mounts on, which should help stiffen up the brakes slightly. Those brakes are sick with the bearings like the revenge industries brakes from a few years back. I'm glad to see someone has brought back the brakes with bearings!
Tac weld break mounts? Totally defeats the purpose of having removable brake mounts.
If you’re never going to take them off what’s the purpose of them being removable?
@@x88868not really the point is so the frame works for people going brakeless and people being braked, if you're braked why bother having it removable
@@harrydean9723 wow, you're actually serious about that. 🤣
Brant, I started crushing old spoke nipples on the end of brake cables “with a pair of vice grips” to keep the cable ends from fraying. We talked before about the crummy aluminum brake cable tips always falling off. The nipples crush on super strong. Give it a try! I dare you!
That's a good idea for sure. When mine fall off ill have to try it
Duuude you could maybe get s&m to make certain things better for gyro riders.
Gyros clear headtubes. Taller headtube frames can have them drilled a touch lower to save on steerer room.
Dual frame guides. Real good for gyros, just get some removable style dual cable guides and you can keep your cabling really out of the way.
Seat post and brake levers were the transfer over. Or like a headset dust cap if I found a cool one. Seat clamps sre mostly built into frames now so those don't work. Ti bolts could maybe.
new bike looks awesome ! stoked on those new brakes , can you run them as front brakes ?
We’re confident in them working as fronts. I need to check
Hey Brant, is it better to have a 28T sprocket with this frame? I have the BTM XL and I used a 25t and the axle is at the back of the dropout…I haven’t tried to slam it but idk if it would work. Maybe a 28T would make it better bc the 25t made the peg hang off the dropout a bit. Hoping to alleviate that! Thanks for you help.
Nice build. Ain't gonna lie.... a little "green" with jealousy. 😅 again very informative on small hiccups with new builds. Man you kids got it made....🤣🤣 back in the 80's we never had awesome builds like this. Paper routes didn't pay that well....🤣🤣🤣🤣 JK... great content. Got another old guy bmx'er fan.
Hey thank you!! BMX bikes have come a long way since the 80's! The cool factor of the 80's was definitely something amazing though!
@@Brant_Moore yea but functionality is way better now. Nice ride. Waiting to see how it rides for you. Keep up with the great content.😁
Yeah she real nice !! Bout time!! Just not a fan of the bars at all!! But the rest of it is icky!!! S&M!!! Woooowoooo!
Indeed. No disrespect.. every one likes other stuff.. sick bike with out dout..
I appreciate the genuine constructive criticism. It's okay for people not to like something and you both prove it's entirely possible to be respectful about it
Just curious..., Not go for BTM Xl to eliminate all them stem washers?
I don’t mind the spacers at all. That taller head tube on the XL also raises the gyro tabs in a way that gives less room for brake pull
@@Brant_Moore Sure, ok Fairplay.
The color on the regular BTM too. Haha
The whoooole time Brant was setting up the Front End I kept saying to myself relax, it's for better gyro/cable pull! My wife kept telling me off lol! But, but! He could at least get a Stacked Headset Cap!! Wife = Eye Roll 😂
Siick youre making me want to build a bmx. and I'm a dj guy.
No reason you can’t have both!
I also might know a guy who can save you some money off an S&M or Fit!
O! Long johnson
OH LONG DAAAAAAY
I thought cats said meow
@brant are you going to review the new kink desist ll u brake 🤔
Do you grease the seatpost?
Cut them nails 💅🏿!
😎👍🤙
🤘🏼🤘🏼🤘🏼🤘🏼
I wanna know what that beanie is or where u got it from
You need a set of T handle keys. The multi tool wastes so much time and effort
Somehow I've never thought about it that way until you said that. You're absolutely right about how much time it wastes when the t handles are just a better tool for the job
@@Brant_Moore nice build BTW. The brake routing mods are 🔥🔥🔥
Everything on it is dope, except that cheap looking G-Sport hub guard on the front wheel.
What other guard protects that much of the spokes though?
"So many people have been messaging me saying build the BTM!!"
Who would harass you in such a way!? 😅
I WONDER!!! hahahaha
They don’t make the odyssey key chain anymore ?
Nope, you have one? I want it. hahaha
Duude... I tried to adjust my kids brakes on his new bike. Its really hard with the gyro. front wheel wasnt so bad. rear wheel is terrible.
Nice bike idk why people pick wal mart bmx colors
This color matches me so well though
Why don’t you ever cut the fork tube down anymore than one spacer looks so silly in my opinion
I’ve never cut a fork tube and like my trail bike to feel the same as my park bike. I also don’t mind spacers at all
Oh come on, that stem tightening patern will have no effect on a split stem like yours stop being silly 😂😂😂😂
I say it for everyone with a conventional stem cap
Finally
You right!
First!!!! She's a beaut
Thank you!!!! Did you catch your shoutout?!?!
@@Brant_Moore Yes!! thank you so much for that. Am so honoured to have my Odyssey keychain feature in your new bike build or any of your bikes. I wished I kept a few more of them chains for ya future bikes✌🏼
Thanks so much!! I make these last as long as humanly possible so hopefully it’ll last until they finally make more for all of us! Haha
@@Brant_Moore Amen to that!!👍🏻
Damn bro you took soo long to build this? Was expecting more dialed
hahahahaha this bike as it is at Rays at the end could not possibly be more dialed
I’m just fuckn with you! But if their was some profile components it would be more dialed😎
You got me! Haha
U forgot to put on ur training wheels ya big girl