2 years ago I bought a Typhoon F-12, this was like a $1400 purchase where I'm from. It runs like a dream and mitigates recoil like no other shotgun I have fooled around with.
1: - So I shoot soooo many rounds through that gun yesterday 2: - How did you deal with barrel over-heating? 1: - Over-heating of what? 2: - What? 1: - What?
Eric, dude PLEASE, shoot at a 12" steel gong on the meltdowns!!!! I'LL BUY IT AND SEND IT TO YOU. Show the steel on one of the corner cameras and see how many rounds an ar500 steel gong can take over time. It's such a WASTE to just shoot into the ground!!!!!!!!!
@JonesI'm speaking in context of this video. at a distance he could hit reliably in full auto, it would be unsafe. You can buy specific ammo but that would reduce danger but I'm sure they are shooting cheapest bulk ammo for meltdowns. I'm not saying you can't shoot steel with 556 im saying you wouldn't shoot it for a meltdown.
This makes me feel very warm and toasty about my Stern mag conversion for the Bear Creek 9mm upper I just bought, I can't possibly bump fire too many bullets out of that sucker from the looks of it.
@@therideneverends1697 I reload 9mm. I live in California and don't believe in the ammo background checks. So I buy my brass,, primer, powder and everything else online. I bought a relaod press and just make my own ammo
"Our muzzle device has let go" About 10 mags ago, I didn't even notice it falling off until I was looking at the gun like "Wasn't it like half and inch longer?"
I wouldn't say 99% of people, I'd say closer to 90% cause there are 10% of use that shoot a good bit. Will admit I've never shot 7k in one day, but I've cleared 500 rounds max in a single day. But I also dont have any full-autos to burn ammo like that.
@@timelessgamer883 Meh, keep the muzzle downrange to where the bullets will hit the backstop. Personally I think he should demonstrate that in the meltdown videos for the new people to see. Its not easily demonstrated but worth teaching if you have the ability. Explain and let a round chamber on a really hot gun and hold it safely downrange. Now a round slightly out of battery cooking off, thats a little different!
@@mytmousemalibu you have a point about the pointing down range and other basic safety protocol but what I was meaning was out of battery detonation, like you mentioned, which was possible at that point
The bolt doesn’t even have the grooves for the forward assist to interact with. With that bolt the forward assist would not even function to begin with, just for decoration at that point.
spiritof78 the lower is, the upper is from stern. They used a standard A4 receiver. I’m saying the forward assist would do nothing right out of the box, even before breaking.
Most if not all AR9 uppers and bolts don't need a forward assist since there is no locking-lug mechanism and separate bolt if they're blow-back operated. That's why many AR9 builds or complete uppers/rifles use a 'sporter' or 'slick side' type upper receiver with no forward assist. Some manufacturers make them out of standard mil spec upper receivers though, and they have the forward assist, which as you pointed out does nothing. So I guess it depends on what a manufacturer/company keeps on hand.
I have an opinion. Stern probably adapted a typical AR upper to the PCC configuration. Typical for them probably includes the forward assist device. Granted, it isn't functional in this configuration, but if it was converted to a typical AR caliber (.223/5.56mm), the device would be functional, but, as we know, virtually unnecessary.
Kudos to the loaders you guys were intense and having to shoot all those rounds with little interference of that rifle totally awesome that’s the most rounds I’ve seen to date you guys are something else you made my day shoot one-handed yeah I’m keeping this video and showing my friends from San Diego California I’m proud of you guys totally thank you very much for this awesome video!
If you go to about 15 minutes and keep an eye on the muzzle device you can see as it unscrews slowly if you not the notch changing position. Great control on Eric's part. Watching the muzzle against the tree in the background the muzzle stays pretty level while the stock slides up the vest during the burst. I'm mainly interested in the mag adapter. So seeing Eric pulling hard back on the mag as a grip and things running well is a good testament. The upper is pretty badass too.
I love the way he freaks out every time it has a stoppage. I understand getting the mag out and clearing the weapon so it doesn't cook off...it's just funny to watch the ohshit moment unfold. Like he's afraid of it. And all of the stoppages where it never got a round off was because he slammed the mag into it and you can see the first round pop up.
Yup. It also didnt help when he was fiddling with the first round with his finger. He could habe easily just angled the rifle slightly left when loading the mag and see the angle of the round. This is why pistol mags ARE FOR PISTOLS!
@@Dr.Ballsonya I've had several issues...from squib rounds to belt fed runaways. The key to not getting hurt is keeping your cool. Have YOU ever tried to break a belt with one hand while trying to keep control of the weapon?
Fantastic video, as usual. I've been subscribed to your, Hickok45, demoranch, Brandon Herrera, donut operator, and a few other peers of the pyew for over two decades now. Informative, entertaining, and appreciated. Stay frosty Eric. Pro Patria, hooah
These are the type of videos I wish that weapons corporations would make public, this is the type of thing you can only read about or you only get short clips of, thanks for the great video Iraqveteran8888!
@@KingOfHell94 - I was figuring about .30 and it was mentioned 7K worth of ammo. Sorry I did not know you could get 9mm for for .13! I'm used to 45 ACP guess I should've checked first. Only $910 which is not too bad.
Forward assists are excellent at only ONE thing.... bruising your palm. Thanks guys absolutely amazing! How bout a superlative bleed off piston setup with an hbar?
I think there is a new horror movie character here where the “Jason” character never runs out of ammo, the only way to defeat him is to dodge his fire until the gun fails.
This video validates my love for my 3.1" barreled 9mm ar lol. I absolutely love the thing. It doesnt even have a handguard, just a big barrel nut, and the magwell as a grip. Its the funkiest looking thing. Uses colt smg mags.
This as well as all your videos are great! Very good product reviews and no bullshit lingo. I thoroughly enjoy watching y’all and the content y’all bring. Keep up the amazing work!
I WISH I could do things like this! It looks so fun, it's entertaining as heck just to watch, and dare I say even educational! Thank yall for making this channel! Live every video I've seen
that was the craziest meltdown I've seen! absolutely loved every round of it. lol thanks for the great content gents. looking forward to lots more from the channel!
That would be asking too much of anyone. A G3 or G3 clone on full auto is a very unpleasant and painful experience. I can't imagine anyone wanting to shoot dozens of magazines of 7.62x51NATO on full auto.
Ian and Karl at inrangeTV/Forgotten Weapons finally convinced me that ARs are better off without Forward Assists. And I guess this is a good example of a reason why it can be more harm than help!
This is awesome. Can you do another Meltdown of an AR9 using the CMMG endomags on this platform? See how many ejections until the plastic ejector is destroyed off the mag.
I was at 2:20 seconds in then in my head thought less talking more shooting..... then pause this video to type this comment in and realize it is 44 minutes long
i started this video, watched for a while after he started shooting, left it playing and walked out of the room to do a few things, made my mother a cup of tea and made myself dinner, watched a round of Jeopardy from one commercial break to the next with her, and the entire time i was hearing these mags being dumped one after another from my computer room...i came back a few minutes later and Eric is still firing away and the video isn't halfway done. that's just amazing.
If you guys ever want someone to fill in for you guys so you don’t have to shoot all those rounds I’d be happy to help you out. Great videos keep up the good work
I really want to see the pile of spent brass after this.
Joshua Davis you took the words right out my mouth like word for word😂😂
i was literally just going to type this.
I wanna see all the damn bullet that’s are in the ground lol
just think "hot shots moment" :-D
Amen, show us the brass pile :)
Cool Guy: Hey Eric I shoot about 2000 rounds of 9mm a year. How about you?
Eric: I shot 7000 rounds yesterday.
What are you talking about Eric is the cool guy
Alex Ernst he is THE cool guy
Lmao😂
Im gonna go switch the laundry let me know if i miss something
@@ekimcon8829 Lmao me too!
Oh so this is why I can’t buy ammo for my glock this month...
Blacksmith8rock straight facts
😂
No you can't buy ammo for your glock this month because you didn't think to buy when it was more plentiful. Had you bought then, you'd have ammo now.
itdoesn't makeSense that was posted 4 months ago smart ass 🙃
itdoesn't makeSense boy do you look dumb😂😑🤦♂️
Wife: he’s probably out cheating
Me: ( listening to 30 mins of straight gun shots)
More like 45 minutes, but that was funny
Me watching at 2x speed 👁👁
Lol, do you go to a hotel to watch this video?
Me: listens to 40 minutes of gunshots sitting next to my wife
I wonder what’s more scary to hear while in the woods by yourself. The gunshots or the loud breathing from that bulletproof Jason mask 😂😂😂
Thaiwanese Special Forces.
A banjo
Both
Wokes spouting off their made-up pronouns in between singing rounds of Kumbaya.
Some cult burning people alive. Or at the receiving end of this
I'm glad you had a trijicon on it so you could be accurate.
I wanna see if it held its Zero.
According to Call of Duty, just having it on raises the accuracy stat by about 1%
Heat sink.
@@vector6977 it definitely did hold its zero
Meltdown 12gauge?
Edit: this is a serious suggestion.
I just bought an omega arms AR-12, I would love to see one melted down!
Probably would be their most expensive meltdown if the gun broke down.. but i still wanna see it 😈
2 years ago I bought a Typhoon F-12, this was like a $1400 purchase where I'm from. It runs like a dream and mitigates recoil like no other shotgun I have fooled around with.
@@martindrengenxbox360 $1400??? Holy shit man. I got my MKA 1919 Match Pro for $500 haha
@@Spike-13 Yeah I envy the American market :/
Edit: it isn't unusual that a regular boring ass Glock is like $1k'ish.
Most action movies dont even have this much machine gun firing absolutely loved every second of this video 👍👍👍
Except you posted this 20mins after a 45min video went live. 🤣🤣🤣
@@StarSwarm. and I'm just finishing it now 👍👍👍
@c: Methods in 9mm thatd be pretty cool
1: - So I shoot soooo many rounds through that gun yesterday
2: - How did you deal with barrel over-heating?
1: - Over-heating of what?
2: - What?
1: - What?
What does this mean? Is it a play on the four inch short barrel? Or the muzzle device falling off? I don't get it
@@neroaugustus5378 neither do I but I still line it
Yeah cuz the barrels so short. I get it
That is funny shit
Gun: Completely stops functioning.
Eric: *slaps gun against table
“Am I a joke to you?”
Gun: functions for 1000 more rounds.
😂😂😂😂😂
It always brings joy to my life when I see Eric in the gimp mask.
Just needs a ball gag sticker on the front to make it complete
Bradley Smith and Eric needs to do a 12g 870 melt down video to make it complete!
kcimb he needs a shoulder pad for that... ow
Bring out the battle gimp.
@iraqveteran8888 BATTLE GIMP
you need a sound counter on screen for this showing round count as you go
Mandatory.
That would be great! Hopefully iv8888 sees this and does it
Mark that would be awesome!
and some soft target to see result of all that lead hail
Yes, and like someone else wrote, some kind of soft target down range on a split screen
I live in a small one bedroom flat and I can say without doubt my neighbours love Eric’s meltdown videos too...
Everyone loves it. Especially when you hook your phone up to the speakers
Lmaoooo
@@jaksahn3370 Grab your speakers, put it in a Chicago hood and a bunch of dudes run out of their homes with glocks in hand
@@L85A2 you have provoked a gang war
The way he clears those malfunctions you can tell he's seen some bullshit.
Well he is an "Iraq veteran"👀
I think after all of these meltdowns, Eric might have the highest round count in human history
Prolly
I’d say that record is held by a m134 minigun Gunner
Flash hider falls off
1,000 rounds later: Our muzzle device has let go
The best part that it just blobbes off
Oh shit, oh shit. Lol
Lmao
That was a cool moment. I've watched plenty of melt down videos, but I've never seen that happen before.
🤣
I love your channel. You guys were with me every step of the way when i was going threw chemo. Thank you very much!!!!
Seth I know the feeling!!
Hope all is well now
Hope you're all clear Seth. Good luck to ya man!!
Get well soon seth. I hope all is good with you.
Stay strong brother I wish you the best. 🙏🏽
Eric, dude PLEASE, shoot at a 12" steel gong on the meltdowns!!!! I'LL BUY IT AND SEND IT TO YOU. Show the steel on one of the corner cameras and see how many rounds an ar500 steel gong can take over time. It's such a WASTE to just shoot into the ground!!!!!!!!!
Maybe with 9mm but with 556 this is a huge no no.
It would take every 9mm out there
9mm will never kill ar500
Liam McCarthy false.
@JonesI'm speaking in context of this video. at a distance he could hit reliably in full auto, it would be unsafe. You can buy specific ammo but that would reduce danger but I'm sure they are shooting cheapest bulk ammo for meltdowns. I'm not saying you can't shoot steel with 556 im saying you wouldn't shoot it for a meltdown.
This makes me feel very warm and toasty about my Stern mag conversion for the Bear Creek 9mm upper I just bought, I can't possibly bump fire too many bullets out of that sucker from the looks of it.
This why ammunition price are so high. They running out 😂
Ha, 8 months ago you did still laugh about this
Local reloaders had Party of the Year after this test was completed.
Lol. He reloads.
why would you reload 9mm
I reload but not 9mm
Better off reloading duece dueces!
Ahahaha!!!
@@therideneverends1697 I reload 9mm. I live in California and don't believe in the ammo background checks. So I buy my brass,, primer, powder and everything else online. I bought a relaod press and just make my own ammo
i want to see behind the scenes where they load the mags as fast as you empty them.
deucedeuce22oz already exists, its called Uplula
watch on 2x speed and suddenly the submachinegun has 2,000 rpm rate of fire and Eric has a meth problem.
💀💀💀
😂😂😂
Toki -EJ1 underrated comment -
Right at 6:00 had me laughing pretty bad at 2x
@@nitrodasnipaz9392 6:54
The sheer panic you see after each failure really explains the importance of the open bolt design 🤣
it's not broken and he didn't repair it with the oil 3 in 1
"Our muzzle device has let go" About 10 mags ago, I didn't even notice it falling off until I was looking at the gun like "Wasn't it like half and inch longer?"
25:15 when the magazine was empty, a shell casing stayed in the chamber and it only fell out because he tilted the gun while picking up another mag.
Funk not the only one who saw that I see.
It would fell out of the mag well I think.
Looked away at the wrong time. I hoped someone else caught that.
Saw that too.
Good eye..
This is an accurate representation of me when I get too drunk playing call of duty.
Empty map, no bots… just shooting at a wall. Not even on BO1 firing range
17:00 the flash suppressor falls off lol
I wonder if it backed off from the heat and vibration or if the threads failed.
I noticed from 10min on you can see it Turning 😂
@@bansheemania1692 good eye! I guess it isn't installed with a crush washer.
Yeah you can see it backing itself off especially at the last 20 secs before 16:57 if you watch the notches in it you can see their turning
@@Jrhoney Or it could be the 1800 degree barrel?
WAIT! I'm here from the future, you're gonna want to save that ammo!
16:58 when you put enough rounds through a pdw and the flash hider actually hides hahahah
that's what I've noticed too
When you shoot 1000 times more full auto in 45 minutes than 99% of people will shoot in their whole lives
God bless america 🇺🇸
Godddddddddd bless Americaaaaaaaaaaa EVERYONE HAS A GUUUUUUUUUUN YOU COULD BE SHOTTTTTTTT
@Dill Rogerz What? :)
@Dill Rogerz lol idk?
I wouldn't say 99% of people, I'd say closer to 90% cause there are 10% of use that shoot a good bit. Will admit I've never shot 7k in one day, but I've cleared 500 rounds max in a single day. But I also dont have any full-autos to burn ammo like that.
What if a gun rifle can shoot out more then a million ammo without over heats? That's the world record but no rifle can get that much.
SO lucky a round didn't strike that muzzle device as it came off.
Which would have did nothing lol
It happened on a previous meltdown video as well :P
@Stephen wdym? You could get hit by shrapnels
@@LinkinPark4Ever1996 not gonna do anything
its like a circumcised ar-15
Lol
@Big Glocks So the LVOA would be considered intact? Lol
The doctor cut it a little low
@Big Glocks
It's not the size of the boat......
At least that's what I've been telling myself
This is one of the best comment threads on iv88s channel, hands down.
Ah yes, this is me leveling "recoil control" in tarkov...
When you put it to 2x speed it sounds like a vector.
Good call.
SomeguynamedMatt 😂😂😂haha that one made me laugh
@@someguynamedmatt2907 dude I feel that
0.25=demon alien.
@@someguynamedmatt2907 rip to all the shitty cars
18:24 first time ive ever heard Eric cuss..... I salute you my dude, it was a good run
Of you've ever had rounds cook off in a weapon you'd understand his reaction is an understatement
I was expecting an F bomb lol, I've heard him say shit before
He hath used a word of curse!
@@timelessgamer883 Meh, keep the muzzle downrange to where the bullets will hit the backstop. Personally I think he should demonstrate that in the meltdown videos for the new people to see. Its not easily demonstrated but worth teaching if you have the ability.
Explain and let a round chamber on a really hot gun and hold it safely downrange.
Now a round slightly out of battery cooking off, thats a little different!
@@mytmousemalibu you have a point about the pointing down range and other basic safety protocol but what I was meaning was out of battery detonation, like you mentioned, which was possible at that point
The bolt doesn’t even have the grooves for the forward assist to interact with.
With that bolt the forward assist would not even function to begin with, just for decoration at that point.
Its a conversion that uses a standard AR upper.
spiritof78 the lower is, the upper is from stern. They used a standard A4 receiver. I’m saying the forward assist would do nothing right out of the box, even before breaking.
My grizzly lar upper doesnt have one.
Most if not all AR9 uppers and bolts don't need a forward assist since there is no locking-lug mechanism and separate bolt if they're blow-back operated. That's why many AR9 builds or complete uppers/rifles use a 'sporter' or 'slick side' type upper receiver with no forward assist. Some manufacturers make them out of standard mil spec upper receivers though, and they have the forward assist, which as you pointed out does nothing. So I guess it depends on what a manufacturer/company keeps on hand.
I have an opinion. Stern probably adapted a typical AR upper to the PCC configuration. Typical for them probably includes the forward assist device. Granted, it isn't functional in this configuration, but if it was converted to a typical AR caliber (.223/5.56mm), the device would be functional, but, as we know, virtually unnecessary.
Kudos to the loaders you guys were intense and having to shoot all those rounds with little interference of that rifle totally awesome that’s the most rounds I’ve seen to date you guys are something else you made my day shoot one-handed yeah I’m keeping this video and showing my friends from San Diego California I’m proud of you guys totally thank you very much for this awesome video!
If you go to about 15 minutes and keep an eye on the muzzle device you can see as it unscrews slowly if you not the notch changing position. Great control on Eric's part. Watching the muzzle against the tree in the background the muzzle stays pretty level while the stock slides up the vest during the burst. I'm mainly interested in the mag adapter. So seeing Eric pulling hard back on the mag as a grip and things running well is a good testament. The upper is pretty badass too.
16:56
It just falls, doesnt even get blown away and look cool lol
@Adam Williams the muzzle flashhider? are you blind?
Probably unscrewed from the vibrations if I had to guess.
@@pearson935 haha recoil go brrrrrr
@@myusername3689 you can see it unscrewing lol
I've been waiting for another meltdown video so much. Who else?
karl from InRangeTV has a new reason to dislike forward assists.
Pretty sure you could just say karl
@@wierdalien1 i know
@@wierdalien1 Cause there's no other Karl on the planet, right?
@@wierdalien1 his pet name and my personal favorite name for the forward assist........the "Jam Enhancer" 🤣🤣🤣
"What did we learn from this video?" I learned that I need to buy this thing. lol
I love how this is perfectly timed when you hit the fast forward button!!!
Non stop action!!!
Nah, .5 speed
I love the way he freaks out every time it has a stoppage. I understand getting the mag out and clearing the weapon so it doesn't cook off...it's just funny to watch the ohshit moment unfold. Like he's afraid of it.
And all of the stoppages where it never got a round off was because he slammed the mag into it and you can see the first round pop up.
Yup. It also didnt help when he was fiddling with the first round with his finger. He could habe easily just angled the rifle slightly left when loading the mag and see the angle of the round.
This is why pistol mags ARE FOR PISTOLS!
If you’ve ever had a catastrophic failure you’d understand the sense of urgency.
@@Dr.Ballsonya I've had several issues...from squib rounds to belt fed
runaways. The key to not getting hurt is keeping your cool. Have YOU ever tried to break a belt with one hand while trying to keep control of the weapon?
@@uniformguy751151 never have. But I reload so I understand the feeling of oh shit something isnt right.
I'll defer to your expirenece
Eric's reaction time to get the live round out of a hot ass chamber is pretty damn amazing
9 min in, finally, “SHES RUNNIN BOYS AND GIRLS!!!” Love it!!!
Fantastic video, as usual. I've been subscribed to your, Hickok45, demoranch, Brandon Herrera, donut operator, and a few other peers of the pyew for over two decades now. Informative, entertaining, and appreciated. Stay frosty Eric. Pro Patria, hooah
One thing I took away from this, I dont have enough magazines for my firearms!!
'enough' is never really enough though lol
Do Firearms companies ever come by to tell you that these tests you do are useful for improving their products?
If I remember right I think he said one did
what is teknoaxe doing here
Awesome
Love to see a bore-cam, before and after, see how that rifling/chamber holds up
Tom Hewitt Yeah this could be 1000x more scientific and a lot less backwoods
Incredible! I don't see why this doesn't have over a million views!
These are the type of videos I wish that weapons corporations would make public, this is the type of thing you can only read about or you only get short clips of, thanks for the great video
Iraqveteran8888!
I'm a Mandalorian. Weapons are part of my religion ...
I am Terran weapons are tools.
Very gay guys.
@@dbelex It’s very gay of you if you don’t like firearms and un-American
@@tenorira you are gay i have spoken
@@craigoliveira7916 that is why you have stretch marks around your lips? you may want to grow a beard
Eric’s pull out game strong rippin them mags out when he has a malf XD
2K worth of ammo dang! Talk about a reloaders dream for brass.
9mm is 0.33$?
@@KingOfHell94 - I was figuring about .30 and it was mentioned 7K worth of ammo. Sorry I did not know you could get 9mm for for .13! I'm used to 45 ACP guess I should've checked first. Only $910 which is not too bad.
@@SwordFighterPKN i'm not american, i dont know any prices, just wanted to know lol :D np
@@KingOfHell94 if you're not reloading or buying bulk, 9mm can easily exceed $0.33 per round.
You can buy reloads online for .17. If you're not afraid to shoot them.
everytime this meltdown video posted, i played this for my lullaby song..very relaxing lol
Forward assists are excellent at only ONE thing.... bruising your palm. Thanks guys absolutely amazing! How bout a superlative bleed off piston setup with an hbar?
I think there is a new horror movie character here where the “Jason” character never runs out of ammo, the only way to defeat him is to dodge his fire until the gun fails.
The Hippie Gunner well i hope Jason is armed with an Anderson
His only weakness is soft magazine springs
A never ending belt fed 9mm PCC!!! HAHAHAHA PURE AWESOMENESS!!!
Love the meltdowns
“Mag ferry” has got to stick on Chad.
This video validates my love for my 3.1" barreled 9mm ar lol. I absolutely love the thing. It doesnt even have a handguard, just a big barrel nut, and the magwell as a grip. Its the funkiest looking thing. Uses colt smg mags.
This as well as all your videos are great! Very good product reviews and no bullshit lingo. I thoroughly enjoy watching y’all and the content y’all bring. Keep up the amazing work!
45min meltdown ..oh sweet baby James...
You know its gonna be epic!
It’s like the Terminator, when you think it’s dead it just keeps coming back for more
As soon as I seen the aluminum muzzle device I'm like "That's falling off!" lol
It fell right off lol
I WISH I could do things like this! It looks so fun, it's entertaining as heck just to watch, and dare I say even educational! Thank yall for making this channel! Live every video I've seen
Love*
Me too bro, me too
"hey, you gonna pick those up?"
Wow, That gun Actually Listens to It's Owner. "Im gunna call it" proceeds to Run Like Butter 😎
@WiffleballTony yes sir.
33:46 the reaction time for the IAD to prevent a cook off impresses me.
What's a cook off...?
What is a cook off?
@@PLAYBOYBLAKK when the round goes off because of hot barrel and(or) bolt but not by the firing pin
@@elpalancas when the round goes off because of hot barrel and(or) bolt but not by the firing pin
Wiwer Lea Da Costa thanks
Every time i was like surely its dead now... And it just kept going. Thats impressive
that was the craziest meltdown I've seen! absolutely loved every round of it. lol thanks for the great content gents. looking forward to lots more from the channel!
Thank you for these meltdown videos. Goes to show how great some of these uppers are.
Iraqveteran8888: “this is going to be a long video”
Me: what how long can it be
Video: 44 mins 58 seconds
Also me: WTF
You: me: this going to be a long video.
Me: this comment format is getting reeeeeally old. It's burnt...the joke is burnt....discard it.
Hes got one on the Faxon 9mm AR that's like 56min long
Can you guys do a roller locked meltdown with a G3 or PTR-91 conversion?
That would be asking too much of anyone. A G3 or G3 clone on full auto is a very unpleasant and painful experience. I can't imagine anyone wanting to shoot dozens of magazines of 7.62x51NATO on full auto.
Ian and Karl at inrangeTV/Forgotten Weapons finally convinced me that ARs are better off without Forward Assists. And I guess this is a good example of a reason why it can be more harm than help!
I saw the 45mins length on this, grabbed a beer & hit play.
Some channels like to do “first mag”. IV8888 does “last mag”
👍🏼🇺🇸🇺🇸🇺🇸👍🏼
I would love a behind the scenes on one of these. The guys loading mags, the berm or whatever your shooting
Nice to do a accuracy test at the start and the end
Awesome AR build, high quality content. This is what TH-cam was meant for. Thanks for making my day brother. 👍🏼
I like how occasionally the last casing exits the gun very leisurely.
This is awesome. Can you do another Meltdown of an AR9 using the CMMG endomags on this platform? See how many ejections until the plastic ejector is destroyed off the mag.
I was at 2:20 seconds in then in my head thought less talking more shooting..... then pause this video to type this comment in and realize it is 44 minutes long
ANOTHER Meltdown??? Merry Christmas!!!!
I want to see you guys do this with a CMMG Banshee 9mm!
Me too. I have two and want to know what fails first.
i started this video, watched for a while after he started shooting, left it playing and walked out of the room to do a few things, made my mother a cup of tea and made myself dinner, watched a round of Jeopardy from one commercial break to the next with her, and the entire time i was hearing these mags being dumped one after another from my computer room...i came back a few minutes later and Eric is still firing away and the video isn't halfway done. that's just amazing.
I like how the selector on full auto says $$$$ 😂🤣🤣👍🏻
Quickest "like smash" ever, before the video even loaded.
If you guys ever want someone to fill in for you guys so you don’t have to shoot all those rounds I’d be happy to help you out. Great videos keep up the good work
Nice try lol
Meltdowns are my favorite series! Still waiting to see a Colt 6920 meltdown!😎
At night I play this video on continues loop to help me sleep. 😴
Simply amazing I loved it thank you all.
It’s disheartening to see the same amount I have in my safe shot so quickly. 😩
I hear ya man lol
I’m going to go grab a glass of cognac and settle back for this one. 🥃
Alcoholic much😂😂😂 9:30a.m.
Maybe he works nights, i get home at 8am and will drink.
Ahhhhhh me bourbon🥃🥃 sweet.
16:56 the muzzle device decides "naw I'm done with this"
Tengu. 😂
I always casually fall asleep to TH-cam videos playing on my tv..... imagine waking up to this lmao
Thank you John's thumbs lol. Really cool video guys, thank you.♡♡♡
I love the $$$$ for full auto. It's true af. This thing was a little tank.
Hitting 2X was probably the best thing I ever did in this video 😂😂👌