Thank you for this very instructive video. There was not three minutes of introduction -- you went straight to the subject, and your delivery was well-thought out, intelligent and erudite. Please keep making more how-to videos . Good job!
Bought this small mutimeter to check whether the coil pack that I purchased to repair my 2 stoke engine was working or not. Not being electrically minded I was not sure what I was doing was correct so unsure the results were correct. This video explained so sicincly the operation of this small device and I now feel confident that I can use this for this purpose and around the house when necessary. Very well done Priest. Excellent ++
DO NOT MEASURE AC VOLTAGE WITH IT! i tried that with the same multimeter just now and there was a big pop and a tiny bit of smoke, im glad i used a surge protector
Mine (exactly the same model) doesn't do the continuity test even in this way. Even directly putting together the 2 leads won't change the reading, which is always "1". I wish they made that clear in the [rpduct description.
When I connect the lead to a battery using ACV 200(I know ACv is not for batteries), it shows a reading. . .Is this somewhat related to mah? With each battery's readings showing just above what the battery spec says on the label...?
for some reason mine keeps showing 1V every time... I am trying to test a battery for ps5 gamepad and on all of them it says 1 under any volt settings, I also tried normal 1.5v fully charged battery, it said 1, then I tried dead battery 1.5v and it said 1 again...
Thank you for this very instructive video. There was not three minutes of introduction -- you went straight to the subject, and your delivery was well-thought out, intelligent and erudite. Please keep making more how-to videos . Good job!
After wading through 4 truly awful videos explaining this multimeter, this is just perfect. Thank you.
Commenting to give credit where credit is due. Yours is exactly what I was looking for. Thank you for the demonstration... so far👍👍👍
Just finding out how to use it. I bought this from Alibaba for 2 bucks a couple months ago. Thank you for the information now I know how to do it.
Very good video I have been given one of these multimeters by my dad and this has given me the information needed keep up the good work
Bought this small mutimeter to check whether the coil pack that I purchased to repair my 2 stoke engine was working or not. Not being electrically minded I was not sure what I was doing was correct so unsure the results were correct. This video explained so sicincly the operation of this small device and I now feel confident that I can use this for this purpose and around the house when necessary. Very well done Priest. Excellent ++
High quality spot on information
I have the same meter. Thanks for the great video
Iv over loaded my fancy meter bcos of certain things I didnt know so thank you for this.
no continuity is actually disappointing, thank you for the review!
Yeah what a joke. I was trying to figure out how to use it for that purpose. Guess I have to buy another one.
Thank you , clear and very good explanation
What is the function of the selector that is in between the buzzer selector and the hFE?
Excellent! Thank you!!
Thank you very much 🙏
oh man, you did a great job here.
Nice video how does it measure the motherboard?
It can test continuity too via diode or resistance test. If theree a short the far left digit will show 1. 0 and up you have continuity.
Can I test car ignition coil? Which catagory /selection I should go for? Cheers
DO NOT MEASURE AC VOLTAGE WITH IT! i tried that with the same multimeter just now and there was a big pop and a tiny bit of smoke, im glad i used a surge protector
Maybe you measure current at that time. Mine was on current mode and what left is the same as yours. Measuring ac voltage is fine.
You need to select 500 ac or 750 ac on youre multimeter not dc its imposible to smoke i measure ac voltage with this and it was ok
I almost got blind with this shit when i measured ac voltage
Thank you!
excellent tutorial thank you
Love Hindi Subtitles On Your Video😅
Mine (exactly the same model) doesn't do the continuity test even in this way. Even directly putting together the 2 leads won't change the reading, which is always "1". I wish they made that clear in the [rpduct description.
When I connect the lead to a battery using ACV 200(I know ACv is not for batteries), it shows a reading. . .Is this somewhat related to mah? With each battery's readings showing just above what the battery spec says on the label...?
Appreciate ur job dear
Nice video, thanks :)
What is the DCA used for? And how do I test a battery mAh with it?
Hey, how do I measure human body resistance to electricity using this tool? Is it possible, is there another way?
Thanks man !
good video priest
最近也買了一個,還不太會用,沒有蜂鳴功能不能立即知道是否通聯,祇能用讀二極體表來看聯通嗎?能用電阻嗎?
Does this multimeter have a fuse? I have the same one and i dont see any fuse?
Thank you
how to use it on continuous groud?
Hi,if I want to measure a normal battery, it shows me the veil 1, does that mean it's broken?
read on battery voltage must be 1.5 v if 1 volt it mean its used
pls help, mine is mis reading, and it will read 001,002.... without even connecting the testing lead
@@alexandernuhu3583 it's a problem with the device, I don't think you can do anything about it
Nice
for some reason mine keeps showing 1V every time... I am trying to test a battery for ps5 gamepad and on all of them it says 1 under any volt settings, I also tried normal 1.5v fully charged battery, it said 1, then I tried dead battery 1.5v and it said 1 again...
Where can I get battery for it
I can't thank you enough
How to test capacitor
In India These Chinese Multimeter 830 D costs around less than 2 Dollars With 9v battery included.
Mine came with the battery, functional one.
Welcome
Здраствуйте. Отлично обзор. Дайте пожалуйста схему. У меня тоже такой мультиметр . Режим прозвонка и омметор не работает. Заранее благодарю Вас.
this multimeter is good enough.
I have DT 830D
No capacitor
هل يمكن ترجمته الى العربية لطفا
how to meassure capacitor using this device?
The dt830 doesnt measure capacitance.