Carb Cleaning and Taller Rear Tires on my John Deere
ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2024
- In this episode, cleaned the carb and installed taller rear tires.
Please consider supporting my work with Venmo Chud327 (8704) or
Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching. - กีฬา
You should make a 4x4 mud mower using 2 transmissions
Would have to fabricate a spindle or king pin setup and use 2 steering column u joints from a car.
Use a rear steer trans axel on it
I love that manual one you showed at the end, can't wait to see what you do with it!
Oh yes, that was the general Lee, it turned out great. Thanks for watching!!
Love the videos keep it up I’m sending a license plate for Maine where I live
first and yes, I need a Maine plate!!! Thanks for the comment!
Your welcome
Awesome video I'm getting a tractor just like your colonel. My son bought from his friend he had It for sale. I needing a tractor with a plow.HE told his friend had a tractor quad tires on it rear end a light bar it for all he want has $ 400.00 . But THANK YOU FOR THE VIDEO
That is awesome!! Thanks for watching!!
Love the videos
great video man. you got the same tire this other you tuber Impossible Mowers has. solid rig.
Very cool and thanks for watching!!
Just got myself a john deere gx335 for free from a friend excited to throw some ag tires on it and do some muddin
I love free and ag tire too. Thanks for watching
Freaking awesome man. I got the golf cart up but not as cool as these bad boys. Love the viddys.
Thanks so much and update, I found a 350 for my S-10 project. I know you would have had it running by now. Thanks for watching!!
You should get Emily a sleeve hitch plow and so you can plow up your garden
Great idea and thanks for watching. Did you see Emily pulling the tiller last year, that worked great too. thanks for watching.
Cool video. The Andrew Camarata self unstucking method was really cool.
I am not sure what his unsticking method is, but I would love a container castle... Thanks for watching!!
I love these videos so much keep up the great work
Will do and thanks so much for watching!!
@@chud327 No problem
Oooh I love to see Charles and the John deeres!
Yep, that was a cool trip. First time out of the state for Charles. I am tempted to take it to the Main Street car show Saturday depending on the weather. Thanks for watching. First time for the wagon too. John has been there and done that.
@@chud327 you definitely should !
Awesome Video! I love me a good modified john deere mud mower!
Me too and thanks so much for watching!!
Awesome!
Thanks so much and thanks for watching!!
i think running narrow tires is better, due to it being such a small trans. And I remember hearing about that trailer on my live a while back. also for that race mower, cut up an engine pulley and trans pulley so you can have a 9 on the front, and get a 2 or 2.5 in the back. and some kind of custom clutch, or just move the stock one back. then even with the gov it will be fast. but without...
Thanks for the advice 👍
My brother got a winch for cristmas. He putting it on his john deere he's building. Was going to put it on zombie but he's not really got enough pulling power or weight for a winch, really. Cool videos
I don't know how I missed this comment, but thanks for watching!!
@@chud327 glad I put it on zombie though
@@Lonniell95 worked great
Great video! Is that John Deere a hydro or gear drive? Great deal on those tires too. You sure have some sweet places to ride, I like that swamp area you were cruising through.
he swapped an mst 206 in a while back
Was born a hydro, but has been converted... Lot of swampy areas on my land during rainy times. That lake area was cool, but a bit sketchy, probably won't go back there. Thanks for watching!!
You should do a mower tour
Will put that on the list and thanks for watching.
We need to get you up here in the north to play in some snow
I would love that, where are you located and thanks for watching.
Hey chud love your videos. I’m building a Murray race mower I have a 2 inch pulley in the rear and soon adding an 8 inch in the front. When I had it running with the 2 inch I would push the clutch in but the belt wouldn’t disengage/lose tension. Do you have any tips on what it could possibly be? Instead of it disengaging the mower would stay in gear and keep going.
Is the belt too short? Hope you figure it out and thanks for watching!!
My first ever mud mower was a aliens! V twin, hydro,
Very cool, you said alien ( probably auto correct) might be a good idea for my next build theme. Thanks for watching!!
Wait till you see it with the monster vampires on it. Wait maybe vampire would be a good theme, video could come out late October...
Is kernel craftsman your favourite
Is the John Deere still a hydro or is the petals and it being a manual just there if it just that the petals maybe you can do a gas petal
he swapped an mst 206 in it
When will we see LT Johnson again
Hopefully soon, he is feeling left out. Thanks for watching!!
👍👍🙏
#TRUEFAN
Always love hearing that!! Thanks as always for watching!!! Those sneak peeks were for you!!
Thanks CHUD! I'd like to see the #TRUEFAN become a real thing for you! @@chud327
hydro?
Originally it was, not it is a manual. Thanks for watching!!
@@chud327love your videos!
@@micahchesler4552 thanks, I love hearing that!!