3D printed RC truck, part 2
ฝัง
- เผยแพร่เมื่อ 7 มี.ค. 2016
- Second part on my RC truck.
Updating/upgrading stuff and running into new problems, as always.
Next video will probably be reworked gearbox and ninjaflex shocks?
I also need to make a body sometime...
If you wish to support this channel, check out these links from Gearbest.com!
Exclusive brand deals:
goo.gl/emiUGs
Creality CR10, Discount code: E3MRP9QFKU
goo.gl/m7bRsQ
Creality CR-10S, Discount code: 9AX1TUIEW2
goo.gl/MKDZbB
Anycubic I3 MEGA(Best printer I've used)
goo.gl/vX6pj9
TEVO Tornado
goo.gl/R64Vcn
TEVO Flash, Discount code: GBFlash
goo.gl/L1vk6i
Creality Ender 3, Discount code: GBEnder3
goo.gl/Ekt4vk
Tronxy X5S, Discount code: GBX5S
goo.gl/9iQ6Dd
JGAURORA A5, Discount code: GBA5719
goo.gl/AgfY12
You can find Gearbests other printer kits with great discounts here:
goo.gl/sJpwkH
Check me out at:
Instagram: / mr.crankyface
3d hubs: www.3dhubs.com/service/crank3d
MyMiniFactory: www.myminifactory.com/users/M...
Thingiverse: www.thingiverse.com/MrCrankyfa...
Youmagine: www.youmagine.com/mrcrankyfac...
Orders/commissions: www.crank3d.se - วิทยาศาสตร์และเทคโนโลยี
Cant wait till the printers car print the battery and motor too. Its all in the Ink selection as a substrate.
за кота отдельный лайк, он просто чудо!))
cool truck you made their
Great project. You could try Loctite to fix the gears to the shafts but it is a one way trip. Only way I know of reversing it is applying heat which isn't going to work well with the plastic. What about a split collar, designed into the side of the gear to clamp onto the shaft? Not sure if you have enough room for this? Or you could try drilling cross holes through the gear & shaft and press in a small pin?
What's the Cats name? I have a great little male Cat, Rusty. Always inquisitive and wanting to be apart of what I am doing.
Love what you are doing, keep up the good work.
Willy
Thanks! I'm pretty sure I did try using superglue on one of those gears as a last resort before tearing it apart for upgrades.. :) The V2 used more hole&pin but it was tedius to make with all the fine drilling and I want this to be easy to make so more people can enjoy it. The V3 I'm currently working on is using printed shafts with push-fit connectors which you then just hold in place with a screw, hence keeping all the torque against bigger surfaces, should cause less stress.
She's named Siri(Not after Apples Siri), very curious but always from a distant haha.
You should check out my new videos, I've made a lot of progress since this V1 truck :)
Nice work ! And your cat is so cute ! ^^
I love your creation,realy cool, LOVE IT :D
cool project and really fast :D
Thanks! Check out the newer vids of it as well, I've done a lot of progress on it since this video was uploaded. :)
Those tires won't do so well if you want it to be like a truck and tow something. But other than that it's so cool!
im in process of printing. had to shorten the frame pieces to fit my printer, hopefully it will still work ok
+James Hunt Nice :) How big print area do you have? For future projects I'm considering making everything max 20x20cm so more people can print them without mods.
+Mr.Crankyface My bed is 225x192. prusa i3. I have also come across another issue. The droppers in the frame for the 4 link are sized so a m4 screw can thread straight in yet the axle end works nicely with m3. Im not sure if this is a printing error my end but ill have to get some different rod ends to solve it,
last thing , the front axle spring mounts dont line up with the chassis, i assume this is so they clear the link arms?
Great project so far its printing and fitting together so well, Good Job!
+James Hunt Ah, good to know :) I checked the dropper issue and the STL seems to have 3.3mm holes for some reason, I must've missed some revision when I uploaded the V1 frame, I'll pay extra attention to this on the V2 frame which is hopefully out soon(It's been super busy lately).
One thing you could do if the hole isn't way too big is to fill with a tiny bit of superglue and let it dry then try to use a M3 again, this has worked for me when the tolerances has been off.
The front axle spring mounts mis-alignment was by accident to be perfectly honest but since it helped clear a bit for the linkages I left it there.
Thanks :) Hopefully the V2 will be even better.
So good. I'm planning on using your front axle assembly to steer my semi truck project!
Nice, would love to see some photos of it when done!
Hello,
Do you sell this chassis and transmission kit?
How much?
Grateful.
Fantastic work, dude. Those things you used to make the suspension, how is it called?
Thanks! Do you mean the linkages? That'd be threaded rod and rodends.
Mr.Crankyface It must be that! :)
it sounded like a monster truck
Por favor amigo vc tem o link para download desse arquivo para baixar? desde já agradeço.
Do you have the stl files for download somewhere?
www.thingiverse.com/MrCrankyface/designs
Dude that is awesome. Nice work.
+onthevirg715 Thanks!
Hey how hard is the whole 3d printing process. I was interested in 1 but it seems like it would be higher skill level then I'm at and would your computer need to be sophisticated Enough to handle printer?
+onthevirg715 I'd say learning how to design your objects is the hard part. I've been teaching myself CAD software for years now and still feel I lack a lot :) You could do 3D printing even with a budget PC or laptop. I recommend getting a printer with SD memory card reader, that way you export your files from PC to a SD card and printer only needs the SD card to print.
Yea that's kinda what I was scared of. I'm not a super high tech kind of person but I def appreciate the tips on the SD card sounds smart anyways. Maybe I'll take it up when I have the time to design something lol but thanks again.
Sorry, I want to know. How much time do you spend in the print part?
For this simple one, probably around 20-30 hours of print time. It's probably around ~30-40 parts.
thank you so much.
can you drift with it
Please friend you have the link to download this file to download? Thank you very much in advance.
Hi!
You can find all my designs and uploads here: www.thingiverse.com/MrCrankyface/designs
This truck comes in three versions, V1, V2 and V3. :)
Thank you very much, friend and congratulations for your videos.
what is the scale ?¿ im interesting to print 1/10 thanks
It's based on tamiya 1:14 but the measurements are pretty much 1:10 of the real TAM-110.
how is the % to do in 1/10 ?¿ because i have a body in 1/10 thanks
From where i can buy it in india ??
You can download all the parts from thingiverse and then go to 3Dhubs.com to find a hub that can print it for you.
ya me suscribi al tuyo 😎 😎 😎 😎 😎
3D print is expensive ?
It depends on what you print and with what material. I tend to mostly use PLA plastic which is cheaper(~20euro per kilogram). This lets you print quite a lot of things at a low cost.
owh okay thanks
I love your creations GREAT !!!!!!
@@MrCrankyface you can get PETG for that price ;)
супер
Tiers* not tyres btw
جيد جدا