Removing rust from a gas tank- Big mistake!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024

ความคิดเห็น • 45

  • @lecobra418
    @lecobra418 หลายเดือนก่อน +13

    Acids such as vinegar work on rust because they're acidic, baking soda is basic and neutralize acids, why would you mix both you're basically wasting products for no results.
    Let it soak in vinegar/acid for several hours, then rince with water and baking soda to stop the reaction, then dry it and fill it to avoid flash rust.
    Electrolysis also works wonders for tank cleaning.

    • @VerzerWorks
      @VerzerWorks  หลายเดือนก่อน

      Thank you! Definitely appreciate your input! I will give this a try on my next project.

    • @AndToTheRepublic4WhichItStands
      @AndToTheRepublic4WhichItStands 12 วันที่ผ่านมา

      Clr works the best bc it won't eat the metal too and make a bunch of pinholes...

  • @harrison298
    @harrison298 3 หลายเดือนก่อน +30

    I've tried all the different acid soak methods, and while they do work, nothing beats Evapo-rust. That product is amazing. And it only dissolves rust, not the actual steel, so it won't make any pinholes worse.

    • @tea4me324
      @tea4me324 3 หลายเดือนก่อน +3

      There’s a rustolum equivalent that’s equality as good too.

    • @VerzerWorks
      @VerzerWorks  3 หลายเดือนก่อน +3

      Thank you! I will have to give that a try!

    • @koondiks
      @koondiks 8 วันที่ผ่านมา

      Can you explain the process using it

  • @gavinnance4475
    @gavinnance4475 2 หลายเดือนก่อน +4

    just cleaned and sealed my tank with kbs tank sealer kit, nothing tough about it! had a few rinse on the clean, blasted the rust with the acid zinc, blew it dry, stirred the coating and rolled it around! looks real nice!

    • @VerzerWorks
      @VerzerWorks  2 หลายเดือนก่อน

      Nice! I will have to give that a try. Thank you!

  • @themannmitchell
    @themannmitchell 3 หลายเดือนก่อน +4

    Muriatic acid and baking soda to neutralize works instantly and gets all the chunks

    • @VerzerWorks
      @VerzerWorks  3 หลายเดือนก่อน +1

      Thanks for the tip!

  • @Jason-vx4eo
    @Jason-vx4eo ปีที่แล้ว +8

    I use vinegar on rusty parts daily. I have a vat that I use to soak parts. Rinse it with water when your done.

  • @thepoorfreelancer2494
    @thepoorfreelancer2494 3 หลายเดือนก่อน +6

    The baking soda it´s maybe the worst idea if you want to clean a gas tank. The reaction and the gas produced by the baking soda inflates and deform the tank (if the cap is closed)

    • @VerzerWorks
      @VerzerWorks  3 หลายเดือนก่อน

      Good to know! Thank you!

  • @jayyoutube8790
    @jayyoutube8790 ปีที่แล้ว +26

    Vinegar…. Soak it for as long as you can, take it to the quarter car wash and use the high pressure sprayer to get it all out as best you can, as long as you don’t let the tank sit, it won’t rust. You’ll have a week or so.

    • @captainlevonn9318
      @captainlevonn9318 ปีที่แล้ว +3

      rust will come back as long as you rinse it with water i recommend you to just drain the vinegar and let it dry by itself

    • @jayyoutube8790
      @jayyoutube8790 ปีที่แล้ว +8

      @@captainlevonn9318 ok, have you ever extracted rust from a tank? that’s the point of taking it to the car wash. If you do that (let the vinegar dry in there) it’ll continue to rust as it’s an acid. By washing it in water, it’ll neutralize the vinegar and stop the rust. I’ve done this very thing several times, it’s the fastest and most efficient way to get rust out of the tank

    • @muhammadimranahme
      @muhammadimranahme 9 หลายเดือนก่อน +5

      @@jayyoutube8790 after rinse from water wash, you need to neutralize it with baking soda to prevent upcoming rusting from Acetic acid which vinegar have.

    • @MotoJayy
      @MotoJayy 7 หลายเดือนก่อน

      @@muhammadimranahmehow to you do that tho do you add baking soda and water or just baking soda

    • @6vaxN2masks
      @6vaxN2masks 5 หลายเดือนก่อน

      After I wash it with pressure washer, u need to rinse it's again with a gallon of distilled water mixed with baking soda. That last step is what prevents rust (aka neutralizing)

  • @doctorrenegade839
    @doctorrenegade839 หลายเดือนก่อน +2

    Interesting alternative to the traditional science project volcano 🌋 🤔 😂

    • @VerzerWorks
      @VerzerWorks  หลายเดือนก่อน +2

      Ha exactly!

  • @Adriaan-bb6kv
    @Adriaan-bb6kv หลายเดือนก่อน

    Did you got it clean? Did you also throw in a hand full of small stones to shake it in with. Tto like scrubb the inside to get even more rust out?

    • @VerzerWorks
      @VerzerWorks  22 วันที่ผ่านมา

      Yes, it definitely came clean. I did not use stones, but have been told it works. I may try that on the next one!

  • @Adriaan-bb6kv
    @Adriaan-bb6kv หลายเดือนก่อน

    Hey you guys. Someone told me to use normal white vinegar mixed with baking soda. And I also got this reaction. At first then nothing. Now I read here and you say just to use vinegar alone. But okay for howling? 24h just overnight? Longer? Thx

    • @VerzerWorks
      @VerzerWorks  22 วันที่ผ่านมา

      Let it soak at least 24 hours.

  • @Daft_Dhwelk
    @Daft_Dhwelk 11 หลายเดือนก่อน +2

    Well I did hear some CO2 bubbling

  • @AmitUP-tp2kw
    @AmitUP-tp2kw 3 หลายเดือนก่อน

    Explain the process please. Is it just baking soda in water?

    • @VerzerWorks
      @VerzerWorks  3 หลายเดือนก่อน +2

      Baking soda in white vinegar. Let it soak and rinse.

  • @chrismorneau8188
    @chrismorneau8188 หลายเดือนก่อน +1

    Electrolysis

  • @timothywhieldon1971
    @timothywhieldon1971 3 วันที่ผ่านมา

    waste of time and $.

    • @VerzerWorks
      @VerzerWorks  2 วันที่ผ่านมา

      Thank you for watching!

  • @user-ec2to1pj2r
    @user-ec2to1pj2r 4 หลายเดือนก่อน +1

    Just flip it and get the gasoline is empty

    • @VerzerWorks
      @VerzerWorks  3 หลายเดือนก่อน +1

      Thanks!

  • @lanceelliott9752
    @lanceelliott9752 ปีที่แล้ว +7

    A Harley-Davidson you don't have to do that too Hondas Japanese

    • @jayyoutube8790
      @jayyoutube8790 ปีที่แล้ว +8

      Unless they’re plastic, or stainless steel, yes, Harley’s rust just like the rest..

    • @billypater5287
      @billypater5287 ปีที่แล้ว +9

      Just make sure you carry tools wit you on a Harley 😮

    • @lamronnaquavius
      @lamronnaquavius ปีที่แล้ว +3

      @@jayyoutube8790 ya Fr lol my uncle Harley davidson sat for like 15 years and there’s a big ass whole in the gas tank from rust

    • @derrickwoods2803
      @derrickwoods2803 ปีที่แล้ว +1

      Must have been the only thing Harley made that wasnt complete garbage

    • @Cent51
      @Cent51 ปีที่แล้ว +3

      You are a bit wrong dude, all tanks rust..