String Trimmer Tune Up
ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2024
- Performing a full tune-up and replacing the fuel lines on a Troy-Bilt TB525CS 4-cycle string trimmer. I replaced the air filter and spark plug and changed the oil. I also greased the trimmer head gearbox and the flex shaft. I cleaned the carburetor in a separate video ( • String Trimmer Carb Cl... ), which I highly recommend when replacing rotted fuel lines. This procedure can be applied to perform a tune-up on most string trimmers. See the links below for the parts and tools I used:
Trimmer Fuel Line:
amzn.to/3db0zl8 (affiliate*)
Hemostat Locking Forceps:
amzn.to/2Uxik7l (affiliate*)
Trimmer Air Filter:
amzn.to/2THiZSC (affiliate*)
Oil Drain Pan:
amzn.to/3bDAauY (affiliate*)
RDZ4H Spark Plug:
www.ebay.com/i...
Spark Plug Gap Tool:
amzn.to/3bITNlw (affiliate*)
High Temp Grease:
amzn.to/36Ae8b7 (affiliate*)
*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
Trimmer Fuel Line:
amzn.to/3db0zl8 (affiliate*)
Hemostat Locking Forceps:
amzn.to/2Uxik7l (affiliate*)
Trimmer Air Filter:
amzn.to/2THiZSC (affiliate*)
Oil Drain Pan:
amzn.to/3bDAauY (affiliate*)
RDZ4H Spark Plug:
www.ebay.com/itm/264680302658
Spark Plug Gap Tool:
amzn.to/3bITNlw (affiliate*)
High Temp Grease:
amzn.to/36Ae8b7 (affiliate*)
*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
What about the carburetor? Did you consider cleaning that? Why not?
I did end up cleaning the carb in a separate video: th-cam.com/video/G6noZ99bC4U/w-d-xo.html . I should have done it all at the same time because pieces of the old fuel line made it into the carb and, eventually, it started running poorly. Lesson learned. Thanks for watching!
@@Mikeattempts Great! I have the same trimmer. Its been reliable but needs a tuneup.
Yes, I have the same trimmer and is also very reliable. Thanks for making this informative video. Never thought of greasing the spinning shaft.