Great video bro. Thank you very much. I had made some changes and didn't keep track. Long story short the Anzo White Halo would stay on for 10 minutes after truck was off and light would flash every 10 minutes unless I unchecked DRL in settings. I was a lil nervous but finding and watching your video gave me the As Built digits that I didn't backup and showed me every code to every sequence so I could get them done correctly. Can't thank you enough but I did subscribe. Great video my man.
Hey I just watched the video and did the position lamb and turn signal only setting. For some reason my DRL is now the low beam, position lamp, and turn signal. Do you know if something didn’t work or if it’s not possible to only have the position and turn signal? I’m also wanting to brighten up the position lamp but I haven’t gotten to that yet. Any help is appreciated. 2016 F150 Limited with factory LEDs
Just wanted to say thank you for this video. I've watched lots of your forscan stuff. I tried to switch my DRL to fog only using the famous "spreadsheet" but it only lists BCM 726-4501 xxxx 7Fxx xxxx BCM 726-50-01 04xx I added the BCM 726-26-02 x1xx xxxx xxxx and this time it worked. Thank you very much for taking the time to help people. You are Awesome.
Question, I just purchased a 22 F150 that originally came from Canada. It is a lariat package that should have daytime running lights with the new LEDs. Can’t seem to find daytime running lights anywhere. When I go into the system on the big screen, it does not show it as an option. Is there a way to add this as an option?
Hello question will this work with other aftermarket heads that convert halogen to the led? I have the vland headlight and I would like to just have the halos on instead of both the halos and headlights during the day. Thank you for your videos Ricardo!
I have a 15 platinum as well and have the switchback DRLs from Diode Dynamics in and I am trying to figure out how to have the DRL white as the running light with the low beam off. Can’t seem to figure it out.
wich one is the front running amber light not the brigth amber turn (just the regular amber ,there is high and low light on the amber,want the low side) thank you... my truck doesn't have the front led...
Do the DRL operate when the light dial is in the O position (far left, off) or turned all the way right to the A position? I’m considering toying with DRL in FORscan but only if it works when the light switch is off; I don’t want to screw with the auto-lamp feature.
My truck only has an auto-lamp control in settings menu of the gauge cluster. There is no actual DRL setting. Are some trucks devoid of DRL? Seems unusual. I’d really like to set a custom parking-light DRL in FORscan to avoid having to manually switch them on every time I drive the truck. What say you?
Thanks for the video! If I have a 2017 Super duty(halogen), is this the same? I want only turn signal lamps on with my drl’s, nothing else to be on. Thank you!
Hey Ricardo, is there a was to make the Factory Halo white instead of amber? Kind of like those ANZO lights. Are there LED’s or bulbs you can switch for the color? Please let me know. Thanks.
I'm confused at 5:44. Is that what I need to get parking lights only? I tried and now the option doesn't come up in advanced settings. Parking lights are on but so are head lights
I did the values for parklights to be on as drls on my stock led headlights and nothing happened when the knob is in the "auto" position. It instead replaced my lowbeams with park lights to just park lights "only" when on the ON position. Hope you can help me fix this. Ive read somewhere that said they only come on if its in drive idk if its true.
Would the 2020 f150 with tech package have this module? I installed led headlights with DRL leds, and would like to turn on the DRL if that is an option for the XL trim package
Thank you for this. Question, if you don't mind...I have the Anzo switchbacks and went to do the white halo's as DRL's. However, when I went to change BCM 726-26-02 to x1xx I got an invalid checksum error. Any thoughts?
Hi Ricardo. Great video brother. I tried using your settings for “parking lights only” but the low beams still come on when I turn the switch to off. I’m trying to get a set up where I can turn the selector switch to OFF while in gear and be completely dark for when I’m hunting. Do you have the codes for master disable for the DRL’s? I’d appreciate any help you can provide.
i have the alpha rex pro series headlights...will this work the same with my application? i have the drl harness installed. i dont want the low beams to be on during the day. i have a 2018 f150 and no option to turn on or off the drl in the cluster control. i only have the autolamp to select
So when 726-29-02 value is changed to 1, does that turn all the lamps/headlights/fogs to full bright or is it just the running lights? Or is there a way to change all running lights/headlights/fog lamps to bright without having to chose one or the other? I have a 19' f150 with the led's.
Hello! I have a question. I have the same fordf150 as the one in the video. The Daytime lights option does not appear in my car settings (see minute 5:17) I have the forscan. Do you know what code I have to change to make this appear? Thanks for your help :)
I added the auto headlights switch and sensor but they don't come ON in auto. Is there something than needs to be changed with forescan? If you are willing to show me I can compensate for your time. Thanks in advance (2012 F150 RCSB STX)
Is there a way to make the fog lights come automatically with the headlights instead of having to push button every time the truck is started at night?
Right. But my truck has a day/night sensor and automatically turns headlights on/off, with the foglights. Thats the only way i think you can do it. Upgrade the switch to Auto amd add the sensor. 🤷🏻♂️
Ricardo's Workshop mine has automatic headlights too, its a 16 King Ranch. But I’ve noticed that every time I cut the truck off and restart that only the fog lights have to be manually turned on again. It may not be do-able, but if ya look into it and find out let me know or maybe do a video on it. Thanks!
I just want to disable drl completely I bought a Canadian truck but live in the us. I have tried different codes and have not had any luck. Any suggestions? Ty in advance.
Sir.. can you please help me with my f-150 xlt 2018. After I replaced after market led bulbs on to my headlight, the low beam won’t go off when it’s on drive mod even the light switch is off mod. But If I put the truck on park mod, the lights go off. I don’t want to drive with the light on every time. Which fordscan should I use and what do I have to to change.
Hi Mr try. When you say you replaced the aftermarket led bulbs. Do you mean you upgraded to aftermarket LED or replaced the Halogens with OEM LED? If its OEM, it sjould work fine as long as its set correctly in forscan.
@@ricardosworkshop Sorry about the unclear question that I have to you. I m a second owner of a truck f-150 xlt 2018 originally from Canada. I believe that the first owner must changed a few things on the drl of the truck before. Now that I have no daytime running light option to turn on/off in the display setting. First With the factory halogen headlight my truck the headlight was working fine as normal until I replace it to led bulbs. Since then every time when I drive or reverse the truck my headlight low beam just automatic turn on even the light switch is on off. And when I put it on park my headlight low beam would goes off. Now that I replace the old factory halogen headlight to a new one called Morimoto xb 2nd generation and I still have the same problem as when I replace it to led bulbs. I don’t want my headlight low beam and the C shape led light to be on every time I drive as it on off mode. Please share your thought, thanks.
Hi Try, so Canadian vehicles are locked with DRL due to their laws uo there. You would probably have to change this in the IPC. Then you should be able to change to your preference.
Maybe you can help me. You seem to a broader understanding of forscan. Im trying to program DRL in the park light/turn configuration but it keeps blocking me. I currently have the DRL with just the park lighs and it works fine but i cant get the turns on with them. Do have any experence with this. 2017 F150 Lariat.
Ernie, what did you input to get your parking lights only to work? I tried doing it tonight and I could get it. When I put the vehicle in drive nothing was coming on in the headlights.
So for the high beam only do you have to make the changes to all three sections? Do you even have to make the change to the top one of you can activate the drl from the dashboard?
@@ricardosworkshop thank you. I upgraded from factory 17” wheels and tires to factory 20” with 275/55r20 at tires. Do you by chance know how to recalibrate the speedometer?
So I have tried to get just the park lights ( halos only) to work but they wont all I can get is the park and turns to come on. Any ideas what I can do?
Fantastic video man. I got stuck changing mine to disable and couldn’t figure out why. This video explained it. Just do I have it in writing, can you tell me the 3 locations you changed and what the settings would need to be set at for disable? Thanks bro!!
Hi Ricardo, thanks for this and more other helpful videos from you 👍. I programmed and activeed just the daytime running lights on my 2017 F-150 with LED lights. Upon cranking the enigne, lights to AUTO and column shifter to D bingo - DRL are there. Next day another engine start, lights to AUTO and D -> no DRL anymore😳. Any idea? I checked by forscan the values BCM 726-26-02 reps. 45-01 are still there. Thanks for your feedback.
Is there a way to prevent the user from unchecking the box for daytime running lights? Basically always force the running lights be always be on if the vehicle is on? No way the operator can turn them off.
Ricardo's Workshop I’d love to know how! Canada requires the vehicle have daytime running lights on all the time. The issue is with my 2017 f150 it has the option to turn them off. Also if I change the lights from auto to off they turn off...
I believe its in ghe BMC 726-50-01, 017F But checkout the spreadsheet docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit?usp=drivesdk
I hope this fixes my turn signal switch back led issue. My drls should be white but the low voltage drl sent to turn signal makes them go amber and flicker orange. I have to manually turn on park lamps to get the effect I want.
Good Afternoon sir! Great video! I'm actually looking to turn my Alpharex Pro Headlights DRL to STAY on amber as the color vs white. Would you be able to help?
Quick question, If the switch remains in “auto”. Does this mean that when the headlights come on at night it disables the amber DRL settings applied in this video? Please advise as I have my forscan tool being delivered on the 30th of April
I have a 2019 F150 Lariat. Trying to get my rear LED taillights to always be on in the daytime. Would need to code the Parking Lights only right? If I do this, when it gets dark, will the Low Beams turn on as usual? Or would you recommend to just code it for Parking Lights + Low Beams? Cheers
If your parking lights are set as your DRL, the tail lights will also run all the time. Here's a great thread to read through: www.f150forum.com/f118/setting-parking-lights-drls-great-find-380225/index24/
Hey there could you help me? I have a 2019 F150 lariat that came with halogen headlights and I just put in the Anzo switchback headlights but the white drl only comes on for about a minute when I first put it in gear and will just shot off after everytime, I’ve tried putting in the code for the anzo headlights in forscan several times but it doesn’t want to stay on?
I tried doing the LED and Halogen for the Parking DRL only and I couldn’t get it to work? Could someone please confirm that is the correct information I need to input? I have a 2015 Lariat with all LED.
Ricardo's Workshop yes sir, I tried like you have it showed on 5:45 on this video. Since I have LED it should only be the two 26-02 and 50-01 or so I do all three for the Halogen? Great videos BTW, I have done almost all your mods!
hi man quick question, i installed an led strip switchback bar inside my headlamps, where should i connect the positives to get them work as DRL only and not the low beam how it comes originally, i have a 2019 ford f450, thanks
Hey man. Thanks for all the great videos! Question for you. I want to have to PARKING LIGHTS AND FOG only on. No low beam no turn. Can you help with the code please. Thanks.
Thanks for watching! I'm not sure if you can... you could try a few variations of the codes to see if it works for you. Remember to backup your original settings!
Doesn't work for 2022 F150 XL. Its only off or on for DLR. High beam with fogs does work. Friendly FYI. Note, I did try putting numbers in and also enable/disable. Neither worked.
Hey man great thorough videos! I have a 2015 platinum and did this mod. Do you know the numbers to plug in to revert back to having only the low beams as DRL? I can’t find it anywhere on the web. Thanks!
@@ricardosworkshop Thanks for the reply I will try it later today. My only concern is to change to DRL's don't we have to change two values? IE: 2 separate lines of code? Either way I'll let you know if it works. Thanks again!
Here's a thought, instead of using FORScan, why not just block off the day/night sensor? It's like having the nighttime lights always on, but without the risk of draining the battery because you can leave it in auto.. (2019 Raptor owner)
I have a 21 expedition max. I want to turn off the daytime running lights. How do I find the chart to be able to find the codes needed to adjust certain things I want to change?
I have a 2016 Canadian model. I got on the spreadsheet and did everything to put the option on my settings to turn the drls on and off by clicking the box. The option is on there now but they are just off and don't come on by checking the box. Did I miss something?
Nevermind, I figured it out. I was testing it at night and I know now that the headlights have to be in auto for the drl to work. So in the daytime the option on the dash works like it should.
Great video bro. Thank you very much. I had made some changes and didn't keep track. Long story short the Anzo White Halo would stay on for 10 minutes after truck was off and light would flash every 10 minutes unless I unchecked DRL in settings. I was a lil nervous but finding and watching your video gave me the As Built digits that I didn't backup and showed me every code to every sequence so I could get them done correctly. Can't thank you enough but I did subscribe. Great video my man.
Hey I just watched the video and did the position lamb and turn signal only setting. For some reason my DRL is now the low beam, position lamp, and turn signal. Do you know if something didn’t work or if it’s not possible to only have the position and turn signal? I’m also wanting to brighten up the position lamp but I haven’t gotten to that yet. Any help is appreciated. 2016 F150 Limited with factory LEDs
Thank you for the video. I set the amber LEDs as DRL but you can barely see them during the day. Is there a way to make them brighter? Thank you
So apparently this worked for you? I can’t seem to get that to work. In order to have the park lights on I have to have something else on as well
Just wanted to say thank you for this video. I've watched lots of your forscan stuff. I tried to switch my DRL to fog only using the famous "spreadsheet" but it only lists
BCM 726-4501 xxxx 7Fxx xxxx
BCM 726-50-01 04xx
I added the BCM 726-26-02 x1xx xxxx xxxx and this time it worked.
Thank you very much for taking the time to help people. You are Awesome.
Question, I just purchased a 22 F150 that originally came from Canada. It is a lariat package that should have daytime running lights with the new LEDs. Can’t seem to find daytime running lights anywhere. When I go into the system on the big screen, it does not show it as an option. Is there a way to add this as an option?
Hello, I believe you can. But I haven't done it on the new modles. Waiting to pull the trigger on one. Hopefully this year.
Hello question will this work with other aftermarket heads that convert halogen to the led? I have the vland headlight and I would like to just have the halos on instead of both the halos and headlights during the day. Thank you for your videos Ricardo!
At 5:46 what are the “x’s” is that how to type it in the boxes, xxxx 7Fxx xxxx, or do those represent blanks?
I have a 15 platinum as well and have the switchback DRLs from Diode Dynamics in and I am trying to figure out how to have the DRL white as the running light with the low beam off. Can’t seem to figure it out.
wich one is the front running amber light not the brigth amber turn (just the regular amber ,there is high and low light on the amber,want the low side) thank you... my truck doesn't have the front led...
Do the DRL operate when the light dial is in the O position (far left, off) or turned all the way right to the A position? I’m considering toying with DRL in FORscan but only if it works when the light switch is off; I don’t want to screw with the auto-lamp feature.
When DRL is active and enabled, they turn on regardless of how the headlights switch is set.
@@ricardosworkshop thanks!
My truck only has an auto-lamp control in settings menu of the gauge cluster. There is no actual DRL setting. Are some trucks devoid of DRL? Seems unusual. I’d really like to set a custom parking-light DRL in FORscan to avoid having to manually switch them on every time I drive the truck. What say you?
Thanks for the video! If I have a 2017 Super duty(halogen), is this the same? I want only turn signal lamps on with my drl’s, nothing else to be on. Thank you!
Hey Ricardo, is there a was to make the Factory Halo white instead of amber? Kind of like those ANZO lights. Are there LED’s or bulbs you can switch for the color? Please let me know. Thanks.
I also would like to know this
I'm confused at 5:44. Is that what I need to get parking lights only? I tried and now the option doesn't come up in advanced settings. Parking lights are on but so are head lights
Depends on what you have. LED or Halogens.
I did the values for parklights to be on as drls on my stock led headlights and nothing happened when the knob is in the "auto" position. It instead replaced my lowbeams with park lights to just park lights "only" when on the ON position. Hope you can help me fix this. Ive read somewhere that said they only come on if its in drive idk if its true.
Would the 2020 f150 with tech package have this module? I installed led headlights with DRL leds, and would like to turn on the DRL if that is an option for the XL trim package
If you have aftermarket headlights, like the morimoto XBs would you use the code for the LEDs or the code for the halogens?
Same question
Thank you for this.
Question, if you don't mind...I have the Anzo switchbacks and went to do the white halo's as DRL's. However, when I went to change BCM 726-26-02 to x1xx I got an invalid checksum error. Any thoughts?
I've seen this happen often. But the system will automatically correct itself.
Double-check everything, save original settings, and you can try again.
@@ricardosworkshop In my case, I had to change 726-45-01 first. Then it let me change the other two. Thanks again!!
Hi Ricardo.
Great video brother. I tried using your settings for “parking lights only” but the low beams still come on when I turn the switch to off.
I’m trying to get a set up where I can turn the selector switch to OFF while in gear and be completely dark for when I’m hunting. Do you have the codes for master disable for the DRL’s? I’d appreciate any help you can provide.
I would like to know this as well
i have the alpha rex pro series headlights...will this work the same with my application? i have the drl harness installed. i dont want the low beams to be on during the day. i have a 2018 f150 and no option to turn on or off the drl in the cluster control. i only have the autolamp to select
Yes. You should be able to disabled the DRL. Or change it to any of the options.
So when 726-29-02 value is changed to 1, does that turn all the lamps/headlights/fogs to full bright or is it just the running lights?
Or is there a way to change all running lights/headlights/fog lamps to bright without having to chose one or the other?
I have a 19' f150 with the led's.
Yes... setting 1 supposedly allows all DRL at full brightness. I haven't noticed.
Hello!
I have a question.
I have the same fordf150 as the one in the video.
The Daytime lights option does not appear in my car settings (see minute 5:17)
I have the forscan. Do you know what code I have to change to make this appear?
Thanks for your help :)
I added the auto headlights switch and sensor but they don't come ON in auto. Is there something than needs to be changed with forescan? If you are willing to show me I can compensate for your time. Thanks in advance (2012 F150 RCSB STX)
Make sure DRL os on. And double check the codes. I believe you got all you need
Is there a code for low beams at night with amber halo?
Is there a way to make the fog lights come automatically with the headlights instead of having to push button every time the truck is started at night?
I dont think so. Only with the automatic setting
Ricardo's Workshop what I mean is, every time truck cut off and started back ya gotta actually push the fog light button again to turn them back on.
Right. But my truck has a day/night sensor and automatically turns headlights on/off, with the foglights. Thats the only way i think you can do it. Upgrade the switch to Auto amd add the sensor. 🤷🏻♂️
Ricardo's Workshop mine has automatic headlights too, its a 16 King Ranch. But I’ve noticed that every time I cut the truck off and restart that only the fog lights have to be manually turned on again. It may not be do-able, but if ya look into it and find out let me know or maybe do a video on it. Thanks!
That's interesting. I'll look into it.
Is there a code for the mirror turn signals to be part of drl? Id like to put mine as the park lights and turn signals with the mirrors
Hey bud. I did the coding for the front turn signals only on my mustang. Is there a way to turn off the rear parking lights ?
Is there a way to adjust the brightness? I set the amber surround only but it’s very dim.
I just want to disable drl completely I bought a Canadian truck but live in the us. I have tried different codes and have not had any luck. Any suggestions? Ty in advance.
I disabled mine through the dash menus. But I know Canadian is different.
Sir.. can you please help me with my f-150 xlt 2018. After I replaced after market led bulbs on to my headlight, the low beam won’t go off when it’s on drive mod even the light switch is off mod. But If I put the truck on park mod, the lights go off. I don’t want to drive with the light on every time. Which fordscan should I use and what do I have to to change.
Hi Mr try. When you say you replaced the aftermarket led bulbs. Do you mean you upgraded to aftermarket LED or replaced the Halogens with OEM LED? If its OEM, it sjould work fine as long as its set correctly in forscan.
@@ricardosworkshop Sorry about the unclear question that I have to you. I m a second owner of a truck f-150 xlt 2018 originally from Canada. I believe that the first owner must changed a few things on the drl of the truck before. Now that I have no daytime running light option to turn on/off in the display setting. First With the factory halogen headlight my truck the headlight was working fine as normal until I replace it to led bulbs. Since then every time when I drive or reverse the truck my headlight low beam just automatic turn on even the light switch is on off. And when I put it on park my headlight low beam would goes off. Now that I replace the old factory halogen headlight to a new one called Morimoto xb 2nd generation and I still have the same problem as when I replace it to led bulbs. I don’t want my headlight low beam and the C shape led light to be on every time I drive as it on off mode. Please share your thought, thanks.
Hi Try, so Canadian vehicles are locked with DRL due to their laws uo there. You would probably have to change this in the IPC. Then you should be able to change to your preference.
Maybe you can help me. You seem to a broader understanding of forscan. Im trying to program DRL in the park light/turn configuration but it keeps blocking me. I currently have the DRL with just the park lighs and it works fine but i cant get the turns on with them. Do have any experence with this. 2017 F150 Lariat.
Thanks for watching Ernie. If you have LED Headlights @6:00 should work.
BCM 726-26-02, 726-45-01, and 726-50-01.
Ernie, what did you input to get your parking lights only to work? I tried doing it tonight and I could get it. When I put the vehicle in drive nothing was coming on in the headlights.
So for the high beam only do you have to make the changes to all three sections? Do you even have to make the change to the top one of you can activate the drl from the dashboard?
You can do a lot with the dash settings. But yes, all three sections of the BCM
@@ricardosworkshop thank you. I upgraded from factory 17” wheels and tires to factory 20” with 275/55r20 at tires. Do you by chance know how to recalibrate the speedometer?
@@alexl3383yes sir... th-cam.com/video/92H4OQ2P8-s/w-d-xo.html
@@ricardosworkshop
Thank you very much. Does forscan void the manufacture warranty?
Not sure... i don't believe it does but you can always revert it to original settings if you're gonna take it in for service.
So I have tried to get just the park lights ( halos only) to work but they wont all I can get is the park and turns to come on. Any ideas what I can do?
You might have to play with the settings a bit. Checkout forscan.org too
@@ricardosworkshop Ok thanks I'll try. I have tried every thing and I can get all the ways you described but cant get just the halos by themselves.
Fantastic video man. I got stuck changing mine to disable and couldn’t figure out why. This video explained it. Just do I have it in writing, can you tell me the 3 locations you changed and what the settings would need to be set at for disable?
Thanks bro!!
@Matt Camara thanks. It is Canadian. Where did you see that spreadsheet? Google?
Hi Ricardo, thanks for this and more other helpful videos from you 👍. I programmed and activeed just the daytime running lights on my 2017 F-150 with LED lights. Upon cranking the enigne, lights to AUTO and column shifter to D bingo - DRL are there. Next day another engine start, lights to AUTO and D -> no DRL anymore😳. Any idea? I checked by forscan the values BCM 726-26-02 reps. 45-01 are still there. Thanks for your feedback.
Is there a way to prevent the user from unchecking the box for daytime running lights? Basically always force the running lights be always be on if the vehicle is on? No way the operator can turn them off.
I'm not sure if you can woth every truck. But the f150s with the 7inch instrument cluster does have the option.
Ricardo's Workshop I’d love to know how! Canada requires the vehicle have daytime running lights on all the time. The issue is with my 2017 f150 it has the option to turn them off. Also if I change the lights from auto to off they turn off...
I believe its in ghe BMC 726-50-01, 017F
But checkout the spreadsheet docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit?usp=drivesdk
I hope this fixes my turn signal switch back led issue. My drls should be white but the low voltage drl sent to turn signal makes them go amber and flicker orange. I have to manually turn on park lamps to get the effect I want.
Is the only way to get the halos on Anzo Lights to work is by using this method? Thanks
You might be able to connect them directly
Hi! I set turn only as drls but it isn’t on at night. Any ideas I can keep it on at night? Appreciated for your help.
Drl are Daytime Running Lights. At night, you probably want to drive with the actual lights on.
Did you figure this out?
Good Afternoon sir! Great video! I'm actually looking to turn my Alpharex Pro Headlights DRL to STAY on amber as the color vs white. Would you be able to help?
Did you ever find a way to do this
Quick question, If the switch remains in “auto”. Does this mean that when the headlights come on at night it disables the amber DRL settings applied in this video? Please advise as I have my forscan tool being delivered on the 30th of April
Not on my truck. My DRL setting are only for daytime running lights. At night it works normal...on auto or using the on/off knob.
I have a 2019 F150 Lariat. Trying to get my rear LED taillights to always be on in the daytime.
Would need to code the Parking Lights only right? If I do this, when it gets dark, will the Low Beams turn on as usual? Or would you recommend to just code it for Parking Lights + Low Beams?
Cheers
Thanks for watching Jerry. I dont believe the DRLs control the taillights. Only the headlight.
If your parking lights are set as your DRL, the tail lights will also run all the time. Here's a great thread to read through: www.f150forum.com/f118/setting-parking-lights-drls-great-find-380225/index24/
How would I make my cab lights an mirror light come on with my drl on f250?
Will the Anzo white halo code switch the factory halo from amber to white? Or, is the mod only for/if you actually have the Anzo aftermarket part?
No. The factory halos are amber (15-17). You would have to change the lights to get them white
Thank you for taking the time to reply to a video that's over a year old. Take care and happy holidays!
Can you tell me more about the anzo lights? I have a ‘18 raptor. Is that compatible? Thanks
There are many variations of aftermarket lights. Ford OEM black. Anzo. Morimoto. Alpharex. Recon. AlphaOwls. They should all be plug and play.
Ricardo's Workshop mr Ricardo I have a 2011 lariat limited and I’m having a hard time getting my DRL lights to come on can you help me out
I'm not sure about the 2011 but do you have the options in the instrument dash?
Ricardo's Workshop Nawl I don’t
Hi there! Does the cording work on 2016 Fusion as well?
can you us Forscan to turn off the factory alarm on a 2015 f150 Lariat? or at least get rid of the all sensors setting
I believe you can.
Thanks for all the videos you have provided. It's been a big help. Question, is there a way to have running lights and fog lights on at same time.
I am looking for parking lights and fog lights. Did you ever find a way?
@@mattp1482 no I haven't
Hey there could you help me? I have a 2019 F150 lariat that came with halogen headlights and I just put in the Anzo switchback headlights but the white drl only comes on for about a minute when I first put it in gear and will just shot off after everytime, I’ve tried putting in the code for the anzo headlights in forscan several times but it doesn’t want to stay on?
Im not sure its a code issue... sounds like it the lights
Great Video.......Thank you,
Wich one Is better. Parking lights only vs parking lights with turn signal?
Hey Felipe... i think turn signal.
@@ricardosworkshop now i am using parking lights only, but i think the yellow light Is very weak... in the day they hardly see
I tried doing the LED and Halogen for the Parking DRL only and I couldn’t get it to work? Could someone please confirm that is the correct information I need to input? I have a 2015 Lariat with all LED.
LED and halogen?
Ricardo's Workshop yes sir, I tried like you have it showed on 5:45 on this video. Since I have LED it should only be the two 26-02 and 50-01 or so I do all three for the Halogen? Great videos BTW, I have done almost all your mods!
@@PSUPearsonSo with LED just do 26-02 & 50-01(01xx)
Or
For Halogens do 26-02, 45-01 & 50-01(108E)
This should be the same for the 2017+ f250 and f350 right?
I believe so. But the color of the wires are different. 👍👍
What number do I change so I just have the led lights on instead of the drl that always turn on in drive
I think it 01xx for stock LED. And 10xx for aftermarket. 726-50-01
I believe its at 5:44
Ricardo's Workshop figure it out lol i have a 2019 mustang gt it was the same concept your video helped a lot thanks
Would the anzo halo configuration work for the alpha rex halo?
I would believe so.
Did it work for the alpha Rex
Great video!..I always wanted this done I have the same headlights As yours.. I just got the lariat tram I’m curious which one did you go with
Hey Hervey... thanks again for watching! I went with fog lights but keep DRL off.
Hey I tried with the parking lights only and it came back riding blocks failed ..we the Halogen lights right??
It should work with LED too
Ricardo's Workshop what light do you have?
LED oem but in order to extend their life, I turned DRL off
I tried this and it wouldn't save the settings. What did I do wrong.
How would I do parking lights and fog lights?
I'm not sure if you can do that. You can try a few different codes but remember to save your original settings. Also checkout forscan.org
What bulb do you use for ur high beams ?
Hi Marcos. They are OEM Ford bulbs. Not Anzo or aftermarket
Is there a way I could use this as drl and also have the fog lights on always
Use the fog lights as DRLs... yes
@@ricardosworkshop how exactly could I do that?
Its in the video...6:06
@@ricardosworkshop oh ok, thanks I missed thst
@@ricardosworkshop oh ok, thanks I missed thst
hi man quick question, i installed an led strip switchback bar inside my headlamps, where should i connect the positives to get them work as DRL only and not the low beam how it comes originally, i have a 2019 ford f450, thanks
Does this work for other headlights too ? (i.e. Alpharex)/
Hey man. Thanks for all the great videos! Question for you. I want to have to
PARKING LIGHTS AND FOG only on.
No low beam no turn. Can you help with the code please. Thanks.
Thanks for watching! I'm not sure if you can... you could try a few variations of the codes to see if it works for you. Remember to backup your original settings!
Thanks
@@kkiocanada www.f150forum.com/f118/setting-parking-lights-drls-great-find-380225/index24/ read through this thread; it can be done.
Can you do turn signal and fog light on as drl?
Not sure. You could try a few different code combinations but be careful.
Doesn't work for 2022 F150 XL. Its only off or on for DLR. High beam with fogs does work. Friendly FYI. Note, I did try putting numbers in and also enable/disable. Neither worked.
Good video
Hey man great thorough videos! I have a 2015 platinum and did this mod. Do you know the numbers to plug in to revert back to having only the low beams as DRL? I can’t find it anywhere on the web. Thanks!
Im not sure what yours would be originally but i think my 726-50-01 started with 0Axx
@@ricardosworkshop Thanks for the reply I will try it later today. My only concern is to change to DRL's don't we have to change two values? IE: 2 separate lines of code? Either way I'll let you know if it works. Thanks again!
Not working for me. Nothing changes at all. Please help
How do you get Forscan on mac?
When I hit play on the module it says “sorry, you need to have an extended license to run this function”
Right same here I’m in the same process
Thank you for your time, can I open DRL light in front only, Without Rare light?
Yes... it shoud be front only. Not rear.
@@ricardosworkshop I really appreciate
Sir but how do you know that numbers is correct can you teach me
Watch this video and read the description
th-cam.com/video/ZvkkQZFIzyA/w-d-xo.html
Here's a thought, instead of using FORScan, why not just block off the day/night sensor? It's like having the nighttime lights always on, but without the risk of draining the battery because you can leave it in auto..
(2019 Raptor owner)
Lol... good idea Milo!
Mich ultra haha nice
Mine said failed incompatable configuration?🤔
Double check the input. Make sure you're using the right codes for LED or halogen. And forscan.com has some great troubleshooting too.
Hi. Where your location?
Houston Texas 🤘🤘
@@ricardosworkshop may i have your address and phone number pls
Ihi Brian, i dont have an actual shop.
@@ricardosworkshop may i have your phone number so i can text or call
Ricardoalanis@msn.com email me your contact info, What did you need help with?
I have a 21 expedition max. I want to turn off the daytime running lights. How do I find the chart to be able to find the codes needed to adjust certain things I want to change?
I have a 2016 Canadian model. I got on the spreadsheet and did everything to put the option on my settings to turn the drls on and off by clicking the box. The option is on there now but they are just off and don't come on by checking the box. Did I miss something?
Nevermind, I figured it out. I was testing it at night and I know now that the headlights have to be in auto for the drl to work. So in the daytime the option on the dash works like it should.