1982 Kawasaki 750 Ltd Rebuild (Part 18 Clutch, Pushrod, Throttle, Electrical)
ฝัง
- เผยแพร่เมื่อ 1 ก.พ. 2014
- An update of the work I have been doing over the past week. I cleaned out the clutch cover and clutch mechanism, adjusted the clutch. In addition I re-installed the carburetors and throttle cable, reconnected the exhaust and refurbished the battery box. I still need to finish some things on the engine before I can give it a first start!
- ยานยนต์และพาหนะ
I do like watching your video's on the 750 ltd. I myself have one and your video's give me a good idea as to what problems I can come up against when restoring / fixing it. Well done. You have done a really good job on it.
Great video! ! Thanks for all the tips .☺👍
Looks pretty sweet! I'll have to watch your earlier videos.
@1:09 Talking can be fun! 😂
hi dude can you help me with a problem i have a similar bike ! can you tell me about the rectifier /regulator has 5 wires that go into a socket and a separate white/red wire that goes where? i can't figure out what it connects to? Please help. The bike is not assembled yet and i won't start it until I'm 100% positive where this wire goes . thankyou aquabug for helping me with your videos.
did you have to drain the oil to get to the clutch?
I own a Kawasaki kz440a. I have a starting problem. there was a short in my wiring that affected my lights and starter. I have bought a new battery. rewired the lights and in the process discovered there is a light green wire coming from the left side under the clutch plate cover, that is not connected to anything. I would like to ask you what this wire should connect too. I believe this wire is why my bike will not start. I can not find where this wire hooks up. I do hope you will be able to help me.
Stacy Holbrook I have a 440a as well. The only light green wire I can see in the service manual connects to the neutral switch. Here is a link to where I got the manual. Hope that helps.
www.kz400.com/Workshop%20manual%20bilder/Kawasaki%20KZ440%20Service%20Manual.pdf
Awesome thank you so much
Stacy Holbrook how is it going. I would like your help i have an 1984kz700 kawasaki haveing problems getting my cluch to engage new clutchs i am thinking my push rod is broken should i be able to kust pull it out on the cable side because when i pull on it it only comes out about 1 inch and stops i dont want to try and force it . and my engagement whatyamacallit is stickin to the rod when i pull the cover