ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- How to install the Decked drawer system with a Fas-top traveler soft truck topper and a Fas-top original tonneau cover. These 2 products bring a lot to the table. Fully utilizing the back of your truck bed to its maximum potential. #fastop #decked #ford #fordf150 #fordtrucks #f150 #f150raptor #f150lightning #f150tremor #f150mods
I've had my Decked for 4 years but just added the Fas-Top combo...love it!
I like this setup! The best of all the worlds! The drawers keep gear/tools out of sight, while still allowing full horizontal use of the bed.
The top provides protection from from the elements, and keeps lighter stuff from blowing out. Then, folds out of the way the rest of the time.
For mid-size trucks with lower bed height, how do you get the compatibility to work say Gladiator or Frontier for the Traveler Fast-top 2-in-1?
@@D_F_L_ In the comment section when placing an order specify if you have a Decked system or not. We will have a solution for you.
But thats what I’m asking, what are the solutions of the 8.5 inch pivot + 12.3 inch = longer than the bed height? What are some solutions with the Fast-top 2-in-2 install? I don’t see any videos or description on your website that provides a solution. What are some options if the height is too short to accommodate both? Can you share what could be some potential solution for the pivot mount being so low into the bed where interfere with the drawers unless you have a bed height of 8.5+12.3 =20.8 20.8 of total height?
@@D_F_L_ with the gladiator or Nissan we have a pivot foot riser that allows for more swing travel when operating. It will lift the topper frame higher during the swing.
@@fas-top2867 so higher pivot just during the action of the swing converting but it still sits the exact same in topper mode even with the foot riser right?
@@D_F_L_ correct pivot foot raises just for the swing. Then it will sit back to normal when deployed or stowed