How to remove door panel 2008 Chevrolet Silverado 1500 LT (better quality)

This is the second video that I made doing this exact same thing...I did this one with a better camera.
I apologize for the wind noise, didn't realize how windy it was outside.
Comment with any questions, and I will reply!!
Thanks for watching!!

[@tpeterson3183]

Thats how you do instruction videos. To the point and know what your doing. No stupid music playing. No talking to your dog or your horse. No history lessons. We are Americans we dont care about its history. Great video cowboy.

[@tbeas33]

Excellent video!...I am getting ready to replace 3 of these junk lock actuators in my 08 chevy silverado
Very good demonstration, I feel confident now how to tackle this job
Thanks so much buddy

[@catfishhunter6547]

This is how to video at its finest. I have to replace cable and instead of paying mechanic 200 for parts and labor all I have to do is order cable from Chevrolet for 70 bucks and now I can put on myself. I could not get panel off my Silverado after wrestling with it for an hour. I was so frustrated I came close to ripping it off. I missed a few important steps on how to get off. Good video. Ty

[@tylerhogland7529]

Thank you very much! Glad it helped!

[@daver728]

Thanks man. Saved 2 hours. Basic no bs instruction. Thank you

[@MrGreenbakz]

Thanks. I needed this today to replace my mirror. I watched another video for a truck that had a different door panel. You showed me that the top front handle had two more bolts that needed to come out.

[@ivanhernandez8786]

S

[@carlospowell5315]

Thank you so much for explaining about the door handle that's what throwed me off.

[@ztwntyn8]

Thanks for the vid. I knew that door handle trim had to come off but I was afraid to break it. Customer vehicle..... thumbs up

[@Phonicray]

Thanks on the video, I hope you survived the tornado.

[@ghatton1990]

Lifesaver!!! Thank you for posting this!

[@paulgrossi60]

Great video, huge help. P.s. put some foam over the microphone to reduce wind noise.

[@shunttripper373]

Thanks Okie for this vid...it is the only one out there showing the panel removal

[@retrobro6667]

Great video how'd you change handle and lock though?

[@forrestjoyner7593]

Thanks. My speakers, like most people's have finally gone to tweeters only and I can't deal with that. Like others said, thanks for no music or other wastes of time.

[@joseavalos1286]

Will a 08 suburban 1500 rear door fit a 11 Silverado 1500???

[@FireworkOkie]

I appreciate the video. Very helpful

[@billykillians1]

Do you have to remove the whole door panel to replace a speaker? Or is there a way to pop the speaker grill off and access the speaker without removing the whole panel?

[@okieboy6073]

As far as I know, you have to remove the whole panel. It has been a while since I have done it, but it seems like there wasn't any way to do it without removing the panel.

[@pathann99]

thanks brother, both my front factory speakers are shot. this will save me some $$.

[@duelette]

Thanks for taking the time! Big help!

[@ronaldallen1252]

I trying to take the pane off with the door shut because the door opening mechanism broke so I’m going to try getting enough movement to open the door before continuing with the full removal.

[@josephmitchell204]

Thanks! Ima do all four windows as a preventative measure.

[@stewartboyce]

Thanks very good information

[@acorral5]

do you know if its one whole piece or if you can take apart the top piece panel from the bottom piece panel?

[@okieboy6073]

As far as I know, the panel is one piece. I can't say I have ever tried to separate them though. It may be possible. Why do you ask? Is just one part of the panel broken?

[@acorral5]

Its not broken or anything. I wanted to wrap it with carbon fiber wrap and I only wanted to do the bottom half of it.

[@eduardorincon5906]

Thank you amigo

[@thefelixpinon]

Great video thanks

[@blakestratton4643]

Thanks Okie boy!

[@jutgin]

Great viedo, thanks

[@jsalazar1527]

Great help thank you..

[@misaelayala7368]

help me a lot gracias!!

[@worfack3235]

Muy bien gracias amigo

[@dillonduty8084]

I guess I’m different I have to do all this with the door closed because my hand broke and now I can’t get my door open

[@armandohernandez4882]

Gracias vato

[@kylestude940]

Are you kidding me. I'm concerned that everyone who saw this, actually did it that way.

[@tylerhogland7529]

I'm sorry. Not sure what I did that was so awful...

[@convict249223]

I was going to try to fix the door speaker but after watching this I think I'll just pay someone else to do it..

[@okieboy6073]

Haha, It actually isnt too bad Michael. I hoped that the video could help someone save some money. If you do decide to take it on, and have any questions, just let me know, Id be happy to help.

[@MikeSmith-nu9wt]

Gm really screwed the pooch on there new door panel / handle design , a proper way would be to fasten the interior door handle to the door and build the interior panel around it , they must have had new guys design that garbage

[@joleenanglley3388]

I ppu

[@mwp574]

Horrible camera angles. Horrible explanations. "Right here, right there, right here, right there"

[@jaketrevino3095]

Mwp what do want him to put the camera right up on his hands lmao I don't see how it could be anymore instructional.

[@chapleaudick]

thanks for the info I have a 08 2500hd lt and the rear doors won't open their is nothing connected to the handle , feels like anyway thank god the seats fold up I can hear the actuators working but only with the fob nothing happens with the door buttons I checked the fuses everyone of them is ok any ideas

[@okieboy6073]

I'm guessing just based on what you've described there is something wrong with the door handle itself? Have you attempted taking the back door panel off to look?

[@chapleaudick]

I got the panel off, that was fun with the door closed , the outside handle is not connected, but even manually moving the rod does nothing the leavers are moving at the mecanism . I guess I'm off to the dealer

[@tpeterson3183]

Thats how you do instruction videos. To the point and know what your doing. No stupid music playing. No talking to your dog or your horse. No history lessons. We are Americans we dont care about its history. Great video cowboy.

[@tpeterson3183]

Thats how you do instruction videos. To the point and know what your doing. No stupid music playing. No talking to your dog or your horse. No history lessons. We are Americans we dont care about its history. Great video cowboy.