Vespa px 200 changing engine mount rubbers
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this episode we change engine mount rubbers/silent rubbers on a Vespa px200e.
If the rubbers are worn out the handling of the bike will be bad.
we will try to do this job without removing the engine.
Don’t forget to subscribe and like 👍
![ง้อ (ALRIGHT) - FOURTH [ TEASER ]](http://i.ytimg.com/vi/ya6MBfo-Wvg/mqdefault.jpg)
The good thing is: thank you for making g this tutorial saves my day. The bad thing is: mine is also broken so I need to watch your tutorial to fix mine.
I hope you’re helped by this video.
Thanks for watching, I’m sure you will change them without problems.
Great video, rather jealous of your garage 😉
Thanks 🙏. Yeah it’s a nice garage with some good space .
nice job, and you sure have a nice man cave there 😊
😁thanks
This video has a cliff hanger at the end...( will the wobble be fixed, tune in ) but this give me time to get a cinnamon bun and coffee ready....
It’s fixed
Love your videos. Can you please do one on how you use the jack to lift the Vespa off the ground please
Thanks for the feedback.
Sure I can do that. Stay tuned and I will fix that in a couple of weeks.
Great video, thank you! i was just prepering myself for do the same operation , also without taking the engine out. Now i have a good idea of how can turn out.
Also i notice the vespa goes very unstable and woobling on the road over 70km/hr. I hope it improves , is very scary on windy days.
How turn out for you after changing the rubber supports?
Hello.
It came out great.
Make sure to check that your upper and lower bearings in the fork are tight.
And the bearings in the suspension arm can be bad too.
And of course always check that your rear wheel is tight.
Yep, that's quite the wobble..
That was nothing compared to when the rear wheel and the steering column was loose also 😁
Does the methal tip of the new rubber need to sit in the hole of the frame? I have the same ones but my hole in my frame is the samr size as the ones in the rubber. The old ones were the same but not sure if it suppost to be like that.
@@domufflegere they’re not going to sit in the holes of the frame. The metal tip should be pushed against the frame
Ah ok ty. My new engine side rubber is a little bit to deep in the engine so the engine itself is attached to the frame. You think thats bad?
@@domufflegere normally the metal tip is sticking out a bit from the engine and then it should be really tight to get it in to the frame.
So I would say that the engine itself should not be in contact with the frame.
@@Nordicexplorer1 hmm then i have to get them out again god damn. Probably gonna vibrate then too much
@@domufflegere seems weird that they are too far in, have you maybe got the wrong ones?
Normally the pipes of each rubber meets in the middle of the engine so that you can’t push them too far in.
Sound got muffled a few times during the video...don't yah hate when that happens....?
Dear Sir Which number of tool that i need to buy to ipen the exl