No sponsors, no drama, no cursing, no attitude, no bullshit and best of all, NO LOUD MUSIC! Another great build man, thanks for bringing it to us. 100k is right around the corner. Cheers!
Brent all this truck needs body work and paint.You made a great vehicle. Your fabrication is second to none. Love your work.And your videos are great and entertaining. Blessings
Wish I could by one of your creations some day,I do pant and would love to see all that beautiful design and fabricating finished to a higher level with paint.thanks so much john from arizona
It was hard watching you cut up that old pick up for panels, but with your skills, if you say it's too far gone, ..then it's definitely too far gone. Keep up the good work
Yeah that pick up looks great doesn't it... all that patina with the nice and bright chrome. Such a shame. I bet you in 10-15 years it'll be one of the better candidates as a project!
When the buyer finishes it I hope he’ll follow up with you so we can see how it turns out. You did a nice job with the foundation and saved an old panel that other wise would have rusted away.
Yep, I'd love to see how this one turns out in the end. I hope the new owner will finish the job properly. It would be great to see the van in shiny paint, with the chrome polished up. Patina finishes have their place but these huge side panels are screaming out for a custom paint job.
Talent. I'm not much on metal. Fabrication. I mess around with wood. But you make it look easy. You know what you want to do. Why it needs to be done. In what order. And a few different how(s) to do it.... That's why These Videos Rock !
A great van. Looking forward to the hotrod build. I have finally caught up and have now watched all of your vids. Done a vid blitz and watched from the begining to where I started to watch your builds. Taken me 3 days to watch them all.
Brent, you are a fabricator extradinaire! You have such a good eye for the lines, and you make it look soo easy. Nice that you have built such a nice collection of tools that help you bring it all together. Thanks so much for sharing...love the content. I sure would like to purchase one of your "creations" 🙂
This is slightly off topic but I'm impressed and I like this so here goes.........You do the best job anywhere that I've seen on selecting the music for your videos......Don't know how big a job it it is for you but if it's just easy, then you have a special talent and a great ear.........Also wanna commend you on not blasting us away with too much volume as so many others do......Great job!!!.
Another great build Brent……have been out of circulation here on this end….medical problems….. so have gotten up to date on my favorite builds….. of course yours is top of the list…..keep building and saving old iron…….👍👍👍👍👍👍👍🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦😉😉😉😉
The 61 f100 Step Side has that notch in the same rear fender for the spare tire. The spare sits outside the box with the mounting hardware and the bottom rear portion of tire sits in the notch. Another great truck Brent.
Well you a nice job getting the old 51 GMC ready to go with a little work for a new owner to finish up they have a nice ride myself i like the old rustic look its cool just like it is it just looks good that way its like it was meant to be.nice work and thank for the videos on that truck......
Cracking old truck and a cracking job. Thanks. Just watched the video you recommend. I'm apparently living in the wrong country for cool stuff lol. Be well and stay safe. UK.
SEEMS TO ME THAT YOUS CANOOKERS ARE TAKING OVER THE MOST IMAGINATIVE AND COOLEST LOOKING RIDES AND CUSTOMIZATIONS!!! I'M GLAD THAT I FOUND THIS CHANNEL. IT ABSOLUTELY GETS MY 'CREATIVE JUICES' GOING! KEEP IT UP! COULD YOU RE-DO A 40s INDIAN?????
i own a 1952 gmc fire truck tanker, got it on a bad debt. converted it into a gmc topkick, then found a wrecker boom and make it into toemater, all us kids love it. kept the big six 302, 5 speed tranny, and 2 speed rearend.
It is so kool to listen to your vision and then watch you create it. The end result is “Mint“. I see someone turning it into a RV or tiny home. Big fun, thanks. Another delightful diversion from my ex-pat Can-Am life in the Mekong Delta.
I am learning so much from your fabrication videos. I've got a 1970 Karmann Ghia that needs considerable fabrication. I'm using it as a learning vehicle. I don't have alot in it but will spend a bit on sheet metal. I'm about ready to begin on a floor panel which will be covered up so I think it's a good place to start.
I've never been a big fan of panels but that thing's pretty cool. Hell, all the junk you cobble together is pretty cool, your yard full of goodies is pretty droolworthy
it was a great project, liked the lines you created and keep with all the widening etc. Should be a great driver for someone. Thanks for posting you are so fun to watch and learn from. Dennis
Hey halfass 😊 good job , I've been Mechanical for years and Thanks so very much appreciated your time and video of panel repairs I've a better idea of how to wield without a raised panel ✌❤🥂🤩
Awesome job Brent ! It gives me motivation to finish my Grandfather's 51 one ton panel. He purchased her new in 51. Had a plumbing business in Newark NJ, then my Uncle took her out to Southern California in 1955. He started his own plumbing business out there too. I have her now back in NJ with hardly any rust because of her life in California.
Such a unique build, such a. Great channel… I watch because Brent is a master figure outer.. he masters all that he builds, then simplifies it for us. Way cool with way cool dogs , music and great drone views. Now that is very unique. Thanks for sharing your talents. Alberta Dave
Damn I wish I lived near you..! I'd buy that van straight away..! You use a zip cutter and torch as easy as I use a knife and fork..! Amazing skills....
Keep up the good work Brent, so good that you are able to revive these iconic old vehicles as well as salvage modern viable running wrecks. To me, it's 2 saves in one. Thanks for sharing.
This channel is my number 1 fave now .It used to be Andrew Camarata, but he is number 2 now as he doesnt put out as much content as he used to. This channel is tops as the content is great and easy to follow and plenty of uploads.
Great rehab job hope the guy does a nice finish job to it maybe they can send you a finish photo of it to show us ,looking forward to the next build thanks for the video from Prescott, Arizona USA, stay warm this winter my friend!
Loved this build Brent. I’d be proud to own that panel. Sounds like a lot of people would. Anxiously waiting for your hot rod build. Thanks for sharing. 👊😀👍
I came in After shoveling snow 2 x's and this is a much deserved rest and pit stop. Thanks for sharing Brent ! If you don't have any by today, look out it's coming your way . Take care , Blizzard here oh JOY !
Grew up in the St. Louis Missouri area and the youngest of 6 kids. Watched and helped my older brother rebuild a couple of those old panel vans/trucks in my younger years. You sure made that frame swap look easy with the hydrolic lift you have. You have definitely mastered the art of spotwelding. GREAT looking start on a never-ending project. Congrats on the sale of that old suburban. Cheers
Another great video but I love that 5 window coupe blue truck it doesn't look that bad . Could it be saved if someone was to put a newer truck under it and fix the fenders lol . Keep up the great work and God Bless you and your family Brent I love your videos and your a laid back cool guy also plus i love pablo too. 💯💪🏼👍👍🙏🙏✌😊✌
Great project, Brent! Yeah those box side spares were a common thing back then by all truck manufacturers. Also affirm your music choice. Blends perfectly with the work you do.
As usual sir. Great Job! Would love to own it. I noticed another channel decided to pull a truck to get it to break free. They gave you all the props for learning that from your channel!
No sponsors, no drama, no cursing, no attitude, no bullshit and best of all, NO LOUD MUSIC! Another great build man, thanks for bringing it to us. 100k is right around the corner. Cheers!
Brent all this truck needs body work and paint.You made a great vehicle. Your fabrication is second to none. Love your work.And your videos are great and entertaining.
Blessings
Love your stuff . I'm 69 years old , still love working on old vehicles
Hey Brent, great job on the panel truck, enjoyed watching you take it as far as you wanted to take it...Ralph
Just loving your choice of excellent music
Niemogę się napatrzeć na Pana umiejętności, szkoda że niemieszkamy bliżej, chętnie zobaczył bym to na żywo, pozdrawiam 🇵🇱
Love the music, love the projects, have enjoyed every one of them. Keep it up. I will be watching.
This is something I liked doing before I became disabled. You've got a new subscriber. Good job with this old truck.
Loved watching the “slice and dice” “patch and dash “ on this one. I would have a hard time letting that one go but you have so many cool projects
Wish I could by one of your creations some day,I do pant and would love to see all that beautiful design and fabricating finished to a higher level with paint.thanks so much john from arizona
It was hard watching you cut up that old pick up for panels, but with your skills, if you say it's too far gone, ..then it's definitely too far gone. Keep up the good work
Yeah that pick up looks great doesn't it... all that patina with the nice and bright chrome. Such a shame. I bet you in 10-15 years it'll be one of the better candidates as a project!
@@mikescudder4621 LP
@@splash1sb777 LP?? Sorry... i'm getting old
When the buyer finishes it I hope he’ll follow up with you so we can see how it turns out. You did a nice job with the foundation and saved an old panel that other wise would have rusted away.
Yep, I'd love to see how this one turns out in the end. I hope the new owner will finish the job properly. It would be great to see the van in shiny paint, with the chrome polished up. Patina finishes have their place but these huge side panels are screaming out for a custom paint job.
Hi Brent, Dennis here from Filer, Idaho USA. Here to watch you try and finish up the build on the panel truck. Thank you for sharing. I learned alot.
That's a cool old van, another one saved from the scrapyard. And it looks like Pablo's given it his seal of approval.
Somebody is going to be Very Happy to get this Machine... Wow! Thanks for Sharing
I would be happy to have some follow-up of the life of this van. I like it a lot.
Talent. I'm not much on metal. Fabrication. I mess around with wood. But you make it look easy. You know what you want to do. Why it needs to be done. In what order. And a few different how(s) to do it.... That's why These Videos Rock !
A great van. Looking forward to the hotrod build.
I have finally caught up and have now watched all of your vids. Done a vid blitz and watched from the begining to where I started to watch your builds. Taken me 3 days to watch them all.
Loved the video .Your choice of music was great too. So calm and relaxing. Well done
Watching you work gives me insight to some of my projects
Loving your choice of excellent music.
Brent, you are a fabricator extradinaire! You have such a good eye for the lines, and you make it look soo easy. Nice that you have built such a nice collection of tools that help you bring it all together. Thanks so much for sharing...love the content. I sure would like to purchase one of your "creations" 🙂
Another great job... cheers for taking us along.
This is slightly off topic but I'm impressed and I like this so here goes.........You do the best job anywhere that I've seen on selecting the music for your videos......Don't know how big a job it it is for you but if it's just easy, then you have a special talent and a great ear.........Also wanna commend you on not blasting us away with too much volume as so many others do......Great job!!!.
haha learned that from you folks not to quite not to loud haha
Amen to that. A++++
Another great build Brent……have been out of circulation here on this end….medical problems….. so have gotten up to date on my favorite builds….. of course yours is top of the list…..keep building and saving old iron…….👍👍👍👍👍👍👍🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦😉😉😉😉
The 61 f100 Step Side has that notch in the same rear fender for the spare tire. The spare sits outside the box with the mounting hardware and the bottom rear portion of tire sits in the notch. Another great truck Brent.
I would take it as is in a heartbeat WHO ever is getting it should be proud of it Hard work is done Great job
Well you a nice job getting the old 51 GMC ready to go with a little work for a new owner to finish up they have a nice ride myself i like the old rustic look its cool just like it is it just looks good that way its like it was meant to be.nice work and thank for the videos on that truck......
Your shows are pretty dang satisfying. ..Thanks, from Kentucky
Cracking old truck and a cracking job. Thanks.
Just watched the video you recommend. I'm apparently living in the wrong country for cool stuff lol. Be well and stay safe. UK.
Brent you are amazing fabricator! Very much enjoy watching and listening to you!
SEEMS TO ME THAT YOUS CANOOKERS ARE TAKING OVER THE MOST IMAGINATIVE AND COOLEST LOOKING RIDES AND CUSTOMIZATIONS!!! I'M GLAD THAT I FOUND THIS CHANNEL. IT ABSOLUTELY GETS MY 'CREATIVE JUICES' GOING! KEEP IT UP! COULD YOU RE-DO A 40s INDIAN?????
That's a great project truck... If I were a bit younger, I would love to tackle this
i own a 1952 gmc fire truck tanker, got it on a bad debt. converted it into a gmc topkick, then found a wrecker boom and make it into toemater, all us kids love it. kept the big six 302, 5 speed tranny, and 2 speed rearend.
This panel and the Mercury, are my favorite videos!
It is so kool to listen to your vision and then watch you create it. The end result is “Mint“. I see someone turning it into a RV or tiny home. Big fun, thanks. Another delightful diversion from my ex-pat Can-Am life in the Mekong Delta.
Kool Video You you got it so that it will be a great start for the new owner. Thanks for sharing
Great build enjoyed it. Until the next one take care be safe
Congrats on a cool completion and successful sale!
Hope who ever finishers her off, sends some pics! Great work Brent.
Awesome videos. So glad that you are putting these cars back on the road and finding new homes for them.
Gonna make the new owner a great project. Great starting point. Be safe and stay well.
I am learning so much from your fabrication videos. I've got a 1970 Karmann Ghia that needs considerable fabrication. I'm using it as a learning vehicle. I don't have alot in it but will spend a bit on sheet metal. I'm about ready to begin on a floor panel which will be covered up so I think it's a good place to start.
I've never been a big fan of panels but that thing's pretty cool. Hell, all the junk you cobble together is pretty cool, your yard full of goodies is pretty droolworthy
..hi Brent...interesting choice of music.....I wanted to assume the lotus position while watching you weld and hammer.......very nice.........
Wish I had your skills; it will look beautiful all cleaned up!
A fun watch once again. I love how you tickle yourself.
Sweet news on this panel truck-glade it's got a new home-thanks for your build video -really liked this channel Brent!
it was a great project, liked the lines you created and keep with all the widening etc. Should be a great driver for someone. Thanks for posting you are so fun to watch and learn from. Dennis
Hey halfass 😊 good job , I've been Mechanical for years and Thanks so very much appreciated your time and video of panel repairs I've a better idea of how to wield without a raised panel ✌❤🥂🤩
Awesome job Brent !
It gives me motivation to finish my Grandfather's 51 one ton panel. He purchased her new in 51. Had a plumbing business in Newark NJ, then my Uncle took her out to Southern California in 1955. He started his own plumbing business out there too.
I have her now back in NJ with hardly any rust because of her life in California.
Hi Brent another great video nice content always stay safe out there bro regard take care
Awesome 51. Hats off to you outstanding work thank for showing.
Such a unique build, such a. Great channel… I watch because Brent is a master figure outer.. he masters all that he builds, then simplifies it for us. Way cool with way cool dogs , music and great drone views. Now that is very unique. Thanks for sharing your talents. Alberta Dave
This truck is looking cool!!!!
AND it has a new home!!!
Damn I wish I lived near you..! I'd buy that van straight away..! You use a zip cutter and torch as easy as I use a knife and fork..! Amazing skills....
You make it look so simple! Well Done.
Keep up the good work Brent, so good that you are able to revive these iconic old vehicles as well as salvage modern viable running wrecks. To me, it's 2 saves in one. Thanks for sharing.
👍🏻Awesome job!!! Thanks again for getting another one back on the rode again!!!
This channel is my number 1 fave now .It used to be Andrew Camarata, but he is number 2 now as he doesnt put out as much content as he used to. This channel is tops as the content is great and easy to follow and plenty of uploads.
I'm gonna miss this one. I've a soft spot for this style of vehicle.
yes i will tooo it was a good one
Great rehab job hope the guy does a nice finish job to it maybe they can send you a finish photo of it to show us ,looking forward to the next build thanks for the video from Prescott, Arizona USA, stay warm this winter my friend!
I really liked this one. Glad it was sold before i found this video.
Sad to see it go so soon! Loved this build. Gave me motivation to start working on the patch panels for my 53 Chevy pickup
Good work , like forever !
Hello from France !
the extra across the front changes the look so much, it now looks so firm footed
That's a really cool rig. You did a fantastic job with another wreck destined for the heap. Someone's next dream rig....take it easy🐾
*- Excellent, Brent. Happy music to start and then you show us how easy all is to do.*
Brent, terrific content in these videos. I learn something new each time.
Love your property and content. Thanks for sharing!!
Like this truck ! Hope it finds it's way to somebody who can take it a bit further !
I'd love to have it! That buyer is gonna be pleased with it! Can't wait to see your next project! ✌🏻🇺🇸🇨🇦
Nothing worse than whiny people on the internet shoot about it if you going to whine about it
@@hcovell6899 HUH?
Totally agree 💯 percent! So wish I lived closer I'd definitely be willing & Proud to buy anything Brent built!
Loved this build Brent. I’d be proud to own that panel. Sounds like a lot of people would. Anxiously waiting for your hot rod build. Thanks for sharing.
👊😀👍
This afternoon I happened to see Chev panel truck. Neat body. Copper color. Real nice
Brent, this is going to make someone an awesome build. Nothing like an old panel truck… Keep up the awesome work!!!
I came in After shoveling snow 2 x's and this is a much deserved rest and pit stop.
Thanks for sharing Brent !
If you don't have any by today, look out it's coming your way .
Take care , Blizzard here oh JOY !
Grew up in the St. Louis Missouri area and the youngest of 6 kids. Watched and helped my older brother rebuild a couple of those old panel vans/trucks in my younger years. You sure made that frame swap look easy with the hydrolic lift you have. You have definitely mastered the art of spotwelding. GREAT looking start on a never-ending project. Congrats on the sale of that old suburban. Cheers
Congrats on the quick sale, Brent!
Sure wish I could afford to buy that ole truck love IT great job Brent .sucks being on a fixed income
Good music, good episode, and I always learn something ... doesn't get any better than that!
another great delivery wagon great job
Really nice lines, I was wrong about the height, well done, cheers
The music is really great. Hot Rod build sounds like a win.
Gosh Brent, she sure seems like a keeper to me. Great video!
Another great video but I love that 5 window coupe blue truck it doesn't look that bad . Could it be saved if someone was to put a newer truck under it and fix the fenders lol . Keep up the great work and God Bless you and your family Brent I love your videos and your a laid back cool guy also plus i love pablo too. 💯💪🏼👍👍🙏🙏✌😊✌
Haha yeah that one needed more love than I'm willing to give it
I like the way Brent has no fear using the grinder no bad cuts ha ha cannot wait for next project 🇦🇺 👍👍👍
Thanks for the compete videos, again im inspired even more to start and complete my 1970 made in Canada Manic G T
Great project, Brent! Yeah those box side spares were a common thing back then by all truck manufacturers. Also affirm your music choice. Blends perfectly with the work you do.
One of your most beautiful projects! I love this van!😍
Had one like it, great series, Enjoyed every minute. Sir you have a gift for Fab work, cant wait for the next one.
Awesome Work ALL ROUND Brent, Glad You Got What You Were Asking For It. God Bless All.
Good a new Hotrod build, greetings from Bonnie Scotland. 👍
As usual sir. Great Job!
Would love to own it.
I noticed another channel decided to pull a truck to get it to break free. They gave you all the props for learning that from your channel!
Looks like a New DeWalt metal grinder. Quicker cuts, less walking around... Love those old Chevy Panels....
As always, really enjoy your videos, thanks
You make it look so easy It looks awesome
Must be nice to have a yard full of parts and projects !
another job well done so this one sold their new owner going to finish off the floor in the rear of the panel truck sure one long truck nice work...
Excellent video Brent :) also glad how turn out for you and sold very quickly too !
I know you don't love it, but I think it is seriously cool. I hope the new owner finishes it and uses it a lot.