Evan, I barely subscribe to anyone on TH-cam because of sooooo much junk. Your videos are ON POINT and I'm a fan so I subscribed. One request for us broke musicians, Can you recommend another battery charger that's a lot more affordable to code my E90! Thank you again for sharing straight forward videos!
I know this video it old, but it helped me immensely. My EKPMS module overheated and I bought a replacement. I was able to drive the car without coding the module, but I did not like the way the car shifted and at certain points, there was lack of power. To avoid any damage to the fuel pump or CATs with potential excessive unburned fuel, I needed to code the module. I checked INPA for the EKP module number (7276383) and I noticed it had another VIN number assigned to it. I followed your tutorial and I was able to successfully program the module and add my VIN to the module. The key is, you need the SP-DATEN files. I was able to find the most recent Daten files, 7.0 and 7.1. I believe they stopped updating the Daten files at version 6.5, but anything after 6.5 will be the same, which will work. Used BMW Coding tool to update NCS Expert, EDIABAS and WINKFP and pointed WinKFP to the latest SP-Daten files. Thanks for the tutorial! There aren't many videos that explain in detail. This video is the best I was able to find. Thanks!
@ yes. The DME is assigned to the VIN. The VIN needs to be registered in order to recognize the module. It might work without registering but the fuel dispersement will not be accurate. Then you’ll ruin your CATs.
Just stumbled onto your TH-cam videos... subscribed and ordered your INPA cable from Amazon… My 330ci recently had the cluster go so I bought another from a wrecker but now had these warning lights appear even though I had none prior to the cluster change. My small cheap OBD2 scanner shows no codes so I had a BMW repair guy (not the dealer) scan it and he said there were some after-market component changes that the car didn’t have registered as OEM but he didn’t know how to clear them (the emergency brake light runs yellow). My questions are, can the INPA software: 1. Clear the error lights (ie: change program for registered components)? 2. Reset the mileage dot due to cluster change? Many thanks, Joe
Nice instructions. I followed your instructions , but when I go up update ecu in winkfp, nothing shows and the list is blank. I had to change airbag control module under the glove compartment and steering angle sensor. Do you have any suggestions? I appreciate it.
Hi Evan, Great videos! I wondered if you knew how to update a ULF Telephone module on a X5 E53 to latest 13th generation? Look forward to your reply please. Thank you!
hi, i"m working on a 2008 e70 x5 4.8i, trying to change the vin on the ccc head unit to match, how do you know which ecu family to choose? is there a list with a brief description of it? Anybody?
Great video! Could you help me, how to change temperature units from Fahrenheit scale to Celsius in INPA? Speaking of automatic transmission temps to be exact. :)
Hello, great tutorials. Can i ask u, i have probably bad chip in my vehicle e46 330d 150kw from before owner. Can i reflash ecu with winkfp to original 150kw software/map? Thanks.
Hi evan, thank you so much for your videos! My bmw 1 series just fried its second JBE unfortunately 😑 do you know how to code replacement JBE? And how do I know I'm buying the right replacement?
good night I need help I replaced the Bosch vp44 injection pump of my bmw320d e46 for another one used as I do for the synchronization with the ECU I have the ista-p program thanks
hello friend i know im here a little bit years after but i need your help, i have a bmw e46 2002 318i n42b20 engine, but i noticed that the modules was changed, the ike cluster and the light module lcm has the info about a 330ci and different vin, so the abs module as well, and the ews also i remember, how can i get all modules in order? looks like only the gearbox has the info correct, with this tools can i do it? i tried to code with ncs expert in expertmodus the abs module but dont show in the list to code, i have been seen a lot of videos of abs module coding and by now i can coode the module, so i need to code this and the other modules, because i have some error codes frecuently, the car starts run go and come good but i want it all in order. thank you if you can help me please. thanks
My dad hooked up power cables in the front and now I'm sure my ecu got bricked. Can I still update or install fresh software on my ecu through this method assuming the ECU is still functional and just got wiped?
Hi, of topic, but maybe you know where can i find obc activation in ncs expert (havent found it in gm5 or lights module)? I installed bc turn signal stalk and i want to activate it on my e46. Cant find it anywhere. its 1999 318i. Thanks
Good question. I too want to know. The charger that looks bad ass from his affiliate link is too expensive for me. I wonder if Evan would recommend something else that's more affordable?
Evan, I barely subscribe to anyone on TH-cam because of sooooo much junk. Your videos are ON POINT and I'm a fan so I subscribed. One request for us broke musicians, Can you recommend another battery charger that's a lot more affordable to code my E90! Thank you again for sharing straight forward videos!
Excellent video mate. Thank you for your honest and helpful service on TH-cam.
I know this video it old, but it helped me immensely. My EKPMS module overheated and I bought a replacement. I was able to drive the car without coding the module, but I did not like the way the car shifted and at certain points, there was lack of power. To avoid any damage to the fuel pump or CATs with potential excessive unburned fuel, I needed to code the module. I checked INPA for the EKP module number (7276383) and I noticed it had another VIN number assigned to it. I followed your tutorial and I was able to successfully program the module and add my VIN to the module. The key is, you need the SP-DATEN files. I was able to find the most recent Daten files, 7.0 and 7.1. I believe they stopped updating the Daten files at version 6.5, but anything after 6.5 will be the same, which will work. Used BMW Coding tool to update NCS Expert, EDIABAS and WINKFP and pointed WinKFP to the latest SP-Daten files. Thanks for the tutorial! There aren't many videos that explain in detail. This video is the best I was able to find. Thanks!
The VIN really made a different to the fuel pump operating properly?
@ yes. The DME is assigned to the VIN. The VIN needs to be registered in order to recognize the module. It might work without registering but the fuel dispersement will not be accurate. Then you’ll ruin your CATs.
Great video my dude lots of good info.
Just stumbled onto your TH-cam videos... subscribed and ordered your INPA cable from Amazon…
My 330ci recently had the cluster go so I bought another from a wrecker but now had these warning lights appear even though I had none prior to the cluster change. My small cheap OBD2 scanner shows no codes so I had a BMW repair guy (not the dealer) scan it and he said there were some after-market component changes that the car didn’t have registered as OEM but he didn’t know how to clear them (the emergency brake light runs yellow).
My questions are, can the INPA software:
1. Clear the error lights (ie: change program for registered components)?
2. Reset the mileage dot due to cluster change?
Many thanks, Joe
Great video, happen to have any videos with how to change a vin and restart system time on a used SRS/airbag module?
Hey Evan! Is there a video on how to update SP Daten files?
Great Upload 🔥
Thanks!
Where is the link for the power supply?
Thanks a lot for the video!!
Nice instructions. I followed your instructions , but when I go up update ecu in winkfp, nothing shows and the list is blank. I had to change airbag control module under the glove compartment and steering angle sensor. Do you have any suggestions? I appreciate it.
You need to update sp daten files
@@EvanGoyuk thanks so much for replying. I am going to try that , I don’t know how but hopefully I can figure it out. Again thank you
I can help remotely
@@EvanGoyuk I appreciate it.
@@EvanGoyukhi mate could you please help me with how I get the essambly file
Sp daten from my impa or I should download it
Thanks
What are the advantages to update to the latest DME?
great video thank you for your expertise
Hey i have a bmw x5 e70 2012 n55 i want to do this procedure on my car does this improve like performance updating all modules ?
Hi Evan,
Great videos!
I wondered if you knew how to update a ULF Telephone module on a X5 E53 to latest 13th generation?
Look forward to your reply please.
Thank you!
hi, i"m working on a 2008 e70 x5 4.8i, trying to change the vin on the ccc head unit to match, how do you know which ecu family to choose? is there a list with a brief description of it? Anybody?
Great video! Could you help me, how to change temperature units from Fahrenheit scale to Celsius in INPA? Speaking of automatic transmission temps to be exact. :)
My car has the correct units for me, but INPA shows F instead of C.
I,have DSC modul 6769703 in the car. INPA can see wrong number. INPA sees 6769705 - last number is wrong. Is it possible to change it ?
Hello, great tutorials. Can i ask u, i have probably bad chip in my vehicle e46 330d 150kw from before owner. Can i reflash ecu with winkfp to original 150kw software/map? Thanks.
Hi evan, thank you so much for your videos!
My bmw 1 series just fried its second JBE unfortunately 😑 do you know how to code replacement JBE? And how do I know I'm buying the right replacement?
You know how to get the e46 smg csl daten files
Hello, can i make software update on ECU , car is e46 with n42b20 following those steps in video?
I have the same engine, did you made any software updates?
Hello could you update your engine?
@@Pantzoulishello could you update your engine?
@@rikymalone no i didn't anything yet and i didnt found something
good night I need help I replaced the Bosch vp44 injection pump of my bmw320d e46 for another one used as I do for the synchronization with the ECU I have the ista-p program thanks
Inpa can do this
Thanks
good night could you explain to me step by step greetings
hello friend i know im here a little bit years after but i need your help, i have a bmw e46 2002 318i n42b20 engine, but i noticed that the modules was changed, the ike cluster and the light module lcm has the info about a 330ci and different vin, so the abs module as well, and the ews also i remember, how can i get all modules in order? looks like only the gearbox has the info correct, with this tools can i do it? i tried to code with ncs expert in expertmodus the abs module but dont show in the list to code, i have been seen a lot of videos of abs module coding and by now i can coode the module, so i need to code this and the other modules, because i have some error codes frecuently, the car starts run go and come good but i want it all in order. thank you if you can help me please. thanks
My dad hooked up power cables in the front and now I'm sure my ecu got bricked. Can I still update or install fresh software on my ecu through this method assuming the ECU is still functional and just got wiped?
Message me I can help fix this
Will a Schumacher SC1280 15A 6V/12V do the trick?
Hey man, can you please help me... I wamt to update some modules like GM, LSZ.... If it is possible
Can you write the ISN as well? I am trying to sync my MINI with DMW and CAS. Thank you.
You can’t write the ISN however if the dme and CAS have the same isn you can sync the rolling codes with inpa
Message me on Instagram @evangoyuk I can help
what is ISN
hi;for bmw e46 ,dsc5.7 module can be update ?
Hi, of topic, but maybe you know where can i find obc activation in ncs expert (havent found it in gm5 or lights module)? I installed bc turn signal stalk and i want to activate it on my e46. Cant find it anywhere. its 1999 318i. Thanks
Do you do remote work
How can i check if my DME has stock program or a tune on it?
Whats the minimum Amperage you need to provide battery?
Good question. I too want to know. The charger that looks bad ass from his affiliate link is too expensive for me. I wonder if Evan would recommend something else that's more affordable?
Where do I get the files for update I’m confused
i need help reseting my frm module on my 2010 bmw 328i xdrive. can anyone help me
do you need an active internet connection during the update?
No
Where can we get the update files?
Hey awesome video, sent you a message thru instagram