ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Best how to video on this procedure so far
Thank you
Thanks for uploading this tutorial. Makes it look oe with the connectors.
Your welcome
Got mine put on seemed to pickup about 200 rpm ,s with it 07 with 30,000 miles on it ,maybe I had a small leak great video!!
Exactly what i needed! Thanks
I'm glad I found this video! Thank you!! 👍🏼 I'll be doing this to mine, how is it working out for you to this day?
Thank you for this 🙏
Thank you very much looks great,,, this is definitely how I'm running mine,,,👍👍👍
Best video I’ve seen
I seen a bunch of videos and hits the one actually shows how to take off the PCV valve....
You should do the other side too, your engine will Love you for it.
Sold the truck
I was just thinking that question or statement! How often do you empty the cans? How to do the other side?
Thanks, your video helped me on what and how to remove the pipe. I just ordered an Moroso can. They have a built in bracket and a drain valve underneath.
Great video. I'm going to buy the speed engineering can and install after this hurricane stuff blows over
Thank you as long as it has a baffle in it your good
Thanks a lot man. Just like you said straight forward!!!
will it work with 4.8L sliverado 2010? And link for the oil catch can and mounting kit
Thank you! Simple and right to it.
No problem glad I can help
Does your oil level stay the same between oil changes ? Thanks
How often do you drain your catch can and does it waist more oil than before
How often do you check it and how much does it collect? Thanks for the great video!!
Every month or when I pop the hood
@@normanlloyd744 How much fluid does it tend to collect?
@@jockosboy17 pretty good amount about 1/4 full every time I check it
If your truck doesn't burn oil you wouldn't need this Right
Damn you lost me at 10mm, really wanted to do this too
What you lost about? Bolts hold the cover on are 10mm
So if the dipstick is out of the can, will you hear it sucking air ?
Awesome video! What's the hose size for catch can to truck?
3/8
Question, did it run fine on the start up??
Ran alil weird at 1st but nothing you should notice
With that tool u cut the pcv line ??
Can I use 8an hose with the piece I gotta cut to make it plug and play
so IN from the valve cover OUT to the intake manifold ?
That's what he said
Where did you get that bracket? Also how is the truck doin with the catch can are you pulling a lot of gunk
Mine doesn't have a click fitting on the back just a hose Barb 07 Chevy any thoughts
Just use a clamp make sure it's tight
Can you post a link with the can with a baffle maybe a red or blue one
What size is the rubber hose
I see you upgraded your throttle body to a ls3 you should make a video of it.
Man it's plug and play no video need
@@normanlloyd744 is it better than stock Tb?
Which fitting did you use out of the two they send for the catch can?
@@ronieramirez4842 if you get in tuned yes
Great video thank for posting were did you say you bought it
Was bought off ebay from speed daddy no idea where bracket came from
@@normanlloyd744 Thank you...
@@normanlloyd744 It came with the bracket..?
Excellent
does the can come with bracket
What kit did you purchase because I cannot find a kit with your specific mounting bracket in the video? (Awesome step by step video.)
Just a bracket I found laying around
Do you still have the part numbers for the quick connectors by any chance ?
you ever figure this out ? wondering same thing
Would this work for a suburban same motor and year
It should
Thanks. Mine came with no instructions
You got a link to that one????
Whats the name for the hose, oil catch can hose isnt the name for this hose i cNt dind it anywhere
Get went to auto parts store had them cut me some the size needed
How do you drain? Thanks!
It unscrews so you can drain it
Where did you get the bolt you connect on to the alternator?
Just a normal bolt I had believe was a extra grill bolt
Norman Lloyd ok cool before the install did your truck have any rough idle at all?
@@j2remmy4 no sir only did that when my throttle body needed to be cleaned and relearn from the dealer
Norman Lloyd ok thanks
What oil catch can did u use?
Cheap baffle Ebay one
What brand catch can is it?
Speed daddy on ebay
Where did you get the bracket?
Just something I had laying around
Thanks man just did mine on my 07 today.
What about the other side
Didn't do it no reason to unless u pushing alot of hp
What size hose did u use
Will this work on a 4.8L
Yes it will
Best how to video on this procedure so far
Thank you
Thanks for uploading this tutorial. Makes it look oe with the connectors.
Your welcome
Got mine put on seemed to pickup about 200 rpm ,s with it 07 with 30,000 miles on it ,maybe I had a small leak great video!!
Exactly what i needed! Thanks
I'm glad I found this video! Thank you!! 👍🏼 I'll be doing this to mine, how is it working out for you to this day?
Thank you for this 🙏
Thank you very much looks great,,, this is definitely how I'm running mine,,,👍👍👍
Best video I’ve seen
I seen a bunch of videos and hits the one actually shows how to take off the PCV valve....
You should do the other side too, your engine will Love you for it.
Sold the truck
I was just thinking that question or statement! How often do you empty the cans? How to do the other side?
Thanks, your video helped me on what and how to remove the pipe. I just ordered an Moroso can. They have a built in bracket and a drain valve underneath.
Great video. I'm going to buy the speed engineering can and install after this hurricane stuff blows over
Thank you as long as it has a baffle in it your good
Thanks a lot man. Just like you said straight forward!!!
will it work with 4.8L sliverado 2010? And link for the oil catch can and mounting kit
Thank you! Simple and right to it.
No problem glad I can help
Does your oil level stay the same between oil changes ? Thanks
How often do you drain your catch can and does it waist more oil than before
How often do you check it and how much does it collect? Thanks for the great video!!
Every month or when I pop the hood
@@normanlloyd744 How much fluid does it tend to collect?
@@jockosboy17 pretty good amount about 1/4 full every time I check it
If your truck doesn't burn oil you wouldn't need this Right
Damn you lost me at 10mm, really wanted to do this too
What you lost about? Bolts hold the cover on are 10mm
So if the dipstick is out of the can, will you hear it sucking air ?
Awesome video! What's the hose size for catch can to truck?
3/8
Question, did it run fine on the start up??
Ran alil weird at 1st but nothing you should notice
With that tool u cut the pcv line ??
Can I use 8an hose with the piece I gotta cut to make it plug and play
so IN from the valve cover OUT to the intake manifold ?
That's what he said
Where did you get that bracket? Also how is the truck doin with the catch can are you pulling a lot of gunk
Mine doesn't have a click fitting on the back just a hose Barb 07 Chevy any thoughts
Just use a clamp make sure it's tight
Can you post a link with the can with a baffle maybe a red or blue one
What size is the rubber hose
I see you upgraded your throttle body to a ls3 you should make a video of it.
Man it's plug and play no video need
@@normanlloyd744 is it better than stock Tb?
Which fitting did you use out of the two they send for the catch can?
@@ronieramirez4842 if you get in tuned yes
Great video thank for posting were did you say you bought it
Was bought off ebay from speed daddy no idea where bracket came from
@@normanlloyd744 Thank you...
@@normanlloyd744 It came with the bracket..?
Excellent
does the can come with bracket
What kit did you purchase because I cannot find a kit with your specific mounting bracket in the video? (Awesome step by step video.)
Just a bracket I found laying around
Do you still have the part numbers for the quick connectors by any chance ?
you ever figure this out ? wondering same thing
Would this work for a suburban same motor and year
It should
Thanks. Mine came with no instructions
You got a link to that one????
Whats the name for the hose, oil catch can hose isnt the name for this hose i cNt dind it anywhere
Get went to auto parts store had them cut me some the size needed
How do you drain? Thanks!
It unscrews so you can drain it
Where did you get the bolt you connect on to the alternator?
Just a normal bolt I had believe was a extra grill bolt
Norman Lloyd ok cool before the install did your truck have any rough idle at all?
@@j2remmy4 no sir only did that when my throttle body needed to be cleaned and relearn from the dealer
Norman Lloyd ok thanks
What oil catch can did u use?
Cheap baffle Ebay one
What brand catch can is it?
Speed daddy on ebay
Where did you get the bracket?
Just something I had laying around
Thanks man just did mine on my 07 today.
What about the other side
Didn't do it no reason to unless u pushing alot of hp
What size hose did u use
3/8
Will this work on a 4.8L
Yes it will