Hi sarah. I have brother tendy sewing machine.its model is very exclusive and mostly feet are not available here in our city.. But as much as i could learn from you....its really funn to do with you.thanks u pplz
Hi! It was Clear "monofilament" Thread. It comes in two shades - clear and smoky. Smoky works well with dark colors. Clear thread also works well with a Metallic Needle. If you go to our site and type "Clear Thread" in the search box, an example of monofilament thread will pop up. Happy Sewing!
It can accommodate a wide variety of decorative materials as long as it can fit through the groove on the bottom of the foot. For example, in the description of part number XA7874002, it states, "Pearls and sequins are just the beginning, you´ll have many creative options for surface embellishments that can be applied with ease and speed. Attach beads up to 7mm, make and apply piping up to 1/4" in diameter, you can even attach cording and piping! "
To ensure it will fit with your machine, please call or email us with your model number and we will be happy to check. Our number is 888-824-1192. Our email is info@sewingpartsonline.com. We look forward to hearing from you!
Hi Kathy! You can use the same presser foot on barbie clothes. However, depending on what machine you have, you may need a special plate to keep the fabric from getting jammed in the feed dogs. Would you mind telling me the make and model of your machine? I can double check for you.
Hi Kathy! I did some research - it looks like a straight stitch needle plate and a 1/4in foot are especially helpful when sewing barbie clothes. I'l searching for the needle plate now. Do you have a 1/4in foot?
i bought this foot after watching this video. the fabric puckers when I use it with beads even on the loosest tension and longest zigzag stitch. please help!
Would you mind sending me an email with a picture of your puckering fabric? We may have to go over a few different things and I feel I can best assess by looking at it. Our email is info@sewingpartsonline.com - Looking forward to hearing from you!
Hi Sarah, I'm new to sewing, I have a Brother LX3125e and I'm wondering if the Pearls and Sequins Foot would fit my machine, it looks like it will as is a snap on but I'm not sure. I would really appreciate your help. Thank you.
Hey Sarah, Just a quick question...I understand that I must adjust the zig zag stitch and the tension but do I need to adjust the stitch length as well?? I have a Brother sewing and embroidery NV 500d it's old but works wonderfully. It uses the SA150 Pearls and Sequins foot too. In the instructions for this foot it states no more than 4mm. And I have learned from trial and error that it will only sew round pearls not the ones that are flat on the bottom. I have tried them and it gets jammed and stops feeding. Any thoughts on that?? What is the size you are using for your demonstration?? Love you tutorials. Learn so much more from you then the manuals. Thank you :-)
Hi dmaria0282! Hmmm, I haven't tried the flat back pearls. It's interesting that they don't work - you'd think flat back would be even better. I'm curious to try myself - do you have a link to the string of pearls you are using? I don't have that pearl trim anymore, but I'm pretty sure they were 3mm pearl beads. You don't have to increase the stitch length if you don't want to, though if you are experiencing issues, I would try it for larger beads and reduce for smaller beads.
Thank you Sarah, You are such a pleasure. You're very helpful and much appreciated. You are so busy but take the time to actually respond to the many questions and comments you receive. Thank you again :-)..And yes, I am a very big fan of yours. You helped me to remember how to install a zipper. You a" Diamond among Gems" BTW I think I had bought them from JKM Ribbon and Trims. But it was a few years ago.. Not sure if they still carry them. Thanks again for all of your expertise..
![Sewing Machine Presser Foot Basics 🧵 How to Use 10 Different Feet [Brother CS7000i]](/img/n.gif)
Thank you, thank you, thank you! There aren’t many people showing this. This is awesome.
I just added a weighted cord to some fine curtains. In the end I found the pearl foot was ideal. Don't just think pearls and sequins.
Best channel to learn hands down
What a compliment! Thank you!
Thank you for sharing this tutorial with us. It seems very easy with the appropriet foot.
Thank you for watching!
Really great video on showing step by step directions, thanks so much..
Hello,
I received a lot of presser foot, thanks for your very clear explanations. kiss from France
your videos are clear and style of teaching is good, keep it up.
Nice teaching thanks
Yes, you can! Just as long as it fits through the groove.
My baby's is my own
Your tutorials are quite helpful and up there with the Professionals. You break it down pretty easily and are thorough. Thank you.
You saved my project! Thank you!!!
Best tutorial all your videos,I’m so glad 😊👍
Wow! I will have to get one! Thanks for posting.
www.aliexpress.com/item/4000378963512.html?spm=2114.12010611.8148356.2.335a745fZIwcQM
Hi sarah.
I have brother tendy sewing machine.its model is very exclusive and mostly feet are not available here in our city..
But as much as i could learn from you....its really funn to do with you.thanks u pplz
Great job!
Thank you for watching!
Wow amazing 😍luv it 🥳👍🏾👏🏾👏🏾👏🏾👏🏾
Wow very very nice one thanks.
Glad you enjoyed!
I love these videos
Thank you for watching!
Very good explanation mam thank you
Hi! It was Clear "monofilament" Thread. It comes in two shades - clear and smoky. Smoky works well with dark colors. Clear thread also works well with a Metallic Needle. If you go to our site and type "Clear Thread" in the search box, an example of monofilament thread will pop up. Happy Sewing!
Sewing Parts Online metallic needle
TY!
beautiful
Thanks so much need to get one of these feet
if I use the some color of cotton thread can I use that instead of that other thread that you said
So does this replace the candle wicking foot and the braiding foot Pearl foot?
Can you use this foot to put elastic in...Also does this foot fit a Singer heavy duty machine
you are great and cute girl
thank you for your ideas
up to a 1/4 inch thick.
What kind of thread was the one you recommanded atnthe beginning?
Can we use it as a applique foot too ?as it has a wide opening
Yup, you can use this with the feed dogs down.
Very nice videos what's the difference with a quilt foot presser and a walking foot low shank
can we use pearls of our choice attached in a string instead of a pearl thread available in market?
I would like to buy a pearls and sequence foot for my brother machine but I cannot find one. Is there a good place to purchase?
Could I use this attachment to sew a 2 row rhinestone chain on?
It can accommodate a wide variety of decorative materials as long as it can fit through the groove on the bottom of the foot.
For example, in the description of part number XA7874002, it states, "Pearls and sequins are just the beginning, you´ll have many creative options for surface embellishments that can be applied with ease and speed. Attach beads up to 7mm, make and apply piping up to 1/4" in diameter, you can even attach cording and piping! "
What machine do you use?
Do you have a book for sale to show you how to use the feet and what they are for thanks love your video.
Hi Kathy! Thank you! I don't know of a book with each foot and instructions, unfortunately. Is their a specific foot or task you are think of?
I would suggest the Sewing Machine Accessory Bible: Get the Most out of Your Sewing Machine. Check Amazon.
What"s the max size pearl you can use with the foot?
up to 7mm for beads and apply piping up to 1/4" in diameter.
hi I used the same foot but the bead thread is larger in size so when foot is pressed down it pops out. is there anyway I can adjust the foot?
Hi, Upeka! Unfortunately, the channel of this foot cannot be made larger.
nice mam, I subscribe and like your video, thank you
Can it be used for singer talent
To ensure it will fit with your machine, please call or email us with your model number and we will be happy to check. Our number is 888-824-1192. Our email is info@sewingpartsonline.com. We look forward to hearing from you!
what is the difference between this and the fashion sequins foot?
what's the biggest size pearls you can use?
I am looking for a foot to sew barbie doll clothes do you no which foot i can use thanks.
Hi Kathy! You can use the same presser foot on barbie clothes. However, depending on what machine you have, you may need a special plate to keep the fabric from getting jammed in the feed dogs. Would you mind telling me the make and model of your machine? I can double check for you.
ser no. is U61530-C4G126810
CS-600i sewing machie
Hi Kathy! I did some research - it looks like a straight stitch needle plate and a 1/4in foot are especially helpful when sewing barbie clothes. I'l searching for the needle plate now. Do you have a 1/4in foot?
Hi, could this foot be used as a couching foot also?
Love your tutorials & often refer to them thank you!
Cheryl Olsen Hi! You could definitely use it to sew on yarn, but it won't look exactly like couching. It will look very similar.
Thank you
Sewing Parts Online hi, can you tell me which brother machine can do
What type of needle is used for the sequins? Anything special or a standard?
To attach the sequins ribbon, I used a top stitching needle with the embroidery thread and a metallic needle for the clear thread.
Whats the name of the thread you said should be used?
Monofilament Thread: www.sewingpartsonline.com/madeira-monofil-clear-thread-550-yds.aspx
Thanks a million You Explain really well! I have à Pfaff; I imagine it must be similar.
i bought this foot after watching this video. the fabric puckers when I use it with beads even on the loosest tension and longest zigzag stitch. please help!
Do you have a presser foot pressure adjustment knob?
no, i do not
Would you mind sending me an email with a picture of your puckering fabric? We may have to go over a few different things and I feel I can best assess by looking at it. Our email is info@sewingpartsonline.com - Looking forward to hearing from you!
Sewing Parts Online will do!
Hi Sarah,
I'm new to sewing, I have a Brother LX3125e and I'm wondering if the Pearls and Sequins Foot would fit my machine, it looks like it will as is a snap on but I'm not sure. I would really appreciate your help. Thank you.
Hey Sarah,
Just a quick question...I understand that I must adjust the zig zag stitch and the tension but do I need to adjust the stitch length as well?? I have a Brother sewing and embroidery NV 500d it's old but works wonderfully. It uses the SA150 Pearls and Sequins foot too. In the instructions for this foot it states no more than 4mm. And I have learned from trial and error that it will only sew round pearls not the ones that are flat on the bottom. I have tried them and it gets jammed and stops feeding. Any thoughts on that?? What is the size you are using for your demonstration?? Love you tutorials. Learn so much more from you then the manuals. Thank you :-)
Hi dmaria0282! Hmmm, I haven't tried the flat back pearls. It's interesting that they don't work - you'd think flat back would be even better. I'm curious to try myself - do you have a link to the string of pearls you are using?
I don't have that pearl trim anymore, but I'm pretty sure they were 3mm pearl beads. You don't have to increase the stitch length if you don't want to, though if you are experiencing issues, I would try it for larger beads and reduce for smaller beads.
Thank you Sarah,
You are such a pleasure. You're very helpful and much appreciated. You are so busy but take the time to actually respond to the many questions and comments you receive. Thank you again :-)..And yes, I am a very big fan of yours. You helped me to remember how to install a zipper. You a" Diamond among Gems" BTW I think I had bought them from JKM Ribbon and Trims. But it was a few years ago.. Not sure if they still carry them. Thanks again for all of your expertise..
That's mean your needle 💉 should be zig jag position for this function . please reply .🙏
Yes, in order to obtain this look, you will need to set your machine to a zig-zag stitch.
Honestly if you didnt know how to snap on a foot, why would you be looking at this tutorial, lol 😜
Can we attach smaller pearls using same foot......