Nick Agar's Favourite Woodturning Jaws - Woodworking Wisdom

Join Colwin and renowned turner Nick Agar in this special Woodworking Wisdom. Together Nick and Colwin share their favourite Axminster Woodturning chucks and jaws.
#woodturning #woodturningprojects #woodworkingart
AXMINSTER WOODTURNING EVOLUTION SK114 CHUCK PACKAGE - 1" X 8 TPI
bit.ly/3Pm87FY
AXMINSTER WOODTURNING CLUBMAN SK100 CHUCK PACKAGE - M33 X 3.5MM
bit.ly/3sVCEmh
AXMINSTER WOODTURNING WOOD JAW PLATES - 150MM
bit.ly/46cMf6D
AXMINSTER WOODTURNING BUTTON JAWS - 400MM
bit.ly/46cMnD9
AXMINSTER WOODTURNING BUTTON JAWS - 250MM
bit.ly/3sVD8ZD
AXMINSTER WOODTURNING STACKING TURN STUDS
bit.ly/45cQv5n
AXMINSTER WOODTURNING EXPANDING PIN CHUCK JAWS
bit.ly/44W1iRg
AXMINSTER WOODTURNING O'DONNELL DOVETAIL JAWS - 38MM
bit.ly/46iCHXB
AXMINSTER WOODTURNING SK100 DOVETAIL JAWS TYPE C
bit.ly/3sWwSB5
----------------------------------------------------------------------------------------------
SHOP - www.axminsterto...
BLOG - knowledge.axmin...
FACEBOOK - / axminstertools
EBAY STORE - bit.ly/Axminst...
EBAY OUTLET - bit.ly/Axminst...
AMAZON STORE - bit.ly/Axminst...
CALL (UK) - 03332 406406

[@penchant4]

Such a pleasure to see these two gentleman turners discuss the subject. Thank you.

[@martinkavanagh5928]

Well presented and informative giving plenty of uses for many jaws thanks guys

[@chrisjordan4210]

I have a 100mm Clubman chuck with C jaws that always stay secure, but whenever I use my O'Donnell jaws (610356) the cap head screws seem to work loose no matter how well I align the jaws before tightening, any advice?

[@axminster]

Hi there. Colwin suggests tightening the screws off of the chuck i.e. attach the O'Donnels onto the mounting jaws, as you can get a better grip with the alan key, also add a dot of oil or grease to the thread as this will help it bed in. Hope this helps

[@chrisjordan4210]

@@axminster I always fit the jaws with the chuck off the lathe and use the same screws as the C jaws, but I will give the oil a try, thanks for the tip.

[@erictownsend4236]

What Lathe brand and model do you use in your video's?

[@axminster]

We mainly use the Axminster Professional AP406WL - this is available as bench top for floor standing www.axminstertools.com/axminster-professional-ap406wl-floor-standing-woodturning-lathe-230v-720773

[@harveyklein9471]

Hi