ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
5g Pipe Welding Downhill Root 6010 API 1104
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- read the full article here www.weldingtips...
For this video, Andrew Cardin welded a 12 inch pipe with 30 degree bevels using 5/32" 6010.
The last section of the video is a review of practicing root passes on plate downhill, and overhead.
Subscribe to my channel for more weekly videos.
www.youtube.co...
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
see the full detailed article on my web site www.weldingtips...
For even more options, check out my Amazon recommended products page at www.amazon.com...
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...
Thanks man, my bro watched and learned from you. At the age of 57 we lost him to many cancers. Thanks for making his days easier. Thank you.
These videos are what people need. Some machine ball park settings, type of rod and size to use, and more, all in a video to inspire people!
Thanks guys,
Bill
I really like the picture in picture snippets.
Maybe an arc shot on the main screen and a body position shot in the small screen to see how he's positioned 👍
Jody and Andrew, thanks for another great video and your time ! Be blessed you guys!!
Oh and Jody, only 1yr of your videos left to watch and I can start all over again , man they’re great!!!
you have the best arc shots of any welding channel. love the content man keep it up. you've helped me out a ton with my ironworkers apprenticeship
thanks old friend...great stuff...a fan from 2009
Great video and information, you guys make all this stuff look easy!
Hello and thank you from germany for this and all the other Videos !!! 👍
Nice Jody n weld tube need to do something together
4 people disliked it? Better to stand out somehow than not at all i guess. The weld monger tig gloves are great but they do run large. Thanks for the vids. I always learn something.
As always great videos, have you ever done a pipe test on schedule 80 2” pipe using 7018 only for root fill and cap.
Saludos desde méxico gracias por el contenido
Thank you Jody...learning
As you use a point your rod at the centre of the pipe for pipe welds. This don't seem to translate to the flat plate welds which have a fair drag angle. Is there any good reason the 90 degree angle don't work on the flat plate welds?
Beautiful camera shots
I be takin my national competency test 2 for SMAW and thats for 6g pipe, and im still forgetting the diff between 6010 and 6011
Off topic but what is the maximum metal thickness you would weld short circuit with?
Thanks Jody
Again very impressive Welding Jody would you happen to have any 6 inch schedule 80 6010 Open Rd. open and 7018 feeling cup in the 5G position videos?
In my experience the 5/32" bead tests I've seen, the inspector wanted a penney gap penney land. Stay safe brother.
Root face 1/16 +or -1/32 gap 1/16 +or 1/32
It’s preference for the welder not inspector . As long as it’s in the procedure . You can do penny and and gap or 3/32 or 1/8 .
So why do you weld pipe vertical down and not vertical up? How do you stop slag inclusion ect? thanks.
What is the reason for not whipping the puddle back and fourth compared to just running a straight bead? Is it due to the fact that it’s downhill pipe
Good lesson
Set me up with a drag race with him. Only time I have had to put a 5/32 bead in was on hard pipe. You can cram it unless you want iu. I can half his time with a 1/8th bead rod.
1/8th anyone can
“Hey it’s ya boi Juicebox” 😂😂😂😂
Evey time I try welding pipe at school I use a 3/32 6010 and it just blows all the way threw the bevel and it makes a key hole but it just keep getting bigger and I have to stop. Please give me some advice our welding instructor shows us absolutely nothing he expects us to learn all on our own I guess, is that normal of a welding instructor? Great videos by the way they have taught me alot, thank you.
Wesley Jennings set your amps around 75 and push that rod in the bevel, short arc it when the keyhole getS too big. Maybe find a new welding instructor, sounds like he just wants a paycheck!
Bob i hope you reply my comment .how about 6011 rod is always good use in downhill??
great video, thanks for the lesson..
Super ! Super ! Thank you so much !
How much amps is good for that thickness of the plate to make a root pass?..
Can you or have you done a video on setting up a plasma cutting machine and everything to get cutting, from what type and the air compressor
He has a pretty good pod cast on getting set up in plasma cutting with a CNC machine. Lots of it carries over into doing it by hand with out a CNC table
Can you do some outside corner stick welding, would like to see it with 7018.
Thanks for the video. Any chance you could do a video for downhand fill and cap please🤗?
I see a lot of trash going into the pipe. How do they go about cleaning out the pipe once it's closed up.
Sometimes it is done with compressed air and rupture disks, quite a thing to see. When that disk gives way it will scare the sh!t out of you. You won't believe what comes out, particularly on a new install.
Great video!
thank you .
best colour arc shots
Schedule?
Juicebox? Hes FIRED!
Videos with juice box are always good
Blue hold on Warning 's hit welding down pass?
Esab don't sell those migs in single phases in the U.K. I dont know why ☹️
About the 1/8 rod how many amps, 16gap 16land
Is that a fixed shade or an autodarkening lens in that pancake hood?
Wouldn’t it be nice if the Tig fingers came in a mitt or glove to protect the knuckle
excelent lesson
Looks like his keyhole is smaller than the diameter if his rod. Very interesting.
Can you review kemppi mig fast pulse please?
Thanks :)
I just love this craft so much,, see here my country will be paying welders almost HALF, of what im making with my current line of work but, yall know what? Im still taking welding job once i get my certificate, and thats for sure... I dont know... maybe i just love playing with fire... There's this satisfaction or maybe an addiction i have for it...😂😂
👍 thanks!
Good 👍🏼👍🏼🙏🏻💐💐
Super sir
Jody can you do a 6" pipe in 2g tig with the laywire technique.
i will put it on the list
@@weldingtipsandtricks thanks jody i beleive it would be a good tutorial because there is not much out there theres alot of backfeeding jody you like backfeed?
Why do pipe welders wear the different style of welding hood?
c&r performance Tucker keep the sun from backlighting inside the hood.
Excelent jog, a good video
Good morning teacher, I want to work for you. I want to emigrate to your country. Do you work for all your respect and appreciation
I'm also APL 1104 welder in Pakistan
rigid rocks
I d like to learn from you ✅✅✅✅✅✅✅
Jody, will you be doing anything when you reach either 670k subscribers or 700k subscribers?
Thank you.
👍🏻
Solid:)
Order # 52574 whats going on?
Добавьте перевод на русский
Juice box!!
👍💯✌
the bigger the glob, the better the jobb.
나이스가이
👍👍😍
This guy is an amateur he would never make it on the mainline
It's a demonstration video, not production. Andrew might be young but far from an amateur. I believe he placed 5th in the world skills competition several years back, which is a lot more involved than just downhill pipe.