Saya senang menonton video anda ,dan saya sangat terima kasih karena ada ukuran2 nya .👍. Berharap dalam pembuatan rc selalu disertakan ukurannya Salam terbang dari indonesia .sehingga saya dapat membuatnya juga Terima kasih,🙏
Saya sangat senang Anda suka menonton video saya dan itu membantu Anda dalam membuat Pesawat RC. Akan terus membuat video seperti itu untuk Anda. Salam 🎉
Oh nice. But if you are a beginner and want to make your first ever plane, then I will recommend this one below because its more easier to fly for beginners th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=sMvWnss7PRCnwmSJ
Hello AK , I made this plane and had maiden flight yesterday and really it was very nice flying with this trainer model , I am very happy I could fly it well 1st time my confidance is now up ,yes I can fly a plane ,Thanks a lot
Built basically the same plane. Hadn't flown anything in 18 years. Went pretty much like it did here. Did damage the fire wall, but came home still in one peace.
@@Rudy32225 you are right. But I just use it to try to make the videos better and so that you are not bored while watching. I will turn down the volume o0f music in future videos. Hope it helps.
Aileron ko measurement video mein hain. Aur dihedral shape compulsory nahi hai. Lekin agar dihedral kar lo to thora sa stable fly karta hai. Baqi ap ki marzi hai.
If you make this plane th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=sMvWnss7PRCnwmSJ , then you will not require depron sheet. Just get some thermocol and make it for cheap. Its your choice by the way.
Wese aap agar beginner ho to mein ap ko pvc pipe ka landing gear recommended karu ga. Agar landing mein expert ho to Steel rod ka landing gear bana lena. Warna hard landings se ye rod bend ho jata hai. Phir is ko baar baar seedha karna parta hai. Ye PVC pipe landing gear ki video hai th-cam.com/video/3dfkjzhCmbk/w-d-xo.html
@@AKElectroDIY no no i aint a beginner but i am bad at cutting parts and i dont have all materials toh mai thoda apne hissaaab se banata hun mera ka shape kuch jyaada hi dihedral shape mei ban gya but its ok i am finished with everthing except the landing gear and the canopy
@@tanujvyas2239 landing gear jo apko easy lage. Wese dono hi easy hain. Lekin pvc pipe wala durable hai. Hard landings se kharab nahi hota. Steel rod wala bend ho jata hai hard landings se.
@@affanshaikh308 Yes I'm from Pakistan. As for India, I have probably heard of some websites that sell depron. You can check robu.in or flyingmachines.in
Sir jo ap na wing ma wood istmal ki ha ais aunchi kitni rakhni ha aur 4.5cm air foil per kat kar lagni ha ya ais ka picha lagani ha wood aur sir wood ki dono side ki aunchi kitni rakhni ha aur bich ma kitni aunchi rakhni ha please sir bata da
G 4.5 cm airfoil per wood lagani hai. Measurements video mein di hui hain. Aur jitni width sides se hai utni width center se hogi. Baqi Ap apne hisab se isko laga sakte hain. Ye siraf wing ko strong banane kay liye hai.
Sir kitana cm sa katna ha auper sa katna ha ya naicha sa katna ya wood ko please explain kar da ma bhi pakistan sa ho please sir ap ki mahar bani ho gi explain kar da
@@MUHAMMADASHFAQ-n7p2g mein ne wood ka scale/ruler use kiya hai. book shop ya karyana store se easily mil jaye ga. 30 cm length hai. baki details video mein di hui hain. Agar koi question ho to pooch sakte hain.
@@MUHAMMADASHFAQ-n7p2g length jo scale ki hai wohi rakhni hai. Mere ki 30 cm hai. Aur 3mm neechay se katna hai. Is ki dihedral shape banani hai. Kaafi simple hai. Dihedral ka matlab hai wing thora sa uper hota hai sides se
Saya senang menonton video anda ,dan saya sangat terima kasih karena ada ukuran2 nya .👍. Berharap dalam pembuatan rc selalu disertakan ukurannya Salam terbang dari indonesia .sehingga saya dapat membuatnya juga Terima kasih,🙏
Saya sangat senang Anda suka menonton video saya dan itu membantu Anda dalam membuat Pesawat RC. Akan terus membuat video seperti itu untuk Anda. Salam 🎉
Yes ,senang mendengarnya . 👍 Mantap@@AKElectroDIY
I also watch @kendin yap rc trainer plane video and i also decided to make this plane
Oh nice. But if you are a beginner and want to make your first ever plane, then I will recommend this one below because its more easier to fly for beginners
th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=sMvWnss7PRCnwmSJ
very good work
@@jeriesmarjieh5862 thanks
Hello AK , I made this plane and had maiden flight yesterday and really it was very nice flying with this trainer model , I am very happy I could fly it well 1st time my confidance is now up ,yes I can fly a plane ,Thanks a lot
Oh nice! Glad to hear this!
Can you share with me your build?
@@AKElectroDIY yes , i can share flying video too but i dont know here how to share video and pic
Kindly share on messenger. Link in bio
@@AKElectroDIY Ok
Built basically the same plane. Hadn't flown anything in 18 years. Went pretty much like it did here. Did damage the fire wall, but came home still in one peace.
Right. I actually made it inspired by @kendinyap youtube channel.
Brother, colored tapes were used to strengthen the plan.
Yes they make plane very tough. I will use them in next planes
Cool
Thanks
You should put dialogue over the videos it would make the vids more entertaining for sure. Even if it’s bad id say its probably better than nothing.
I was also thinking the same
Yes, and get rid of the annoying and distracting music. We come to learn something, not listen to music. Silence is better than music.@@AKElectroDIY
@@Rudy32225 you are right. But I just use it to try to make the videos better and so that you are not bored while watching. I will turn down the volume o0f music in future videos. Hope it helps.
You just copied @KendinYap
Yes, I was inspired by him. So I also made that plane.
@@AKElectroDIY Your instructions are easier to follow!
@@johnregan9644 Glad to hear that. Thank you very much! ❤❤
I am also interested in making rc plane
Very good. Its really fun to make and fly rc planes. Good luck.
Thanks
Well done 👍
Thank you very much
@@AKElectroDIY i want to thankyou 👍
sir aliron ka measurements btao pls aur suno dihedral shape compulsory nhi hai na?
thx u i am building this currently
Aileron ko measurement video mein hain.
Aur dihedral shape compulsory nahi hai. Lekin agar dihedral kar lo to thora sa stable fly karta hai. Baqi ap ki marzi hai.
can u tell me the time at when u told it
aliron measurement?@@AKElectroDIY
At 0:23
perfect
Thanks
Brother let me if we can use 5mm craft foam board.Whats the total weight of the airplane after the final finish??
Yes you can use it. Weight with battery wqs approximately 650 grams
@@AKElectroDIYThank you.
Masa koyu renk olsaydı daha rahat izlerdik
Evet haklısın. Artık yeni videolarımda koyu arka plan kullandığımı görebilirsiniz.
Hello, nice video, how is the range of this airplane ?
Thanks. Range is about 1 km
What channel does the throttle use
Channel 3
See this video for complete rc plane connections
th-cam.com/video/opb1-nLrd2g/w-d-xo.htmlsi=67bW5gJ-kBZuTszz
can you tell me where you found the arm clevis and bolt?
I got from an online rc hobby store
thank you
can you send the link too( for the the arm clevis,bolt and linkage stopper)?
Which country you are from?
India
Bro how many depron sheet you use to make this plane
Only one sheet used 4x2 ft
If you make this plane th-cam.com/video/T9jlJCKFaqI/w-d-xo.htmlsi=sMvWnss7PRCnwmSJ , then you will not require depron sheet. Just get some thermocol and make it for cheap. Its your choice by the way.
bhai aapne landing gear ke liye jo rod liya hai uske liye kya humlog bicycle ka spoke use kar sakte hai
G bilkul use kar sakte hain. By the way mene steel rod wala cloth hanger use kiya hai
Wese aap agar beginner ho to mein ap ko pvc pipe ka landing gear recommended karu ga. Agar landing mein expert ho to Steel rod ka landing gear bana lena. Warna hard landings se ye rod bend ho jata hai. Phir is ko baar baar seedha karna parta hai.
Ye PVC pipe landing gear ki video hai
th-cam.com/video/3dfkjzhCmbk/w-d-xo.html
@@AKElectroDIY no no i aint a beginner but i am bad at cutting parts and i dont have all materials toh mai thoda apne hissaaab se banata hun mera ka shape kuch jyaada hi dihedral shape mei ban gya but its ok i am finished with everthing except the landing gear and the canopy
@@tanujvyas2239 landing gear jo apko easy lage. Wese dono hi easy hain. Lekin pvc pipe wala durable hai. Hard landings se kharab nahi hota. Steel rod wala bend ho jata hai hard landings se.
What is that material
Foamboard
@@AKElectroDIY ok
@@AKElectroDIY only foamboard not Kraft foamboard?
Yes kraft foam board. It has a thin layer of paper on both sides of foam.
@@AKElectroDIY what kind of paper?
Sir ap na jo lipo battery use ki ha battery ka weight kita ha sirf battery ka weight please replay kara
120 grams
From which website to buy depron sheet online?
smarthobby.pk Its a Pakistani store. Are you from Pakistan?
No I'm from India
Are you from Pakistan
@@affanshaikh308 Yes I'm from Pakistan. As for India, I have probably heard of some websites that sell depron. You can check robu.in or flyingmachines.in
Sir jo ap na wing ma wood istmal ki ha ais aunchi kitni rakhni ha aur 4.5cm air foil per kat kar lagni ha ya ais ka picha lagani ha wood aur sir wood ki dono side ki aunchi kitni rakhni ha aur bich ma kitni aunchi rakhni ha please sir bata da
G 4.5 cm airfoil per wood lagani hai. Measurements video mein di hui hain. Aur jitni width sides se hai utni width center se hogi. Baqi Ap apne hisab se isko laga sakte hain. Ye siraf wing ko strong banane kay liye hai.
Sir 4.5cm sa aga sa katna ha ya picha sa katna ha airfoil
Aur sir wood ko auper sa bhi 3mm katna ha
Agay se. Wing kay agay wale part ko leading edge kehte hain.
cut in the video u messed up tht moment?
I can't understand what you mean?
this was just a joke sry dont take it serious ly
@@AKElectroDIY
Sir jo ap na wing ma wood istmal ki ha ais ko kisa banana ha please bata da muja samag nahi ai
Sir kitana cm sa katna ha auper sa katna ha ya naicha sa katna ya wood ko please explain kar da ma bhi pakistan sa ho please sir ap ki mahar bani ho gi explain kar da
@@MUHAMMADASHFAQ-n7p2g mein ne wood ka scale/ruler use kiya hai. book shop ya karyana store se easily mil jaye ga. 30 cm length hai. baki details video mein di hui hain. Agar koi question ho to pooch sakte hain.
Si kitna ki samaj nahi ai auper sa katna ha ya nicha sa katna ha 3mm aur lenth kitni rakni ha
@@MUHAMMADASHFAQ-n7p2g length jo scale ki hai wohi rakhni hai. Mere ki 30 cm hai. Aur 3mm neechay se katna hai. Is ki dihedral shape banani hai. Kaafi simple hai. Dihedral ka matlab hai wing thora sa uper hota hai sides se
Aur sir auper sa nahi katna aur aunchi 1.3cm rakni ha
Sir ap ki location kia ha ma bhi pakistani ho ma na bhi ya plane banya ha lakin auid nahi raha ha
Lahore
Kyun nahi fly ho raha? Kya ap ne weight check kia hai plane ka? Aur electronics konsi use ki hain?
@@AKElectroDIY sir weight 610 gm ha aur motor 1000 kv ki lagi hoi ha
Sir jo mera pass battery ha wo 2200mah ki ha weight 170gm ha chal jay gi
Phir fly karna chahiye kyun ke 1000 kv ki motor ki thrust approx 950 gm hoti hai. Ap ki battery theek hai? Kya motor full speed se chalti hai?
Bhai my TH-cam channel ON Eid
Sorry, I can't understand your comment. Can you explain it?
My channel name is techno experiment extra
@@AKElectroDIY sorry 😐 for this
@@technoexperiment1234 mera matlab ke ON Eid ka kia matlab?
@@AKElectroDIY matlab on Eid ka mera bhi channel hai techno experiment extra