1537 aileron servos should also be located as far Inboard as is practical. the use of the 'outermost' hole in a servo arm results in 1) the servo having the least amount of mechanical advantage and 2) Maximum aileron deflection. 1821 installation of the firewall should include glue fillets/miter bracing at its perimeter. 1826 the nose is Already elongated. now, the distance between the prop and main wing is even Greater.!!!
@@therobloxyoutuberfunny I bought from an online store. You might find one. But as he is saying, wood spar proves to be more lightweight and a better option. Also wooden rod is much cheaper and easily availabe.
541 the dom of bracing internal to the tail boom Should be tuned; aka TAPERED. 633 over-long elevator chord results in extreme responses to stick inputs.
Jo plan diya hai bas us ko copy kar ke plan bana lena. Exact dimensions na bhi ho to koi faraq nahi pare ga. Fuselage ki length wese approximately 85 cm hai.
Why download doesn't work? Why app. sizes? The info must be complete like from the the exact size of prop including its pitch, the bldc motor, the esc the servos; everything! So that even a layman who doesn't know the the ABC of Aeromodelling, should be able to make one.
@@RJ-py9ek Brother everything is mentioned in the video. The google drive link of pdf plan is given in description. The prop size is 1045, meaning 10 inch diameter and 4.5 pitch. The bldc motor is A2212 1000kv motor, 30A esc, and 9g metal gear servos. Can you tell me how can I improve this? Any suggestions?
Nice work bro meri aap se mulaqat hui hai lakin aap ka channel dekh k lag raha hai k main kisi western ka channel dekh raha hun videos kafi proper way main bani hui hain.
Em amigo faz um vídeo mostrando como configurar o radio flisky fs i6 , pra ativar o alarme quando a bateria do aero 3s chega a descarga mínima. Tenho medo de errar nas configurações, tipo mostra como configurar o máximo e o mínimo da bateria do aero 3s .🤝🏻 vai ajuda bastante gente .
Ok, will try to make a video on that. But you don't worry about experimenting with the settings, you can always reset in case of a mistake. As for the battery low alarm, it is activated by default.
@@AKElectroDIY o amigo verdade muito obrigado por a Dica , e muto bom tem a mizade distante que de uma atenção, tamos juntos. Vamos fica no aguardo do próximo video valeu🤝🏻
You mean the wire used as a pushrod? I simply used a steel wire that can found easily. It just need to be a metal wire that is just suitable for it. You can get it from an old umbrella.
The plans given are just to give an idea of the design. You don't need to get such a precise plan as on a4 paper. All you need to do is print the given plan and upscale it.
@@therobloxyoutuberfunny hmm... I think the motor Mount is the best option as it provides a good base for the motor and also the motor can be easily removed and installed again. You can directly install the motor too but the base should be strong as not to break from motor vibrations.
You can get about 1000 to 2000 rs. I don't know buying lipo online as I bought from physical shop. But You can Check these stores robu.in drkstore.in robotcraze.com
good work. except where it's not. it should be understood that the when Antique plans for a gas model are the reference for the design a foam electric-powered model, SOME things should NOT be copied exactly as shown.! one of those things is the use of a symmetrical main wing profile; which you have correctly not used. 011 SEE how the mass of the rudder and elevator servos SHOULD be located NEAR the cg.!?!? in order to do this, steel wire can be used for a longer pushrod, so long as the wire is adequately supported (with guides) along its length. or, a longer pushrod can be Fabricated using wood or bamboo and two short pieces of steel wire. they are SERVOS. not servo motors. 022 the distance between the prop and main wing is slightly excessive. that distance should be roughly equal to one (main wing) chord length. 419 this wire component should have ninety degree bends. the wire can be installed such that no hole needs to be made in the rudder. 700 (AS SEEN on the plans) servos CAN be Fully concealed within the Fuselage, NEAR the cg.!!! 740 it appears that the configuration of control horns is less-than correct. googletranslate
Thank you for thoroughly watching the video and telling me the mistakes I did. I learnt a lot from your advice. Will consider in my next build. Actually I am a beginner to this hobby. And as you know, beginners do mistakes, as I did. My main idea was just to simplify the process of making this.
1930 this is the WRONG/too-flexible type of prop. it can be seen that the prop has developed an abnormal curvature; from its prior MISUSE. a stiff E prop should be used. 2051 when the model is level, the main landing gear should be located Directly Below the wing leading edge.! this is not an opinion. the aft location of the mass of two servos has increased the amount of tail-heaviness in the model's dom.!!! 2030 this abnormal tail wheel assembly is Heavier than it Should be.! thus, making the TAIL heavier. 2148 the distance between the elevator and the cg Affects how the model responds to elevator inputs. in this case, that distance is slightly excessive.
827 the use of full strip ailerons is not recommended.! aileron chord length is excessive.! s/b equal to about twenty-five percent of the the wing chord. 838 WHAT THE HECK is that supposed to be. 1304 CF is HEAVIER than Wood.!!! when a heavy main spar component is used, the 'extra' outboard-located mass adversely affects the span-wise dom and roll axis stability.!!! 1403 install servos such at they do NOT protrude from the wing.!!! servos and linkages are 'safer' when located at the top of the wing. 1446 design of the 'base' of the control horns is flawed; resulting in their incorrect placement.!!! 1511 clevises are usually used the control horns.! the end of wire pushrod NOT correctly bent. the mass of wing-located servos should be located forward-of the main spar; eg., 30% of chord. googletranslate
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Very well made. Hope to see more videos like this
Thanks. I plan to make a lot more. Stay tuned!
1537 aileron servos should also be located as far Inboard as is practical.
the use of the 'outermost' hole in a servo arm results in 1) the servo having the least amount of mechanical advantage and 2) Maximum aileron deflection.
1821 installation of the firewall should include glue fillets/miter bracing at its perimeter.
1826 the nose is Already elongated. now, the distance between the prop and main wing is even Greater.!!!
Appreciated your advice👍🏻👍🏻
And can I find that carbon rod in any shops or online please let me know
@@therobloxyoutuberfunny I bought from an online store. You might find one. But as he is saying, wood spar proves to be more lightweight and a better option. Also wooden rod is much cheaper and easily availabe.
541 the dom of bracing internal to the tail boom Should be tuned; aka TAPERED.
633 over-long elevator chord results in extreme responses to stick inputs.
Amazing keep it up!!
Thanks 🙌
Very nice build. Congrats.
Thank you
O wow ,this one flyes really nice❤
Thank you! Cheers!
@@AKElectroDIY have a good day 👋
nicer
Thank you
Bhai bahut sahi bahut ache se banaaye ho bss mujhe pura plane ka fuselase rudder saara cheez ka exact dimension plan chahiye tha.....
Jo plan diya hai bas us ko copy kar ke plan bana lena. Exact dimensions na bhi ho to koi faraq nahi pare ga. Fuselage ki length wese approximately 85 cm hai.
Why download doesn't work? Why app. sizes? The info must be complete like from the the exact size of prop including its pitch, the bldc motor, the esc the servos; everything! So that even a layman who doesn't know the the ABC of Aeromodelling, should be able to make one.
@@RJ-py9ek Brother everything is mentioned in the video. The google drive link of pdf plan is given in description.
The prop size is 1045, meaning 10 inch diameter and 4.5 pitch. The bldc motor is A2212 1000kv motor, 30A esc, and 9g metal gear servos.
Can you tell me how can I improve this? Any suggestions?
Very good
Thanks
Nice work bro meri aap se mulaqat hui hai lakin aap ka channel dekh k lag raha hai k main kisi western ka channel dekh raha hun videos kafi proper way main bani hui hain.
Thank you, Hassan
Em amigo faz um vídeo mostrando como configurar o radio flisky fs i6 , pra ativar o alarme quando a bateria do aero 3s chega a descarga mínima. Tenho medo de errar nas configurações, tipo mostra como configurar o máximo e o mínimo da bateria do aero 3s .🤝🏻 vai ajuda bastante gente .
Ok, will try to make a video on that. But you don't worry about experimenting with the settings, you can always reset in case of a mistake.
As for the battery low alarm, it is activated by default.
@@AKElectroDIY o amigo verdade muito obrigado por a Dica , e muto bom tem a mizade distante que de uma atenção, tamos juntos. Vamos fica no aguardo do próximo video valeu🤝🏻
@@giramundo.You're Welcome ❤
2049 the span of the horiz-stab does not need to be greater than thirty percent of the wingspan.! excess stab span equals Excess Mass at the tail.!!!
I plane to make another edge 540 or extra ng plane. And will surely consider the advice given by you. Thank you so much. 🙌🏻
Bro can I ask u if I have any doubts while building this?
Yes why not! I'm here to help.
@@AKElectroDIY bro thank you so much
🎉🎉❤❤
❤❤
Excellent ❤
Glad you like it!
Bhai aap 3j wings Bhai ko janteho || janteho to dam heto Rc bird banakar dekho
Yes bhai mein janta hu. Ok Rc bird bana du ga. Ap ka matlab orthinocopter hai ya propeller wala real like rc bird?
@@AKElectroDIY ornithopter Rc bird banao
@@AKElectroDIYmene techno experiment extra channel per Rc bird banaya he Bhai dekh lena
Ok
My rc plain motor stopping at half throttle and recalibrating with esc,why it's happening?
That is because of battery
If the battery current is not enough to power the motor, then after exceeding a certain limit the esc will shut down and restart.
Is it so?
@@AKElectroDIY bro you also see this in your system?
@@AKElectroDIY ohooo,tank you so much lot.......❤.
Here I use 2s battery..2000 mah battery
What kind of wire is used to connect servo to aileron
You mean the wire used as a pushrod? I simply used a steel wire that can found easily. It just need to be a metal wire that is just suitable for it. You can get it from an old umbrella.
@@AKElectroDIY Can it be replaced with GI wire ? I was thinking of getting it from hardware store
@@yashnivalkar1131 Yes ofcourse. Just make sure that the small piece of wire you use for aileron does not easily bend
is the plan for a4 paper?
The plans given are just to give an idea of the design. You don't need to get such a precise plan as on a4 paper. All you need to do is print the given plan and upscale it.
@@AKElectroDIY thanks :)
What is the flight time of this rc plane
5 to 10 minutes depending on battery.
Where can i find the carbon rod?
Online shops. I got from a rc plane material store.
How to make motor mount?
Just take 5mm wood like mdf board or plywood and make the motor mount
@@AKElectroDIY thank you
@@AKElectroDIY are there any alternatives rather than motor mount?
@@therobloxyoutuberfunny hmm... I think the motor Mount is the best option as it provides a good base for the motor and also the motor can be easily removed and installed again.
You can directly install the motor too but the base should be strong as not to break from motor vibrations.
Can i make the wing foil from cardboard or thermocol because i dont have wood
Yes. It can be made easily from cardboard.
Just choose something that don't melt from heat of hot wire. Cardboard is a good option. But thermocol isn't
@@AKElectroDIY bro ur the best 😊 tysm!!
@@therobloxyoutuberfunny Welcome 💙
Bhaiya eska ye pdf mil jayega khya
Yes bhai, description mein pdf ka link hai
Please shere lipo battery buy link or price
You can get about 1000 to 2000 rs.
I don't know buying lipo online as I bought from physical shop. But You can Check these stores
robu.in
drkstore.in
robotcraze.com
@@AKElectroDIY your lipo battery price ? In offline
@@NTechidea. roughly 1000 to 1500 rs. I'm using 3s 1500mAh.
@@NTechidea. I got for 1400 rs
@@AKElectroDIY OK bro
good work. except where it's not. it should be understood that the when Antique plans for a gas model are the reference for the design a foam electric-powered model, SOME things should NOT be copied exactly as shown.! one of those things is the use of a symmetrical main wing profile; which you have correctly not used.
011 SEE how the mass of the rudder and elevator servos SHOULD be located NEAR the cg.!?!? in order to do this, steel wire can be used for a longer pushrod, so long as the wire is adequately supported (with guides) along its length. or, a longer pushrod can be Fabricated using wood or bamboo and two short pieces of steel wire. they are SERVOS. not servo motors.
022 the distance between the prop and main wing is slightly excessive. that distance should be roughly equal to one (main wing) chord length.
419 this wire component should have ninety degree bends. the wire can be installed such that no hole needs to be made in the rudder.
700 (AS SEEN on the plans) servos CAN be Fully concealed within the Fuselage, NEAR the cg.!!!
740 it appears that the configuration of control horns is less-than correct. googletranslate
Thank you for thoroughly watching the video and telling me the mistakes I did. I learnt a lot from your advice. Will consider in my next build. Actually I am a beginner to this hobby. And as you know, beginners do mistakes, as I did. My main idea was just to simplify the process of making this.
please make a proper plan
Ok will soon make and upload
@@namankasana420
Proper plans are uploaded
1930 this is the WRONG/too-flexible type of prop. it can be seen that the prop has developed an abnormal curvature; from its prior MISUSE. a stiff E prop should be used.
2051 when the model is level, the main landing gear should be located Directly Below the wing leading edge.! this is not an opinion. the aft location of the mass of two servos has increased the amount of tail-heaviness in the model's dom.!!!
2030 this abnormal tail wheel assembly is Heavier than it Should be.! thus, making the TAIL heavier.
2148 the distance between the elevator and the cg Affects how the model responds to elevator inputs. in this case, that distance is slightly excessive.
Bro can u help me make a plane please?
@@therobloxyoutuberfunny
Do you need any help? You can ask
@AKElectroDIY hello
@@therobloxyoutuberfunny
Yes
827 the use of full strip ailerons is not recommended.! aileron chord length is excessive.! s/b equal to about twenty-five percent of the the wing chord.
838 WHAT THE HECK is that supposed to be.
1304 CF is HEAVIER than Wood.!!! when a heavy main spar component is used, the 'extra' outboard-located mass adversely affects the span-wise dom and roll axis stability.!!!
1403 install servos such at they do NOT protrude from the wing.!!! servos and linkages are 'safer' when located at the top of the wing.
1446 design of the 'base' of the control horns is flawed; resulting in their incorrect placement.!!!
1511 clevises are usually used the control horns.! the end of wire pushrod NOT correctly bent. the mass of wing-located servos should be located forward-of the main spar; eg., 30% of chord. googletranslate
Thank you, again! ❤
Actually I just modified it as I liked. It turned out to be fine and flied good. But you are really correct. Appreciated!
Bro where can i get the battery charger ?
From online stores, or any electronics market
What type of battery charger can I use bro?
That is a dedicated lipo charger
Like
Imax b3
Imax b6
Etc
@@AKElectroDIY so I can use any of these?
@@AKElectroDIY what charger are u using?