Corvette/Camaro LT1 Fuel Injector Install - C4 Generation

This video shows the steps and gives tricks and tips on installing the fuel injection system on a 1993 C4 Corvette. Most Corvettes from 1992-1996 will have a similar setup.
Check out and subscribe to see my other auto repair videos at: / ozzstar
Corvette C4 generation fuel filter video: • Corvette Fuel FIlter T...
TH-cam: th-cam.com/users/ozzsta...
FACEBOOK: ozzstar
To see more Ozzstar repair videos visit: th-cam.com/users/ozzsta...
Mailing Address to send Ozzstar info or some cool swag:
Ozzstar
PO BOX 9291
Newark, DE 19714
Thanks for watching, commenting and subscribing! Take it easy - Ozz

[@DC.]

Do you have a video on the intake gaskets?

[@ozzstars_cars]

I have a two part series just for you. Search Ozzstar Corvette C4 Intake Manifold Gasket. Booom!

[@black_betty_the_94vetty]

Brother im just here to mark myself as SAFE from that gas explosion LMFAO! great video my man

[@ozzstars_cars]

Good to know we both made it out alive! 😂🤣😂👍

[@lindariley4037]

Did you ever take a video of the startup?

[@ozzstars_cars]

Yes, at the end of part 2 in the intake gasket manifold replacement video th-cam.com/video/NMomg9SXMs0/w-d-xo.html

[@ericzipko1159]

I have a 1993 Camero Z28 with a Golan Crate 383 Stroker with 30 pound an hour injectors. My mechanic Wallley just installed O rings to it. I understand the process niw. Thanks to your video.😊

[@ozzstars_cars]

Glad the video was helpful to you Eric.

[@strider99]

Another good one on the injectors. Seems like I might do these when I do the manifold gasket. Perfect time to do it.

[@ozzstars_cars]

Good idea! Thanks for watching

[@strider99]

I thought so. Thanks again for replying.

[@mrdeanv4414]

Great video and very informative... what fuel injectors would you recommend for a C4 95 factory bonestock corvette

[@ozzstars_cars]

Bosch 3, from Jon at Fuel Injection Connection, not a sponsor but tell him YTube Ozzstar's Cars sent you.

[@mrdeanv4414]

👍🏻

[@kieleagan]

Great videos on the C4's, they've been very helpful. Where can I find & purchase a repair manual like the one on the left side of your bench at the beginning of your video? I've only been able to find a Chilton & need something more in-depth.

[@ozzstars_cars]

The best place to purchase a Factory Service Manual is online. Buy a used one that someone no longer needs and save money. You should purchase both (2) books for the C4, LT1 there is also a supplemental book for the LT5 which was in the ZR-1

[@Elevated618]

your vids are so helpful!!!

[@ozzstars_cars]

Glad you enjoy them Neil, thanks for subscribing, see you on the next one! Take it easy - Ozz

[@BuceGar]

That is the cleanest engine I've seen.

[@ozzstars_cars]

Not bad for 59k miles at the time.

[@HaroldBennett12]

was that Chaos in the background stepping on a frog around the 9 minute mark?

[@ozzstars_cars]

that damn Chaos! lol

[@rossschultheis8098]

What is the stock lb injector size for a 1992 corvette? Looking to replace mine

[@ozzstars_cars]

22 lbs.I believe

[@rossschultheis8098]

@@ozzstars_cars i been researching like crazy i can’t seem too get a straight answer between 22lbs or 24 lbs your opinion I’ll take what’s your final answer? Haha

[@hasbeengood]

Hey Ozz! You gonna make a vid on how to get to the manifold and re seal it? Glad you were careful with that "gas"! Makes for a volatile atmosphere!

[@ozzstars_cars]

Yes Hasbeen, I am currently in the process of editing the film for the intake manifold gasket replacement. Stay tuned, it should be posted pretty soon. Gas eruptions can happen at anytime, be prepared!! lol

[@jds1vette]

I love silicone grease. Been using it for decades.

[@jimfrye8959]

another great video!!!!!! Much appreciated

[@ozzstars_cars]

Thanks Jim!

[@jimfrye8959]

@@ozzstars_cars You're most welcome. I did learn the hard way thou, that when replacing the O-rings on the injectors. I stuck the pick too far down, and it broke the plastic sleeve under the O-ring. One other thing that I found out was, at reassembly, when I got ready to install the new hard gaskets, that a couple of the old guide pins had broke off in the block, and I couldn't put the new gasket on until I removed the broken nylon pins with a pick. If ya ever do another video on this part of the engine, or a fuel injector change, Ya might want to mention these little tid bits.. Anyway, Your videos were a great help. I don't think I would've even attempted this without all your help. Thanks again.

[@dennisalstonZ06]

Hello quick question I have a 93 c4 I want to update the distributor to a c4 distributor with the vent tube I have a timing cover from a 94 do I need any more

[@ozzstars_cars]

Your calling the Optispark a distributor I believe? The vented Opti is a different design than that 92-93 model. Using the '94 Opti would require changing the camshaft because the end of the cam is designed to fit the vented optispark. Thanks for watching -Ozz

[@hondamancl450]

after I shut engine off it sounds like injectors are clicking for about 1 minute (not exhaust noise from heat)that's why I think fuel regulator is bad ,oil smells like fuel also ,just making sure what you think thanks again great videos

[@ozzstars_cars]

Injector leak down test. Fuel pressure check. Make sure the wiring is okay.

[@lt1_sam78]

Is there a way to change the pressure regulator without taking the fuel rail out?

[@ozzstars_cars]

Remove 4 bolts and 8 fuel injector connectors, and 2 quick disconnect fuel lines. Instant access and no double guessing

[@timothypatnaude7364]

Hello, What size and brand injectors did you install ?

[@ozzstars_cars]

They are factory original GM injectors.

[@pontiacmaniac7772]

My LT1 Firebird sputters under acceleration and idles rough. Could it be the injectors?

[@ozzstars_cars]

Sure, and about 10 other things. Sorry I can't diagnose cars over the internet.

[@ozzstars_cars]

Remember engines needs spark, fuel, air and compression.

[@corvetteman67]

GREAT JOB!!!!!!!!!!!!!!

[@ozzstars_cars]

Thank you!

[@shucklemaster11teamblue95]

good video is this how you clean a fuel injections on a 1994 camaro

[@ozzstars_cars]

This is how you remove fuel injectors on an LT1

[@chainshawz4476]

I also have a 93 corvette convertible. What are the best injectors I can install in your opinion? I want something better then stock but I dont want to dump fuel with too much lb/hr

[@ozzstars_cars]

I would stay with 24lb for a stock engine. If you decide to do an intake and full exhaust then no more than 30lb. Multitec are the OEM. The Bosch III would be a good choice, that's what I would use.

[@jeffshaw3126]

@@ozzstars_cars thank you!

[@ozzstars_cars]

I recommend installing new Fel-Pro Fuel Injector o-rings to prevent leaks: amzn.to/2uainaP

[@baddriversofnorthtexas6850]

thought I was listening to Joe Rogan for a second

[@ozzstars_cars]

Not sure if that's a compliment or a slap in the face. haha Thanks for watching

[@wyzmaro9774]

Lmao Gas Explosion Alert!

[@ozzstars_cars]

8:55 mark, warning. :)

[@Hardasscustomsllc]

great video quality!⛥⛥⛥⛥⛥

[@ozzstars_cars]

Thank you Andy. Not bad for an expensive HD camcorder I bought about 9 years ago. Take it Easy -Ozz