1110 Vinyl Ester Resin
ฝัง
- เผยแพร่เมื่อ 1 ม.ค. 2014
- Click here to see this product & more on Fibreglast.com:
goo.gl/ljq9Wo
Tough and Corrosion Resistant
Our #1110 Vinyl Ester resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. The properties of this resin allow it to withstand impacts and repeated flexing without developing cracks.
#1110 has a low viscosity, making it perfect for resin infusion applications. It can also be used for hand lay-up or spray applications that require excellent corrosion resistance, impact strength, and tensile elongation.
Shelf Life Limited to 3 months. (Hetron 922)
This resin is formulated for 1.25% MEKP catalyzation. #1110 can be purchased alone or as part of a Resin and Hardener Kit.
1110/69-F kit contains (1) QUART RESIN, (1) 69-A.
1110/69-A kit contains (1) GAL RESIN, (2) 69-A.
1110/69-AK kit contains (4) GAL RESIN, (8) 69-A.
Thank you, Mister Data.
Fibre Glast
What type of resin would you recommend if the fiberglass is going to have a foam core? I believe the foam is either EPP or EPO, but I don't remember offhand.
Can i use vinyl ester resin for chopped strand mats? I was told i cant use epoxy but vinyl ester resin is between epoxy and poly ester. Something about a bonding agent that does not dissolve in the mats.
Hi I live in NY and have an area on the side of my boat that needs fiberglass work, about 3 ft and 3 inch wide layup. I can put heaters on the area. How long will it take to cure completely? Asking so that maybe I'll buy vinyl ester resin instead of epoxy if it will cure faster.
Can you laminate with this or do you need a resin w/o wax?
Which resin is used in the manufacturing of the bus parts...Vinylesters or polyesters or epoxy is preferable?
sir, one more thing, can i apply epoxy resin over polyester resin for waterproof concrete surface expose to sunlight and under tiled areas like toilets..
You can put Polly over both Polly and vinyl but can’t go over epoxy. Epoxy to epoxy only
you no longer have this in stock. Will you be getting it back in stock?
Which resin would be good in nitrocellulose?
sir ,how to know how much amount of catalyst should be added to the resin so that it does not becomes like jelly easily and doesnot solidifies fast ??
If catalyzed at the appropriate ratio (1.25%) it will offer you a pot life of 20-30 minutes at normal room temperature.
thank u :)
Is the 1110 a "sandable" resin or does it need wax added to it.?
Hello, yes our #1110 Vinyl Ester Resin is sandable.
Can i apply vinyl ester resin on concrete?
Hi sir
Do I use vinyl ester residence for making as plastic chip like motherboard or charging light chips.
Please write me.
Thanks
Hi Steve, our vinyl ester resin is meant to be used in a composite setup with a reinforcement fabric such as fiberglass as well.
@@fibreglast instead of fiber glass mat can we use glass fibre strads
does vinyl ester resin work for wood working?
Could you explain what you're trying to do? That way I can give you a more accurate answer.
great viduocan we mix polyester with vinyl ester together?also every 100 g of vinyl ester you add 1.25 g of hardener? or notthanks
+eng.student ma Good questions. We wouldn't recommend mixing the two for your project. If you need help deciding on which resin is best for you, check out our White Paper on laminating resins here: bit.ly/1R3E8yZ or, for a overview on resins you can look at our blog post: bit.ly/1kRrqXZ
You are correct for the hardener to resin ratio, for 100 g of Vinyl ester, you'll want 1.25 g of hardener.
thank you so much, I checked the two links and find it very interesting and contain very good iformation.
My research is about making composite used in structure.
I might use the sites as a reference if thats ok
You are more than welcome to. Let us know if you need anything else and we'll be happy to help
ok thanks alot.
can i apply polyester resin over vinyl ester resin for water proof
Yes you can. But you will need to scuff up the surface of the existing vinyl ester resin in order for it to adhere properly.
Fibre Glast sir, yesterday i finished first coat over concrete and lay fibre glass mat over it and i apply 2 second coat over this mat with vinyl resin .but i am not satisfy with this finish with in two or three days i can apply polyester resin over it hope that it will work out
@@fibreglast thank you sir
is this suitable for casting? if yes also mixed with metal powder?
Hello, this is Adam with Fibre Glast. This resin is best suited for creating composites infused with fiberglass, carbon fiber, or Kevlar. It is not a casting resin.
@@fibreglast thanks for the quick answer! can you recommend a high temperature resin that allows casting?
@@flow3278 you're welcome! Could you give me a little more information as to what you're trying to make? Then I can try to recommend something.
@@fibreglast i am trying to build a miniature combustion engine for an "art" project. it should be functional therefore it requires a casting material that can withstand 100+°C. the metal powder adds the texture. does such a resin exist?
@@flow3278 unfortunately we don't carry a casting resin designed to handle those types of stresses.
1110 resin rates