I followed this and used same fork tool to pop the clips. I Worked very carefully to work the clips loose, but under the tape, I dented my fender in multiple locations and didn't realize until I took the tape off. Super disappointed.
@@blackmaddog09 that is very unfortunate. You have to be careful prying against metal. I did not pry on the fender or suggest that. The tape is meant to prevent scratching the paint.
You did way too much work to get the grill off, the pieces under the head lights pop out on one end by the grill and the grill slides out right past them. They pull away with one hand, had my grill out in under ten minutes and the only bolts I had to remove were the ones on top of the grill.
If it’s the corner pieces, I’d remove them completely and see if the clips separated. If the clips are off you can put them back on the corner moulding and install it again.
Really helpful, thanks!
Concise and no fluff. I like this vid.
I do it the way Jeff mentions. But what I’ve always got a hard time with is removing the front camera harness.
I followed this and used same fork tool to pop the clips. I Worked very carefully to work the clips loose, but under the tape, I dented my fender in multiple locations and didn't realize until I took the tape off. Super disappointed.
@@blackmaddog09 that is very unfortunate. You have to be careful prying against metal. I did not pry on the fender or suggest that. The tape is meant to prevent scratching the paint.
You did way too much work to get the grill off, the pieces under the head lights pop out on one end by the grill and the grill slides out right past them. They pull away with one hand, had my grill out in under ten minutes and the only bolts I had to remove were the ones on top of the grill.
th-cam.com/video/t1sC5GdhsI4/w-d-xo.html
Any advice on how you pop them back in? Hit a bird & it popped the front grill side out of the corner holder a little bit.
If it’s the corner pieces, I’d remove them completely and see if the clips separated. If the clips are off you can put them back on the corner moulding and install it again.