ESP8266 Based Smart Energy Meter using Google Firebase
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- In this video, I will show you how I made my own DIY smart energy meter, allowing us to see the live reading of the energy meter from remote places.
You will learn how to take readings from a conventional energy meter using ESP8266 (Node MCU) and measure voltage and current using ZMPT101b & ZHT103. Then we will use GOOGLE FIREBASE for uploading the data to a real-time database.
Here you will get the codes and circuit diagram: github.com/circuiTician/Embed...
If you want the Android app contact me via my Facebook page.
Facebook: / circuitician
Instagram: / circuitician
You can purchase the Items from here ------------------------
Node MCU: amzn.to/3ylCMZS
Voltage Sensor ZMPT101B: amzn.to/36aF8yB
Current Sensor ZHT103: amzn.to/2Unpa1z
Energy Meter: amzn.to/3htBncR
Optocoupler 817: amzn.to/36fDFqA
USB CABLE: amzn.to/2TwMHNo
#smart_energy_meter
#iot
#BE_CREATIVE
#INDIAN_TECH_CHANNEL
#BASIC_ELECTRONICS - วิทยาศาสตร์และเทคโนโลยี
puro professional lagche.. noice work bhaiya...!!
Shera toh 🔥🔥
This video is on someother level than your previous videos, it looks more professional and asthetic loved it 😀👍, keep up the good work dada
Stay tuned for next video
Oshadharon 💥💥💥
You are doing really very well and I must say your editing is really very good.keep it up dada
Darun darun hoyeche dada
Amaaazing outlook 💖💥
Hi Circuitician, great work,
Well done bhai...... Keep educating the mass.....great job
nice n great work , bhaai, good initiative which helps many technical students n enlightens many young minds , once again bahoot badhiyaan bhai
This is really interesting! Carry on.
Darun...carry on 👍
Khub bhalo hoyeche babu
Darun dada...very nice ❤
This is just Wow!
Waiting for more IoT projects dada ❤️
Darun :))
Grt work ❤️❤️😊
😮 great !
Nice Project😘
Sera hoeye...
Tui r koto jaigai clutch korbi bol? 😅😅
Very nice project
superb
Wow ❤️❤️❤️❤️
Great ❤️
Great
🔥🔥🔥🔥
🔥
Vari nice
😍😍
❤️❤️
Varigood
Does it have really need to use analog energy meter as you already used volt and current sensors ?
Thanks
In case of AC to measure energy you need 4 items
Energy = voltage × current × powerfactor × time
So the process will be little bit difficult.
If you use a energy meter instead the energy measurement will be more accurate
@@circuiTician Got it, thanks for your reply. If we want to monitor only kWh then I need only energy meter, optocupler & Node MCU. No need of ads115, voltage and current sensors ?
Thanks
Yes you can do that for sure
@@circuiTician would you please help me in getting the android app and other configuration. Thankyou
Contact me via instagram
Brother, please tell this! In one circuit diagram (5:27 )depicting the ADS1115, ZHT103 & ZMPT101B connections u shown a diagram with A.C supply to current sensor, where as in the GIT HUB schematic diagram , (1&2) terminals have that C.S has no a.c supply , why?
Basically there is no terminal in the CT sensor.... You have to loop the wire from the middle of the CT sensor (zht 103)
What is pullup and cool down arrangement?
you can see my video on arduino for pull up and pulldown arrangement
Hello, sir, I used a cloud meter and the consumotis very high so I want to ask if you have any solution for it
What do you mean by consumotis?
You used single phase A.C supply, right(phase n neutral) ? But u said 230V D.C ?
No it's 230 volt AC ... May be I mistakenly said D.C
@@circuiTician until how much voltage this zmpt can withstand, bro
I would not recommend to use more than 250 volt... And it is always good to check the data sheet
sir is it posible to connect the blynk iot app to firebase?
Yes possible
@@circuiTician sir do you have tutorial about that?
No
Also at first u shown the , CURRENT SENSOR, at the while plotting them on the board, i see there is no circuit board , except coil ? Why ,
There was a problem with the circuit so I placed the coil only....
You an check the circuit diagram for reference
Hy Sir! how to get the same readings of Voltage, current and poer on our mobile app invertor using google firebase rather then buying the meter from market( which is too costly). kindly make a video or please guide in a reply. Thanks
For sensing anything you need a sensor. So for measuring voltage current and power you will need some sensors.
And it is the cheapest way of measuring all these.
If you are from India then the meter will cost 200 rs.
@@circuiTician Hy sir! i have bought ZMPT101 voltage sensor, hall effect current sensor and all i want to interface these sensor with esp-32 mcu and get the values of power, voltage and current used by each home automated device on the mobile app via google firebase. I hope you would explain this whole in detail. Will be very thankful to you
There are different videos on each topic on my channel... So you have to watch them all and merge the codes and circuit according to your need.
Bro how can we make prepaid energy meter iot based
Yes why not
Sir where is kodular video link ? And how to get bill sir
This is a project not an product so you can't get bill. It will show only in app.
And the app is not open source
How much cost this total project prize
If you want to make by your own then you can check the description for components.
Or if you want to buy the whole set up then DM me in instagram or facebook
Dada, would u please respond on any social media interface, please , i am doing a project on this
Instagram
How u given power supply to those elctronics in pcb ? Underneath? Do this ZHT 103 works or calculates based on hall effect? Also WHY U GIVEN DIRECT A.C SUPPLY TO THOSE ELECTRONICS INSTEAD D.C ? SOFTWARE USED FOR CODE EXECUTION N COMPILING , DUMPING ? BRO
Watch the full video again carefully.
ZHT is a CT sensor
I am powering the pcb using a usb cable through Node MCU.
Coding ide and other things all is shown into the video
Please