Chiller Load Calculation | Load Capacity | Animation |

Chiller load calculation determines the cooling capacity required for a chiller to maintain a desired temperature in a specific space or process. It essentially estimates the amount of heat the chiller needs to remove to achieve this.
The primary formula used for chiller load calculation is:
Q = (m * ΔT)/24
Where,
Q is the heat removal rate in Tons
m is the mass flow rate of the cooling fluid (e.g., gallons per minute)
ΔT is the temperature difference between the entering and leaving chilled water (degrees Fahrenheit)
BTU Meter Explained
• BTU Meter Explained | ...

[@TanveerKhan-hj9lp]

Thanks Sir for uploading this video, I learn alot from your videos 😊

[@zebralearningsenglish-pn6fl]

It's my pleasure ❤️

[@javeedhvactechnician7760]

th-cam.com/video/Do9qHCRcwaY/w-d-xo.htmlsi=u6zBXU0Ka-vihwxy

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@faisal-hw5cm]

Very informative video 👍👍👍

[@zebralearningsenglish-pn6fl]

Thanks a lot ❤️

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@JavedIqbal-hr2xc]

Informative video. How to calculate the inlet & outlet temperature of chilled water.

[@javeedhvactechnician7760]

th-cam.com/video/jzi4sGJo1iM/w-d-xo.htmlsi=sPorzbekrf3FvrL4

[@smritidasmahapatra7950]

So informative thanks sir.
Please explain the function of bypass valve and how to maintain delta t..?
And explain different chiller particle issues ...

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@vikrambabu4720]

Hello thank you for the good video and why we divide it with 24? Could you please know me. Is it for 24 hrs?

[@zebralearningsenglish-pn6fl]

Yeah, I will explain it in a separate video.

[@vikrambabu4720]

Hi Thank you and you efforts are much useful to the learners like me.

[@zebralearningsenglish-pn6fl]

@@vikrambabu4720 Happy to help always 😊

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@elanchezhian.selanchezhian2374]

அருமையான பதிவு, நன்றி.

[@zebralearningsenglish-pn6fl]

மிக்க நன்றி.

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@srinivas9391]

Thank you sir for your information 🙏

[@zebralearningsenglish-pn6fl]

Always welcome 😊

[@safwanchappu5560]

Primary pump and secondary pump video apply

[@zebralearningsenglish-pn6fl]

The video making is in the process. Will upload soon.

[@roshankumarsahoo4942]

Hey,
You have mentioned the wrong Flow direction in 0:48. But if it is correct then in the later video when you are giving an example of temp. 1:18 If water is flown into the chiller the temp. should be 54.6deg F and if water is going out from the chiller it should be 42.4deg F i.e. chilled water going to AHUs.
Please let me know if i am correct.
Waiting for your response.

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@kennethlobo4420]

How do u derive 12.1 multiplying factor?

[@zebralearningsenglish-pn6fl]

12.1??? 12.2°F???

[@zekielgamezone]

Explain hot gas bypass

[@zebralearningsenglish-pn6fl]

Sorry for late reply. I will make it soon.

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@HVACengineer93]

1TR=2.4 gpm not applicable here 2867 divided by 2.4 should be the load on chiller approximately

[@zebralearningsenglish-pn6fl]

TR is rate of heat transfer and GPM in rate of water flow. So we can't compare these both values. And we have derived this formula clearly in a separate video.
The link for the video is below.
Chiller Load Calculation Breakdown
th-cam.com/video/FSt7A4vYUWw/w-d-xo.htmlsi=B1cMVHko79OvMG6e

[@cyerilibanez5130]

good day sir,please explain what is 24?

[@javeedhvactechnician7760]

th-cam.com/video/Do9qHCRcwaY/w-d-xo.htmlsi=u6zBXU0Ka-vihwxy

[@srinumaradana9971]

Why we take 2867 gpm and gpm 2867 number constant for any tr caliculation of chiller

[@zebralearningsenglish-pn6fl]

No, that is the water flow rate. We used that value for an example. The value will vary based on the flow rate.

[@balajic8907]

Can pls make video cooling tower parameter tds,ph,condtivity,ect

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@achmaddermasyafii6861]

The calculation of ∆T is from condensor, righ? Can we calculate ∆T from evaporator too?

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@قناةالقرآنالكريمبثمباشر]

Hello, can you send me a link to the simulation program for cooling and heating systems?

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@sonusrk1249]

How to know gpm how can you Add 2000 Tr is 2867 gpm please explain sir

[@zebralearningsenglish-pn6fl]

GPM you can know from the water flow meter. All chiller plant is installed with a water flow meter.

[@MdashharRashid]

How we know the water flow rate

[@zebralearningsenglish-pn6fl]

You can check that from the meter which is connected in the pipeline or in the BTU meter.

[@Rps945]

Hi what will be the District Cooling plant load requirement for 20000TR

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@jamesprabakaran4017]

Sir what is 24 ?
24 means hr.

[@zebralearningsenglish-pn6fl]

I have explained about 24 in the below video. Please watch. Thank you.
th-cam.com/video/FSt7A4vYUWw/w-d-xo.html

[@jamesprabakaran4017]

@@zebralearningsenglish-pn6fl Thank you very much sir

[@tohidkhaji]

526.5 kwh
Please reply

[@zebralearningsenglish-pn6fl]

Good...👍

[@mubarakzaib1076]

What is 12.5

[@javeedhvactechnician7760]

th-cam.com/video/KQEh6t7pdCw/w-d-xo.htmlsi=vg_B1ADUoqk6iHOB

[@prakashksp2918]

Please update video in Tamil
Please

[@zebralearningsenglish-pn6fl]

Yeah sure, I will upload soon.

[@villagegallery8531]

In this formula how do i get flow rate ( gpm ?

[@zebralearningsenglish-pn6fl]

The flow rate you can get from the meter installed in the pipeline.