@@CarlAyers-x8hAnyone watching this video has access to a store. Cellphones and the internet don't magically appear in the jungle. Especially since they would need a ruler/straightedge and a pill bottle and a saw. All these things come from stores, or are delivered to your home.
@@marrodriguez6173 While you're correct, this is the worst marking gauge I have ever seen. All you need to make a proper marking gauge is a piece of wood, a drill bit, and a nail. I do sort of like the idea that this one has a built in ruler. That being said, the fact that it's on a round body and doesn't scribe just makes it worthless.
Yeah you need a flat 90 degree or it's more chance of human failure but I would be able to use it my granpa could use a lot more simple objects and it still got straight the old guys have 90 degrees and straight lines etc built in their muscle memory
Здравствуйте. И вообще когда нужно произвести разметку, надо на линейке напильником сделать надпил, взять нет не взять, а купить какие-то лекарства дождаться когда.... Нет это не по мне, берём линейку отменяем сколько нужно через расстояние ставим вторую точку соединяем точки всё.
I've always gotten a little satisfaction and a lot of humor outta how blown away people who aren't in the trades, can sometimes be, when they see you scribe a perfectly straight line on something, with your tape, pencil & finger!
@@tom5256 you're thinking backwards. "Combination squares" are basically a ruler with an adjustable stop used to repeatedly measure and mark the same length or angles. They don't have notches for a pencil or marking tool. "Speed squares" are right angled triangles with pitch angle marks, measurements, and pre-cut notches to do the exact job shown in the video. Most commonly used by carpenters for cutting angles for roof trusses and length measurements for ripping boards length wise. Combination square. en.m.wikipedia.org/wiki/Combination_square Speed square. en.m.wikipedia.org/wiki/Speed_square
Si moves el dedo si es tu método también va a medir mal ,yo lo uso mantengo firme los dos extremos y siempre,siempre,queda bien,genio,aporta algo mejor que con gusto lo usaremos y no te dediques a criticar las buenas ideas de los que las tienen y las comparten ,pásame alguna buena idea tuya fuera de las criticas
@@luissilvera7103pumpkin or squash. Google says pumpkin but most zapallo I grow from South America are closer to what English speakers call squash (butternut squash, acorn squash and similar).
Не многие знают, но в Евлидовых "Началах" помимо точки, прямой и пр. был ещё один постулат, о котором решили забыть - бесполезная ебалка. И вот её идеальный пример.
Or two pieces of wood screwed together clamping the ruler so there’s an actual trustworthy 90deg angle. Or…. an actual purpose built tool that’ll last forever and do a great job. Honestly, this technique would take longer than simply marking points along the edge and setting the ruler to join the dots.
I can dig this. I wouldnt toss my self made metal work, but if i just needed a strsight line, i could put this together and make it work. Probsbly do it. It would give me big food for thought concerning durability in general. Thsnk uou@
Идиотизм. Штангенциркуль сейчас стоит копейки. Даже электронный. Страдаете херней, тупо что бы занять место на сервере и украсть по минуте жизни у людей.
Вау, большое спасибо за видео! А мне 36 лет, к сожалению я инвалид. Я тоже создал канал, и пытаюсь как то двигаться в этом направлении,правда пока мало чего получается( Пишу этот комментарий ,просто чтобы пожелать всем хорошего настроения) Главное не унывайте, все будет хорошо! Всем удачи!)
Удачи в канале, но этот способ не рекомендуйте. Спилив начало линейки вы уже теряете точность. Можно конечно точно сделать пропил на 1мм и потом уже добавлять 1мм ко всем размерам, но это нужно показать и объяснить в видео. Может это и будет контентом для вас... показал это видео, а потом показал как улучшить эту самоделку
А что мешает, уважаемый автор, вам взять и воспользоваться руками вместо зажимов из крышек? Всё равно же ведь держите её чтобы не открутилась об край. 😂
Für grobe Messungen wo es nicht auf 1 -2 mm nicht deauf ankommt . Dafür ist das ist das eine super idee ein einfaches praktisches Upcycling Werkzeug zu basteln . Kreativ und Geniale Idee den Deckel und die Verschraubung als Klemmechanismus zu nutzen .
I just use a tape measure for framing, siding, rough fitments for any project, just pinch your hand at the length you want and and use the bottom finger of your pinch to guide along the edge of your material, then rest your pencil on the dummy end of the tape and slide along your material, you're welcome 😊
But what if you forget your carpenters square or left it on a job this is a good idea little things like this can help get a job sometimes you have to adapt
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
Good gadget to ensure everything is 1mm out of tolerance
Good morning
And that's where we use what's called "algebra".
Not to mention he has to keep his ruler at exactly 90 degrees otherwise he'll just draw perfect arcs
На 3😂
This is for a home owner to cheap to buy a tri square.
Adjustable squares.
Available at any good hardware/DIY store.
Precise, accurate and they don't have a tendency to roll...
Not everybody's got a store around them.
Or the money.
@user-pu2ho4ip3d Improvisation isn't a precise discipline.
Waste of time, energy and materials.
Make do doesn't do.
@@CarlAyers-x8hAnyone watching this video has access to a store. Cellphones and the internet don't magically appear in the jungle. Especially since they would need a ruler/straightedge and a pill bottle and a saw. All these things come from stores, or are delivered to your home.
@@CarlAyers-x8hnormally I agree. But…bitch they used a hacksaw to make this. THEY USED A SAW THEY BOUGHT AT THAT VERY STORE.
All Chinese crap never seen square
I could take the time and put the effort in to make this tool. Or I could just use the multiple tools designed specifically for this scenario
Not everyone has all the tools especially in countries like Cuba
@@marrodriguez6173 While you're correct, this is the worst marking gauge I have ever seen. All you need to make a proper marking gauge is a piece of wood, a drill bit, and a nail.
I do sort of like the idea that this one has a built in ruler. That being said, the fact that it's on a round body and doesn't scribe just makes it worthless.
SON TECNICAS DE APOYO , PARA NECESIDADES ESPECIALES, CUANDO NO CUENTAS CON LA HERRAMIENTA, NO PARA QUE LA SUSTITUYAS.
@@marrodriguez6173
Well if you can make this you at least have a ruler, and you're better off just using the ruler to scribe.
Lol a rounded edge. This isn't a pro trick, pros use a square.
Or the end of the tape measure
Yeah you need a flat 90 degree or it's more chance of human failure but I would be able to use it my granpa could use a lot more simple objects and it still got straight the old guys have 90 degrees and straight lines etc built in their muscle memory
No we use are hand
على حافه تكون مستقيمه
You don’t see combination squares on job sites anymore. The speed square took over
I'm not a pro, but I seem to manage quite well with a good combination square.
Or a proper woodworking gauge , designed especially for drawing parallel lines
Давайте будем честными,никто так делать не станет...я просто одной линейкой сделаю несколько точек, и соединю их
Здравствуйте.
И вообще когда нужно произвести разметку, надо на линейке напильником сделать надпил, взять нет не взять, а купить какие-то лекарства дождаться когда....
Нет это не по мне, берём линейку отменяем сколько нужно через расстояние ставим вторую точку соединяем точки всё.
А потом оказалось что доска карамыслом)
@@fokka_mast9318это линейка Стейтона!😮
Угольник Свенсона купить и не морочиться
Это для слабаков)))@@aba2r
That's not a carpentry hack but, that carpenter is definitely a hack!
You can call him a carpenter 🤣😊🙏🏼
I've always gotten a little satisfaction and a lot of humor outta how blown away people who aren't in the trades, can sometimes be, when they see you scribe a perfectly straight line on something, with your tape, pencil & finger!
That's what they make tri square's for any Carpenter has one !!!
You mean a combo square.
Lies. "Good carpenters" have them.
@@fatboy1603you mean speed square?
@@Dwill545combination squares will do it, speed squares are a bit harder to do that with.
@@tom5256 you're thinking backwards.
"Combination squares" are basically a ruler with an adjustable stop used to repeatedly measure and mark the same length or angles. They don't have notches for a pencil or marking tool.
"Speed squares" are right angled triangles with pitch angle marks, measurements, and pre-cut notches to do the exact job shown in the video. Most commonly used by carpenters for cutting angles for roof trusses and length measurements for ripping boards length wise.
Combination square.
en.m.wikipedia.org/wiki/Combination_square
Speed square.
en.m.wikipedia.org/wiki/Speed_square
Perfect for making a smooth NON-linear line.
Needs fixed 90 degrees rather than variable 180 degrees.
You're right - it's a bit more versatile when used like that. 👍
That is just absolutly brilliant, I wish I had seen this before I bought my $4 trisquare...
Hopefully you kept the reciept…
This is how we learn friend.
Keep the tri square
Omg usw the right tools for the right work.
Finger works perfectly.. never done a cut line wrong.. ever !!!
That's exactly how I do it...carpenter for forty years....accurate to a sixteenth...
Prove it.... 🤗😆
@themistalista measure twice, cut once son !!
Like every carpenter does 😂 This non-pro making these “pro tip” videos is just a waste of time
Wrong.....
You can rotate off the cap...
Making the line inconsistent......
Si moves el dedo si es tu método también va a medir mal ,yo lo uso mantengo firme los dos extremos y siempre,siempre,queda bien,genio,aporta algo mejor que con gusto lo usaremos y no te dediques a criticar las buenas ideas de los que las tienen y las comparten ,pásame alguna buena idea tuya fuera de las criticas
Como se dice zapallo en ingles?
@@luissilvera7103pumpkin or squash. Google says pumpkin but most zapallo I grow from South America are closer to what English speakers call squash (butternut squash, acorn squash and similar).
@@luissilvera7103Se dice Zapalleis.
WATCH IT AGAIN
Cool trick ! Thanks.
Thanks my friend 👋🤝 I'm glad you liked it 👍❤️
Wow excellent
Thanks my friend 👋🤝❤️
Positively BRILLIANT! Thank you.
Not at all
О точность размеров линии можно забыть. Да и кому она нужна при поиске лайков.
Не многие знают, но в Евлидовых "Началах" помимо точки, прямой и пр. был ещё один постулат, о котором решили забыть - бесполезная ебалка. И вот её идеальный пример.
Simple and practical. Great idea.
Just pinch the rule with your fingers and run them along it, no BS needed
Or two pieces of wood screwed together clamping the ruler so there’s an actual trustworthy 90deg angle. Or…. an actual purpose built tool that’ll last forever and do a great job. Honestly, this technique would take longer than simply marking points along the edge and setting the ruler to join the dots.
Dang!!! I wish I saw this before I bought my adjustable tri-square 😐
🤗😉👋❤️
😢😢😂😂😂😂😂@@Tips_Workshop
Great idea💡!
Thanks my friend 👋🤝❤️
A good pro would rather make a trip to Home Depot instead
I can dig this. I wouldnt toss my self made metal work, but if i just needed a strsight line, i could put this together and make it work. Probsbly do it. It would give me big food for thought concerning durability in general. Thsnk uou@
I’ll stick to my combi square
Nominado a la NASA. Muy práctico gracias
It’s content people. I believe this person does know about squares. The point is to show what you can do without. Let it go
👍👋🤝❤️
You dorks, it's called content people 😂 yip any friggen crap content, that will make them money, and B/S everyone around. Darrrh.
Nonsense. Buy a square
Why on earth would you do that ?
obrigado por me ensinar esse truque legal,, agora posso fazer umas medições mais preciso
Just buy a marking gauge, perhaps it's all been thought out hundreds of years ago, and NO plastics!
Mil Gracias por compartir...amo conocer otros modos de simplificar el trabajo.🌹
Идиотизм. Штангенциркуль сейчас стоит копейки. Даже электронный. Страдаете херней, тупо что бы занять место на сервере и украсть по минуте жизни у людей.
Еще в каменном веке придумали рейсмус для таких ,инженеров'!
Great job young man
Thanks my friend 👋🤝 I'm glad you liked it 👍❤️
I have a combo square for that.
as a 6 years old with 54 years of experience in carpentry, I can verify that this video is not what the carpentry world deserved but what it needed.
That's what they make a trip sq. For any carpenter has 1 !!
Sure this'll be a little rough, BUT thumbs 👍 for building on his idea 💡
Thanks my friend 🤝👋❤️
If you don't mind the mark being within 10mm 😅
Simply amazing!
Вау, большое спасибо за видео! А мне 36 лет, к сожалению я инвалид. Я тоже создал канал, и пытаюсь как то двигаться в этом направлении,правда пока мало чего получается( Пишу этот комментарий ,просто чтобы пожелать всем хорошего настроения) Главное не унывайте, все будет хорошо! Всем удачи!)
Удачи👍💪
Удачи в канале, но этот способ не рекомендуйте. Спилив начало линейки вы уже теряете точность. Можно конечно точно сделать пропил на 1мм и потом уже добавлять 1мм ко всем размерам, но это нужно показать и объяснить в видео. Может это и будет контентом для вас... показал это видео, а потом показал как улучшить эту самоделку
Макс:🤒👁️✍🏻🧑🏻🦼🧑🏻💻
Great idea
Excelente enseñanza maestro ❤
Я понимаю когда не чем заняться лутче не заниматся
A damn good idea!
Thanks my friend 👋🤝 I'm glad you liked it 👍❤️
this must be government sponsored.
Nice Thanks for the idea
I'm glad you liked it my friend 🤝👋❤️
Премию Нобеля и звание академика этому ихобретателю
Gostei da ideia, parabéns
А что мешает, уважаемый автор, вам взять и воспользоваться руками вместо зажимов из крышек? Всё равно же ведь держите её чтобы не открутилась об край. 😂
EXCELENTE IDEA, GRACIAS POR SUS ENSEÑANZAS, DIOS LOS BENDIGA
Get a life.
This is brilliant .....thanks giving mast idea....means good idea.❤
Νο
Hey, skilled trades person here, been in the industry for 45 of the 36 years I’ve been alive and I can say this is how the pros do it.
I'm keeping that one ❤
Thankyou ❤
Für grobe Messungen wo es nicht auf 1 -2 mm nicht deauf ankommt .
Dafür ist das ist das eine super idee ein einfaches praktisches Upcycling Werkzeug zu basteln .
Kreativ und
Geniale Idee den Deckel und die Verschraubung als Klemmechanismus zu nutzen .
I mean, making something useful out of scraps is a good thing, but there are a couple of flawd in this design, which would render it unusable.
That's cool thanks for the tips
👍 brilliant
Thanks my friend 👋🤝 I'm glad you liked it 👍❤️❤️❤️
Ah chulada eh!!!👏👏👏
I just use a tape measure for framing, siding, rough fitments for any project, just pinch your hand at the length you want and and use the bottom finger of your pinch to guide along the edge of your material, then rest your pencil on the dummy end of the tape and slide along your material, you're welcome 😊
Thanks, good!
round base to make sure you never get the desired distance or even make the line straight
THIS IS GENIUS !!! 😎😎😎
Good idea
Thanks my friend 👋🤝❤️
Wow, that was cool. I love it.
Gollĺlyyyy! How did I ever live without this ingenious creation?! 🫤
Super !
Gentle man you would have done with square container..... but still excellent 👍
Nice job 👍
Thanks 🤝👋❤️
Muy ingenioso y util,lo boy a Aser.
Wow! Amazing idea!
Thanks bro 👋 I'm glad you liked it
Belíssima idéia..... parabéns!!!!!!
But what if you forget your carpenters square or left it on a job this is a good idea little things like this can help get a job sometimes you have to adapt
Yes my friend, you are absolutely right 👍🤝 And in general, it is very cool when a person can come up with a way out of any situation👍❤️❤️❤️
you just have to remember to carry:
an empty pill bottle
a hacksaw
a tri-square file
a 6 in. steel rule
I have this thing called a "combination square," and another called a "marking gauge." You should try those sometime. 😉
Muy buena idea...espero recordarla para hacerla 😊😅
Increíble!!!!
Se inventó la lima de acero, que come hacia ambos lados...
Excelente idea
Wow. Can’t believe how no one sees potential uses that an adjustable T square couldn’t do.
Nice work 👍🎉
Exelente. Calidad. Gracias
Buena, excelente idea
Oh wow!!! Qué gran idea
Astuces génial bravo
Would this hack work in imperial measurements?
this is on budget tooll, professional has good reliablle and calibrated tools that help them to maximaze their skills and efficiency
Every non carpenter in America just said “Honey do we have any empty vitamin bottles”.
You got it! 😊👍❤️
Nice tip👍👍👍
A straight line! But with a lot more steps!
No “pro” in their right mind would use something like this.
Remember only the pro's know😂😂
Kereenn 👍👍👍
great invention
Nice job
thanks👍
Well done sir
Smart system 👍🏽👍🏽👍🏽👍🏽👍🏽
Good idea 🎉
Nice idea❤❤