There are so many "tips & tricks" videos on TH-cam that are just crap that I've nearly stopped clicking on them altogether. BUT! *THIS* one is different; this is full of genuinely useful information and it's presented well to boot. The techniques are easy to understand, practical, and to-the-point without any extraneous filler. Quantum Tech HD earned a new subscriber today; thank you!
No solutions are not clear : Which glue you use for filling holes on the 1st example ? The 2nd with the pvc pipe is not an example, the 3rd with cement is for a professional. the 5th and 6th for DIY tiling are good. For the 7th with a cogwheel, none information on the materials use for the mold or the other between the mold and the wheel, the same.
@@fronck-93of course you have to watch the full videos in the creator's own channel. Quantum tech only show you the sped up summary of what he's doing.
This isn't generally useful. The "tips" are so time consuming that you're better of spending a couple bucks to replace a cog, or really poor substitutes (like for buying tile). Given that they don't have basic tools (like a good "flush cut saw" for trimming pegs), they don't seem like they're anything more than a clickbait channel
Several of these techniques look really good, but if your splinter-wood cabinet door is broken like that, you toss it out of the window, then burn it, and then buy a proper wood cabinet. Because you deserve nice things in your life.
@@umaedu3097 It is epoxy resin. It works by adding a tiny bit of a catalyst to the resin, which makes it quickly "set" and become hard. The green stuff is just fibrous material. What it is exactly doesn't matter, but it is probably wood-shavings from pressure-treated wood. Epoxy has it's uses, but it is very expensive and often ugly. Using it to repair a splinter-board cabinet door makes little sense to me, as real wood is cheaper than a bottle of epoxy, and looks better to boot. :)
Love all of these! My husband made a screen top for a 20 gallon fish tank that I was using with grow lights for an indoor plant nursery. The cat kept getting into it so he made the screen top and it looks exactly like yours only it fits a fish tank. This world runs because of people like you! Thank you for sharing your ability with the rest of us.
Good video, but those louvres will fall out within a year of normal use. The glue joints are all end grain to long grain. A slight bump or even normal wood expansion and contraction will break the bond and the pieces will fall out.
Ce serait plus long et je ne suis pas bricoleuse mais avec un cadre solide, des chevilles à chaque coin ça pourrait aller (et si on veux pouvoir régler l'angle des ouvertures on pourrait ne fixer que 2 coins de cette manière et relier les autres à un cordon)
@@mikg.7576 At the bottom of this response is a video of a guy making adjustable blinds. If you don't want them adjustable you can alter the design and add glue to the smaller "step" pieces. And use two pins per slat at the ends. Or cut slots in the stiles as indicated in a response above. (This could leave you with an exposed sloppy joint though, unless you cut a piece of veneer to cover the ends of the slots or can make exactly precise mortises for the slats. If you're not ever going to see the back of the louvres, or can live with the look, and want fixed slats, your simplest option is probably to cut small glue blocks that are slightly shorter in length than the width of the slats, and glue that to both the end of the slats (on their back faces) and the stiles. (Cut thin strips out of the slat material, about square, and then cut off about 3/4" long pieces. Imagine about 3/4" long section of the square top of a wooden chopstick.) So you have a little block of wood glued to the back side of each slat which is also glued to the stiles. Just make sure you are cutting the blocks out of longer strips, and not cross cutting them off the ends of slat material. You want long grain to long grain for gluing. th-cam.com/video/l4HjBX0Mceo/w-d-xo.html
I hope that's a joke. Almost all of this is so time-consuming and low-quality that you'd need to be really poor and/or desperate. Buying parts and building a screen is almost never better the just buying a screen. It a new gear wheel. The cost of the stuff you need to buy is about as much as what you'd buy without wasting your time
But gotta admit, the guy did a really clever job with this video. If I could pull off something like that, for sure, the wife at my place would love it, ahaha.
I love the brick roller. Reminds me of the specialty pastry and cookie rollers I've seen. I'd love to make one to customize some cardboard stuff and fabric prints I make.
I'm assuming the "brick" uses hardi backer as a substrate. Brilliant. Also, if you're only going to purchase one forstner bit, do so for door and cabinet hardware.
Many of these ideas could be adapted further ie: Paint magnet could have an adjustable strap so it can be used on different siza cans: Magnet sown into waterproof plastic fabric with Velcro male to female ends for end connection AKA: reusable, 🤓💡
Le pediría que añadiera los materiales que está usando, qué resinas, cantidades, etc. Muchas gracias por sus videos. I would ask you to add the materials you are using, what resins, quantities, etc. Thank you very much for your videos
I really like these life hacks for millionaires. The first is with fixing the door. Buy a pipe, buy epoxy resin, buy PVA glue, find wood shavings somewhere. Buy white paint (to paint over this I shit, smeared, sculpted). It's cheaper to order a new door.
Tile is being combed with motor the wrong way. Key is to comb the mortor with the shortest side of the tile so when you collapse the mortor ridges majority of the the air can escape for proper coverage.
Would be good if details of what type of resins, glues, and powders were being used and why! Without that detail much of what is shown is usless to anyone wanting to make use of it, to fix things.
There are so many "tips & tricks" videos on TH-cam that are just crap that I've nearly stopped clicking on them altogether. BUT! *THIS* one is different; this is full of genuinely useful information and it's presented well to boot. The techniques are easy to understand, practical, and to-the-point without any extraneous filler.
Quantum Tech HD earned a new subscriber today; thank you!
No solutions are not clear : Which glue you use for filling holes on the 1st example ? The 2nd with the pvc pipe is not an example, the 3rd with cement is for a professional. the 5th and 6th for DIY tiling are good. For the 7th with a cogwheel, none information on the materials use for the mold or the other between the mold and the wheel, the same.
@@fronck-93of course you have to watch the full videos in the creator's own channel. Quantum tech only show you the sped up summary of what he's doing.
Still some valuable ideas nonetheless, I liked the change from the more EXPENSIVE Versions, 😊👍
This isn't generally useful. The "tips" are so time consuming that you're better of spending a couple bucks to replace a cog, or really poor substitutes (like for buying tile).
Given that they don't have basic tools (like a good "flush cut saw" for trimming pegs), they don't seem like they're anything more than a clickbait channel
If you have a blown hinge and need to repair, go get automotive body puddy. As a cabinet maker I have used body puddy numerous times. Works great.
I did it with pattex "mille chiodi", and it holds up pretty well.
You mean Bondo?
1:06 This breaks again after one week.
😅😅😅ĵ
Do you mean body putty?
Such good ideas but captions with what type of adhesives or resins etc, are being used would help :)
UV cured epoxy can be used as well, but it looks like he was using simple JB weld.
Several of these techniques look really good, but if your splinter-wood cabinet door is broken like that, you toss it out of the window, then burn it, and then buy a proper wood cabinet. Because you deserve nice things in your life.
Can you tell what he used in the first clip...what is that green stuff and what kind of glue is that?
@@umaedu3097 It is epoxy resin. It works by adding a tiny bit of a catalyst to the resin, which makes it quickly "set" and become hard.
The green stuff is just fibrous material. What it is exactly doesn't matter, but it is probably wood-shavings from pressure-treated wood.
Epoxy has it's uses, but it is very expensive and often ugly.
Using it to repair a splinter-board cabinet door makes little sense to me, as real wood is cheaper than a bottle of epoxy, and looks better to boot. :)
@@Scapestoat thank you kindly 😊
Love all of these! My husband made a screen top for a 20 gallon fish tank that I was using with grow lights for an indoor plant nursery. The cat kept getting into it so he made the screen top and it looks exactly like yours only it fits a fish tank. This world runs because of people like you! Thank you for sharing your ability with the rest of us.
You are awesome! Thanks for sharing
. Please, next time indicate which products are you using
This is really informative and useful. Thank you for this amazing video.
Good video, but those louvres will fall out within a year of normal use. The glue joints are all end grain to long grain. A slight bump or even normal wood expansion and contraction will break the bond and the pieces will fall out.
Thanks for the info. What solution can i apply for this problem?
@@mikg.7576 Cut slots into the frame for the louvres as well as gluing them
@@catclark9488 thanks a lot
Ce serait plus long et je ne suis pas bricoleuse mais avec un cadre solide, des chevilles à chaque coin ça pourrait aller (et si on veux pouvoir régler l'angle des ouvertures on pourrait ne fixer que 2 coins de cette manière et relier les autres à un cordon)
@@mikg.7576
At the bottom of this response is a video of a guy making adjustable blinds. If you don't want them adjustable you can alter the design and add glue to the smaller "step" pieces. And use two pins per slat at the ends. Or cut slots in the stiles as indicated in a response above. (This could leave you with an exposed sloppy joint though, unless you cut a piece of veneer to cover the ends of the slots or can make exactly precise mortises for the slats.
If you're not ever going to see the back of the louvres, or can live with the look, and want fixed slats, your simplest option is probably to cut small glue blocks that are slightly shorter in length than the width of the slats, and glue that to both the end of the slats (on their back faces) and the stiles. (Cut thin strips out of the slat material, about square, and then cut off about 3/4" long pieces. Imagine about 3/4" long section of the square top of a wooden chopstick.) So you have a little block of wood glued to the back side of each slat which is also glued to the stiles. Just make sure you are cutting the blocks out of longer strips, and not cross cutting them off the ends of slat material. You want long grain to long grain for gluing.
th-cam.com/video/l4HjBX0Mceo/w-d-xo.html
this is by far the best you tube hack videos in existence.
This has been the best and realistic repair videos \ post I've seen, well done !
Agreed. Better than some of the trashy click bait crap you see.
I hope that's a joke. Almost all of this is so time-consuming and low-quality that you'd need to be really poor and/or desperate.
Buying parts and building a screen is almost never better the just buying a screen. It a new gear wheel. The cost of the stuff you need to buy is about as much as what you'd buy without wasting your time
Really good video. Loved the door repair. So useful. Thanks
Totally agree with Dan below....So much basic crap on fixes on YT, But this is outstanding - Thanks
Love that gear repair trick!👍👍👍
Now that was agood DIY video,we need more like that.
Acho que você é um gênio!! Muita criatividade para resolver tudo! Muito obrigada!
Danke,hat zufällig ein langes Problem gelöst,gewusst wie😊! Bravo!
A great idea, you can also use superglue with soda, for such a repair of the place under the hinges
But gotta admit, the guy did a really clever job with this video. If I could pull off something like that, for sure, the wife at my place would love it, ahaha.
Ну советы хороши в этом видео, главное чтобы люди понимали например что они делали когда дверь чинили и что с чем смешивали! И так далее!
not a "clickbait garbage&dangerous" tips&tricks ... finaly, good video!
Esse canal é muito bom... Um abraço do Brasil!
😅😅😅 :😅😮真、:
Wow finally diy hacks that are not total crap. Thank you. I will subscribe.
凄いアイデアですね🤗🎵見てて楽しかったです♪♪
I love the brick roller. Reminds me of the specialty pastry and cookie rollers I've seen. I'd love to make one to customize some cardboard stuff and fabric prints I make.
waste of materials
Bravo!! Bravo!! Bravo!!
Today on "when money isn't a option" we do whatever the first video is about 😅😂😅
Brilliant! Thank you for sharing
Jó lett! Pont kétszer annyiba került a javítás mint egy új ajtó
After all this 5-minute-craft-bullshit it was really amazing to see this good repair-video.
Thanks for this
Спасибо, очень полезные советы!!!
Espectacular...Muchas gracias. 🇨🇴
Wow, these tips and hacks are actually very good. Thank you.
saya suka dengan ide-idenya...
Kreatif👍
جميل ما قدمت لك مني كل تقدير
I'm assuming the "brick" uses hardi backer as a substrate. Brilliant. Also, if you're only going to purchase one forstner bit, do so for door and cabinet hardware.
I thought it was drywall.
Deus de dê em dobro todos os ensinamentos .......muitas bênçãos em toda a sua vida🍀🍀🍀🍀
Great! These are wonderful tricks! Thank you so much!"
БлагоДарю за полезную и нужную информацию.) Всем МИРа.)🌹🌹🌹🌹🌹
Me a encantado el vídeo, espero que subáis más vídeos de este estilo!!!! 😃😃😃👍🏼🤜🏼🤛🏼
That first hack is awesome actually they are all great. 👌
amo esses vídeos,adoro criar minhas próprias tralhas com todo respeito ❤❤❤
useful ideas, great videos
Inspiring, as ever.
Fantastic ! Thank you
Well done and bravo.👏👏👏👏👏👏👏
Which type of resin is that for the door hinge repair?
very usefull
Many of these ideas could be adapted further ie: Paint magnet could have an adjustable strap so it can be used on different siza cans: Magnet sown into waterproof plastic fabric with Velcro male to female ends for end connection AKA: reusable, 🤓💡
WOW...great ideas 💡 ✨!!! I will definitely use some of these ideas. THANKS 😊
this guy's a genius!
Thx, the fly screen for me personally is the most usefull
Super video.
những meo văt này cưc kỳ hiêu quả của thơ sữa chữa, cảm on ban đã hia sẽ
Brilliant video great Ideas .❤
Мне совершенно это не нужно, но завораживает!👍👏👏👏
Clever ideas and expertly shown.
Yooo this video is good for handyman
Best video in this field!
Спасибо вам за информацию!.
The last one is simply amazing!!!
Brilliant 👍
Thanks for the tips that you gave
love, love, love this instruction!!! blessings and be well
A few principles of sculpture in this episode ❤
Super cool tips and tricks!
Grandioso. Dios dame esas manos también!
Theres some great ideas here, thanks !
Very good👍
Très bonne astuce
thanks because the featured image did not disappoint me.
Brilliant tips..! 👍🏻
Thanks from Egypt 😊
Excelentes ideas 🎉🎉🎉
All I can say is WOW.....Thank you so much, great information. Subscribed.
Le pediría que añadiera los materiales que está usando, qué resinas, cantidades, etc. Muchas gracias por sus videos. I would ask you to add the materials you are using, what resins, quantities, etc. Thank you very much for your videos
Nice video ❤❤❤
Love from india
I really like these life hacks for millionaires. The first is with fixing the door. Buy a pipe, buy epoxy resin, buy PVA glue, find wood shavings somewhere. Buy white paint (to paint over this I shit, smeared, sculpted). It's cheaper to order a new door.
Best tip was the bottle top on the hammer, practical and money saving if you only using occasionally.
Merci..!
Very much useful tips
I want to try it, too. I'll try to succeed in Korea, too
Great ideas 🤗
Muito bom o canal heim!
Qué máquina!
Good video good ideas . I love it. Thank you
Tile is being combed with motor the wrong way. Key is to comb the mortor with the shortest side of the tile so when you collapse the mortor ridges majority of the the air can escape for proper coverage.
Sou apaixonada em marcenaria. Parece fácil, mas não é impossível
Sorta funky .. but I like it!
👏👏👏👏 Olé, me quito el sombrero
Would be good if details of what type of resins, glues, and powders were being used and why! Without that detail much of what is shown is usless to anyone wanting to make use of it, to fix things.
😮😮😮 Thanks for ideas
What were the products used to fill the osb in the first segment. And why did you used two different things?
Automotive body puddy will solve your problem. You don't have to guess.
It is two part epoxy.
@@CemKalyoncuThe one in the right is. What's the one on the left? Wood glue and...?
Wood glue and saw dust
cum and rat droppings
excelente video
Thanks
Pretty cool! But with all those subtitles you probably could have told us what glue or whatnot you are using
Perfeito! Principalmente, a última dica da porta.
nice work!
What great ideas
Ok, everyone show your hands if at some point during this video. You said to yourself. “Damn, I wish I would’ve thought of that.” ✋
Tip 1...just buy a forstner bit for your drill and move the feckin hinge. Way easier than that bollox and done in five mins.