💨🏎Just started the new Rotax Junior Max engine up for the first time - 👉awesome😀 -
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- 💨🏎Just started the new Rotax Junior Max engine up for the first time - 👉awesome😀 - can't wait for some track time.
🤝 Sponsors Needed 🤝
More information can be found on Sam's webpage:
samstoner.raci...
samstoner.racing
SamStone...
/ samstonerracing
/ samstonerracing
/ samstonerracing
/ samstonerracing
Thanks to 💪Ric @puttycad for helping lift the kart, not light!
#rotaxmax #rotaxmaxevo #rotaxjunior #rotaxjuniormax #racing #karting #kartinglife #racinggokart #racinggokartengine #strawberryracing #creamengines #otk #tonykart #tonykart401racer
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
You might not wanna rev the engine like that without warming it up and before breaking it in. This will increase wear a lot
The kart / engine was pretty new to us but was really second hand - so the engine had already been run in but from what others are saying, we still shouldn't rev like so.
These engines are built for power- not durability. Their warning up system is a lot different since it is derived from an aprilia 2 stroke 125. Made single speed, with a centrifugal clutch and an extremely good powerband which you will never ever see in a motorbike engine. The fuel is already packed with 2 stroke oil, the oil leaks through a tiny opening in the piston ring (only one piston ring) through to the 2 holes to the bearings, crank and combustion chamber- which, by then, is already heated from the combustion cycle. It is only imminent to “blow up” or sieze in the first couple of milliseconds. But it doesn’t due to the wiring looms cut off valves which it recognises. It then desintegrates and is burned in the combustion chamber, allowing for a better warm up system than your own car. (I am a 15 year old who built multiple rotax max engines at 14)
That's how you warm up this engine, you have to rev it out
Guess we all have our own way of interpreting how to warm the engine up, we kind of start of slow now and leave it to warm gradually before pushing the revs up.
Ohhh, YEAH!!!!!!
R.I.P the engine
The engines still going strong today.
rotax engines are really reliable and rarely seize unlike x30 and ok
That's what we hear about the X30, touch wood our Rotax Junior engine has been pretty reliable.
@@SamStonerRacingrotax are unbreakable, like really unbreakable
Sure if we push it hard enough!!
prolly already figured dis out but the bearing hanger on the back axel is loose
When we got the kart, we were told it was fine to and leave it as is! and that it didn't affect the kart/performance!
@@SamStonerRacing oh I see cool cool I jus know how expensive this shit is
Yeah, we're kind of working out how expensive karting is - like you say, it ain't cheap.
@@SamStonerRacing I just got my Rotax fr 125max running after like 13 years and it cost me like 1200$ to get that mug going again man are they fun even though it’s not an evo
It is so that the kart can flex well in the corners
Where did you buy one
We got that kart from Strawberry Racing but there's loads of places you can get one from and at a much cheaper price.
@@SamStonerRacing any recommendations
@SamStonerRacing any recommendations for where to buy and they ship to Africa
Sorry couldn't help you as to how you'd get it to Africa.
@SamStonerRacing okay, thanks for your help
I have a senior max
Might need one of those for next year!
What size rims are for junior rotax . I just got one 😅.
Hi Josh, we use OTK MXC/MXJ with the dry tyre and AXP rims with the Wets.
Your profile says you live in Florida/Orlando - Pretty sure there's an OTK factory in Orlando and if that is the case, then MXC's will probably be the rim of choice there!
@@SamStonerRacing what size for the rears 210 mm or 212mm
According to the Tonykart.com website MXJ are 210mm, it shows the MXQs as 212mm but not sure what they are used for!
@@SamStonerRacing what size do you use ?
We use standard OTK 210mm MXJs
I still want a tesla kart to be created
Well, there is the Rotax electric karts in use now!!
That's true 😂 I'm old
What chassis
Tonykart 401R - 2021
What kind of chassis is that and did u get a bundle for both engine and chassis
Hi Ryan, its a Tony Kart 401R 2021 chassis and year when we got it, it came as a bundle - so just add fuel.
@@SamStonerRacing ok thank
@@SamStonerRacing what website did you buy the kart on
We spoke to Strawberry Racing in Sheffield direct, we live in Leeds so they are not that far from us but there are plenty of other choices. Knowing what we know now, I'd probably got the kart a lot cheaper and possibly done more checks of the kart!
@@SamStonerRacing ok thanks
Daddies money
Too right, there's no way Sam could have afforded this!
And ? He's like 14yo how tf did you want him to buy this ? Stop hating because people are happy
Yes. How else is a 14 year old meant to buy a whole package worth over £4,500? Looking at your page, im guessing you couldn’t even afford to buy one considering you don’t care about what you “own”. Driving a motorbike straight into a massive puddle and face planting flooding your engine and your gear, putting your helmet at risk of writing it off and cracking. If you bought it yourself, you would’ve known what to do and how to take care of yourself. Since I could hear your mum laughing in the background, you must’ve done it because you’re the “family comedian”.
so oily
Yeah seemed it.
@@SamStonerRacing dont know how to start a rotax correctly stop revving it so much
Imagine complaining that a cold 2 stroke is oily 😂😂
@@fazesalv8707 you meant to do that lol
@@thomasspearing5133 no you don't need to rev them hard cold just get them up to 25 degrees min water temp and then it will be ok.