How to Remove Front Door Panel 2014 Honda Accord 2013 2015 2016 2017 What you need to Know

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • Need to get something fixed behind your door panel like the speaker, window motor or regulator, mirror electrical plug or even your door control and lock assembly, follow along and I will explain how you can do it..Enjoy...
    S8E413
    Visit my Store for cool Merchandise
    teespring.com/...

ความคิดเห็น • 28

  • @McKays_NF
    @McKays_NF ปีที่แล้ว +3

    I used your video to guide me with removing the door panel. I have an accord ex-l with a couple extra lights and speakers similar to yours. You did a great job with explaining the task. Thank you!

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      You're welcome and thanks for watching too...

  • @scottguthrie8074
    @scottguthrie8074 9 หลายเดือนก่อน +1

    Excellent Video! Clear and concise! Make more...ur good!!

    • @alyoungcuda
      @alyoungcuda  9 หลายเดือนก่อน +1

      Thanks and thanks for watching too...

  • @scarfacepaco8333
    @scarfacepaco8333 ปีที่แล้ว +1

    Do you have a video of replacing the motor ? I have a 2015 accord. The passenger rear window goes down sometimes does go up unless I keep trying, I’m guessing it’s the motor

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      th-cam.com/video/iOWNr--yZm4/w-d-xo.html

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      Basically the same for a rear

  • @SolutionMan02
    @SolutionMan02 2 ปีที่แล้ว +2

    excellent explantion

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +1

      You're welcome and thanks for watching...

  • @billhostetler9747
    @billhostetler9747 ปีที่แล้ว +1

    I am trying to replace the window switch on the drivers side of a 2014 RDX, it is very similar to the car you are working on in the video. I have the 3 tabs loose on the arm rest but it will not lift out. It seems to be a solid piece that has the molded plastic go back and under the armrest. Do I need to take the whole door panel off? I have removed the plastic triangle and the 2 Phipps acres from the door lever and broke free the body panels but something is stopping it from releasing.
    What is the simplest way to replace the drivers side window switch? Thank you

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      The window switch panel must be removed . Under that is another screw thats holding the center of the door panel on..on this car there is another clip inside the curve part and like in your car, it might be the thing holding it in

  • @leytt7885
    @leytt7885 2 ปีที่แล้ว +3

    Damm, good job!

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +1

      Thanks for watching...

  • @Sellsor
    @Sellsor ปีที่แล้ว +1

    I have broken glass inside the door behind the part you said was the water seal and the foam piece. I got the window replaced by a repair shop but clearly they didn't get the broken glass out inside there. Is it safe to remove and put back without special glue or tools? I can't seem to find any videos on it

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      Most of the time the sticky stuff stays sticky and can be re used, otherwise duct tape can be used also after you vacuum up the broken glass.

    • @Sellsor
      @Sellsor ปีที่แล้ว +1

      @@alyoungcuda thanks man! I'll try it out

  • @uchie3702
    @uchie3702 2 ปีที่แล้ว +1

    So my driver door dosent work in or out on my 2014 Altima , I seen a view videos on how to dis assemble , you think I’ll be able to remove my door panel without having to open my car door?

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +2

      The problem I see is going to be with the seat in the way..on a different car,I removed the seat nuts from underneath the car and tilted the whole seat towards the back area to give me room..you might need to do that in order not to break anything and to get the door panel off in 1 piece.

    • @uchie3702
      @uchie3702 2 ปีที่แล้ว +1

      @@alyoungcuda much help thanks for the input!

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +2

      @@uchie3702 its rare that both handles won't release the lock but things are made of plastic nowadays...good luck...

    • @uchie3702
      @uchie3702 2 ปีที่แล้ว +1

      @@alyoungcuda long story short , before I owned the car the driver door was kicked repeatedly so there’s a dent on the door Im hoping once I remove the panel I’ll be able to put everything back in place but most likely some damaged parts

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +2

      @@uchie3702 its possible a clip broke off the lock mechanism for the lock and unlock portion and not the inside and outside door handle part of the lock.

  • @45primo
    @45primo 2 ปีที่แล้ว +1

    Great video

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +1

      Thanks for watching...

  • @codigouea
    @codigouea 2 ปีที่แล้ว +1

    THANK YOU!!! Now time for me to the same

    • @alyoungcuda
      @alyoungcuda  2 ปีที่แล้ว +1

      There you go, you have a starting point...

  • @johnjkizer6399
    @johnjkizer6399 ปีที่แล้ว +1

    Thank u

    • @alyoungcuda
      @alyoungcuda  ปีที่แล้ว +1

      Thanks for watching....